Return to supplier page
Zonyl™ MP 1200 by Chemours is a free-flowing, PTFE, powder-based lubricant. It enhances non-stick, anti-friction, gloss and surface smoothness properties. It is a good electrical insulator, does not absorb water and shows resistance towards weathering. It imparts low surface energy and reduces wettability. It improves properties like corrosion inhibition, rub- and slip resistance. It is used in combination with polyethylene waxes to obtain the desired degree of property modification. It increases lubricity and wear in plastics and elastomers. It can be used at temperatures from -190°C to 250°C and is inert to nearly all industrial chemicals and solvents. Recommended load level of Zonyl™ MP 1200 is 1-3% by weight. Zonyl™ MP 1400F by Chemours is a white free-flowing, PTFE powder-based lubricant. It is a good electrical insulator and does not absorb water. It shows resistance towards weathering and reduces plate-out and friction. It provides low surface energy and anti-stick surface. It improves lubricity and wear in plastics. In this grade surface blemishes are minimized in injection molded thermoplastic parts. It can be used at temperatures from -190°C to 250°C and is inert to nearly all industrial chemicals and solvents. Recommended use level is up to 20% for plastics, to enhance non-stick performance and tribological characteristics. Zonyl™ MP 1400F is suitable for polycarbonates, polyacetals, polyamides, polyesters, polysulfides and polysulfones. Zonyl® PTFE MP 1600 by Chemours is a free-flowing PTFE powder acts as an additive in other materials. It imparts typical fluoropolymer attributes such as non-stick, lubricity and low friction. It provides gloss and non-stickiness. It is approved by FDA and reduces wear and blocking in the product. It can act as a thickener or enhance performance under severe conditions, when added to lubricants. It contains less of acid end groups, so chemical incompatibility is virtually eliminated. Zonyl® PTFE MP 1600 is used in composites and polymers. Zonyl™ FSA by Chemours is lithium carboxylate, anionic fluoro-surfactant. It provides good corrosion inhibition at very low concentrations. Zonyl™ FSA imparts anti-orange peel performance. Zonyl® MP 1300 by Chemours is a free-flowing, PTFE, powder designed for use as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water and highly resistant to weathering. It imparts low surface energy and reduces plate-out, friction and wear in plastics. It improves performance in lubricants under severe conditions. It enhances non-stick performance and tribological characteristics. Surface blemishes are minimized in injection molded thermoplastic parts. Zonyl® MP 1300 is suitable for polycarbonates, polyacetals, polyamides, polyesters, polysulfides and polysulfones. Zonyl® MP 1000 by Chemours is a free-flowing PTFE powder-based lubricant. It imparts low surface energy and enhance performance in lubricants under severe conditions. It provides anti-stick surfaces and reduces surface abrasion, friction and wear in parts. It is a good electrical insulator, does not absorb water and is highly shows resistance towards weathering. Zonyl® MP 1000 by is suitable for polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides and polysulfones. It is also used in elastomers include acrylates, fluoro-elastomers, neoprenes, nitriles and silicones. Recommended usage for plastic is 5-20% by weight. Zonyl™ MP 1100 by Chemours is a free-flowing, PTFE, powder-based lubricant. It imparts low surface energy and reduces wettability. It improves properties like corrosion inhibition, rub- and slip resistance. It is used in combination with polyethylene waxes to obtain the desired degree of property modification. It is a good electrical insulator, does not absorb water and is highly shows resistance towards weathering. It enhances non-stick, anti-friction, gloss and surface smoothness properties. Zonyl™ MP 1100 increases lubricity and wear in plastics and elastomers. It can be used at temperatures from -190°C to 250°C and is inert to nearly all industrial chemicals and solvents. Recommended load level is 1-3% by weight. Zonyl™ FSN-100 by Chemours is ethoxylated, non-ionic fluoro-surfactant. Offers anti-fogging and reduces plasticizer migration. It is suitable in fluoro-polymer. Zonyl™ MP 1400 by Chemours is a free-flowing, PTFE powder designed for use as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water and highly resistant to weathering. It imparts low surface energy and reduces plate-out, friction and wear in plastics. It improves abrasion resistance, performance in lubricants under severe conditions and lower the coefficient of friction. It enhances non-stick performance and tribological characteristics. Surface blemishes are minimized in injection molded thermoplastic parts. Zonyl™ MP 1400 is suitable for polycarbonates, polyacetals, polyamides, polyesters, polysulfides and polysulfones. Recommended dosage level is 1-3% by weight. Zonyl™ FSO by Chemours is ethoxylated, non-ionic fluoro-surfactant. It also acts as an internal lubricant and coupling agent for fillers. It reduces plasticizer migration and exhibits UV resistance and anti-soilant.
Zonyl™
Polymer additives supplied by Chemours
Zonyl™ by Chemours is a portfolio of white, free-flowing polytetrafluoroethylene (PTFE) resins used as an additive. They have small particle sizes ranging from 2-20 µm and a low molecular weight. They can be used in thermoplastic parts, like gears.
_x000D_
_x000D_
_x000D_
_x000D_
Key benefits offered by Zonyl™ are:
_x000D_- _x000D_
- Enhance abrasion resistance _x000D_
- Reduce the coefficient of friction and mechanical wear _x000D_
- Reduce surface contamination _x000D_
- Modify appearance _x000D_
_x000D_
_x000D_