Anti-static Agents for Plastic Compounds

Atmer™ 1013 by Cargill is a short term internal, quick acting and migratory anti-static additive for use in polyolefins (PE, PP) & flexible PVC. It can be dispersed evenly through the polymer in the melt phase.

• It migrates to the surface of the polymer where it interacts with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.
• It reduces dust contamination & handling problems and improves demolding.
• Atmer™ 1013 is used in caps & closures and film applications.
• The recommended dosage level is 0.2-0.6% in injection molding.
• It has a shelf life of 1 year.

Atmer™ 129 by Cargill is bio-based, quick acting, internal anti-static agent. It offers mold release, improved demolding & process lubrication and shows synergistic effects with ethoxylated amines. It can be dispersed evenly through the polymer in the melt phase.

• It migrates to the surface of the polymer where it interacts with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.
• It is suitable for polyethylene (PE), polypropylene (PP), ethylene vinyl acetate (EVA) and polyvinylchloride (PVC).
• It is used in automotive, biopolymers, caps & closures, and injection molding applications.
• Atmer™ 129 has a shelf life of 730 days.

Atmer™ 7325 by Cargill acts as an anti-static agent. It is 30% concentrate of combination of additives in a universal polyolefin carrier. Using a concentrate allows for better dispersion and overcomes complications encountered when using additives in their normal physical forms.

• It allows the additives to migrate to the surface of the polymer where they interact with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.
• It provides effective dosing of additives, better distribution of additives in base polymer, reduction of fuming/ smoking in processing.
• Recommended dosage level is 0.5-1% in injection molding and sheet extrusion.
• It is suitable for PE and PP applications.
• It has a shelf life of 730 days.

Ionphase™ U5 by Cargill is a halogen-free, non-migrating, polymeric, permanent anti-static agent. It offers reduced charge decay time and improved non-charging properties. It is used to control static electricity in plastics. It does not depend on humidity and is a ready-to-use polymer additive that lowers surface resistivity.

• It is designed to be used with colorable and translucent polypropylene injection molding, compounding and extrusion applications.
• It is used in electronics packaging, household appliances and automotive parts.
• It forms an interpenetrated network within the host polymer reducing the resistivity of the blend.
• It is suitable for PLA and PBS applications.
• Ionphase™ U5 has a shelf life of 730 days.

Atmer™ 190 by Cargill is an internal and external anti-static agent. It is recommended for transparent & non-transparent PLA & PLA blends, and for non-transparent applications in HIPS, ABS, and rigid PVC. When dispersed into the polymer, it migrates to the surface where it interacts with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge over a long period of time.

• Atmer™ 190 is used in automotive, biopolymers, film production and injection molding applications.
• It offers excellent thermal stability.
• The recommended dosage level is 3% for PLA, <3% for PLA blends and 1-3% for styrenics & rigid PVC.
• It has a shelf life of 730 days.

Ionphase™ U1 by Cargill is a halogen-free, non-migrating, permanent anti-static agent. It does not depend on humidity and is ready-to-use polymer additive that lowers surface resistivity. It offers control & safety for static electricity caused issues, improved non-charging properties, and reduced charge decay time.

• It is used to control static electricity in plastics.
• It is suitable for compounding, injection molding and extrusion applications with PC blends.
• It forms an interpenetrated network within the host polymer reducing the resistivity of the blend.
• It is used in electrostatic discharge (ESD) protection for covers & housings in electronics as well as dust prevention in automotive interior parts & consumer appliances.
• Ionphase™ U1 is recommended for PC-blends, PBT, PMMA, TR-ABS, TPU and SEBS applications.
• It has a shelf life of 730 days.

Atmer™ 7105 by Cargill acts as an antistatic agent. It is 50% concentrate of combination of additives in polyethylene. It allows for better dispersion and overcomes complications encountered when using additives in their normal physical forms. It contains an ethoxylated amine that is used in films thicker than 30µm.

• It allows the additives to migrate to the surface of the polymer where they interact with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.
• It offers effective dosing & better distribution of additives in base polymer, reduced fuming and smoking in processing.
• Recommended dosage level is 0.2-1% in injection molding and sheet extrusion.
• Atmer™ 7105 is listed with EINECS, DSL, IECSC, ENCS, TSCA, AICS and PICCS inventories
• It has a shelf life of 730 days.

Ionphase™ rSTAT2 by Cargill is a halogen-free, UV stabilized, permanent, polymeric anti-static agent. It is non-migrating, not humidity dependent and provides low surface resistivity & stability against weathering. It offers control & safety for static electricity caused issues, improved non-charging properties and reduced charge decay time.

• It forms an interpenetrated network within the host polymer reducing the resistivity of the blend.
• It is used in rigid intermediate bulk containers (RIBC), drums, and canisters.
• It is used to control static electricity in plastics.
• Ionphase™ rSTAT2 is designed to be used with polyethylene (HDPE) in extrusion blow molding applications.
• It is also suitable for injection molding applications.
• It has shelf life of 730 days.

Atmer™ 1013 NV by Cargill is an internal anti-static additive and processing aid. It can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it interacts with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.

• It gives uniform cell size distribution in expanded polyethylene.
• It offers reduced dust contamination & handling problems and improved demolding.
• It is suitable for polyolefins (PE, PP), flexible PVC and ethylene vinylacetate (EVA).
• Atmer™ 1013 NV is used in caps & closures, film applications.
• The recommended dosage level is 0.2-0.6% in injection molding and 1.2-1.5% in EPE applications.
• It has a shelf life of 1 year.

Ionphase™ fSTAT2 by Cargill is a permanent and non-migrating polymeric anti-static agent. It is designed for general extrusion applications with high melt flow polyolefins (PP, LDPE, LLDPE and mLLDPE) and injection molding of SEBS. Used in stretch films and shoe soles. It is a cost-effective solution in multilayer designs and can be used in high temperature processes.

• It is color stable at high processing temperatures.
• It offers good film transparency and improved sealing strength compared to other permanent solutions.
• It is humidity independent and provides effective performance, even in thin surface layers.
• It exhibits low surface resistivity, improved non-charging properties & reduced charge decay time.
• Ionphase™ fSTAT2 is suitable for electrostatic discharge (ESD) protected films & bags, FIBC & octabin liners, protective films, thermoformed sheets and electronic packaging.
• It has a shelf life of 730 days.