Return to supplier page
Ferric oxide hydrate reacted with aluminum oxide (Fe2O3•H2O•Al2O3) and micronized for ease of dispersion. MAPICO™ Yellow 1000-HRA by Venator Materials is a permanent, non-bleeding inert pigment with a very clean shade, and bright masstone color and strong & clean tint designed for LDPE and LLDPE plastic concentrate and compounding applications. Possesses extended heat stability. Improves extruder screen life and increases ultraviolet resistance of the thermoplastic. Exhibits color stability in processing temperatures below 245°C (475°F). Meets or exceeds ASTM C979-82 standards for color pigments used in cement. MAPICO™ Yellow 1000-HRA by Venator Materials is recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. Suggested for rubber and plastics applications. Ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastic applications. Is a permanent, non-bleeding inert pigment with a clean shade and good heat resistance that can be dispersed in plastics, and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Exhibits color stability in processing temperatures below 175°C (350°F). Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. Suggested for rubber and plastics applications. A very fine, high-purity synthetic magnetite (Fe<sub>3</sub>O<sub>4</sub>) produced by precipitation to a cubical shape. Is a high-tinting strength, permanent, non-bleeding and inert black pigment characterized by a blue tint. Replaces carbon blacks in formulations where floating or flooding is a problem. Meets ASTM C979-82 standards and therefore is suitable to color products made with cement. Recommended, owing to its sufficient high-purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation and resistance against alkali, chemical and weather. Used in rubbers and plastics applications. MAPICO™ Yellow 1000 by Venator Materials is Ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastics applications. Is a permanent, non-bleeding inert pigment with a very clean shade, and good heat resistance that can be dispersed in plastics and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Exhibits color stability in processing temperatures below 175°C (350°F). Meets or exceeds ASTM C979-82 standards for color pigments used in cement. Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). MAPICO™ Yellow 1000 offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. Suggested for rubber and plastics applications. MAPICO™ Yellow 1075A by Venator Materials is ferric oxide hydrate (FeOOH) manufactured in the martin process and micronized for ease of dispersion in plastics systems. Is a permanent, non-bleeding inert pigment with a clean shade and low oil absorption and good heat resistance that disperses easily on high-speed equipment in plastics. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Exhibits color stability in processing temperatures below 175°C (350°F). Meets or exceeds ASTM C979-82 standards for color pigments used in cement. Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. MAPICO™ Yellow 1075A is suggested for rubber and plastics applications. MAPICO™ Yellow 2100 by Venator Materials is ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastic applications. Is a permanent, non-bleeding inert pigment with a clean shade and good heat resistance that can be dispersed in plastics, and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Meets or exceeds ASTM C979-82 standards for color pigments used in cement. Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. MAPICO™ Yellow 2100 is suggested for rubber and plastics applications. MAPICO™ Black EC (848) by Venator Materials is a very fine, high-purity synthetic magnetite (Fe<sub>3</sub>O<sub>4</sub>) produced by alkaline precipitation of specially selected raw materials. Recommended, owing to its sufficient high-purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Complies with European Commission Directive 2008/128/EC section E172 for iron oxides and hydroxides. Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation and resistance against alkali, chemical and weather. MAPICO™ Black EC (848) is used in rubbers and plastics applications. MAPICO™ Yellow 1100 by Venator Materials is Ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastic applications. Is a permanent, non-bleeding inert pigment with a clean shade and good heat resistance that can be dispersed in plastics, and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Exhibits color stability in processing temperatures below 175°C (350°F). Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. Suggested for rubber and plastics applications. MAPICO™ Yellow 1050 by Venator Materials is ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastics applications. Is a permanent, non-bleeding inert pigment with a very clean shade, and good heat resistance that can be dispersed in plastics and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Exhibits color stability in processing temperatures below 175°C (350°F). Meets or exceeds ASTM C979-82 standards for color pigments used in cement. Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. MAPICO™ Yellow 1050 is suggested for rubber and plastics applications. Ferric oxide hydrate (FeOOH) manufactured in the martin process that is suitable for use in plastic applications. Is a permanent, non-bleeding inert pigment with a clean shade and good heat resistance that can be dispersed in plastics, and other applications. Used alone and in combination with organic pigments to improve opacity, reduce formula cost and add UV resistance. Meets or exceeds ASTM C979-82 standards for color pigments used in cement. Recommended, owing to its sufficient purity, to be used as a colorant in cosmetic, animal and pet food applications and in packaging or articles that come in contact with food (21CFR). Offers reliability and consistent quality, stability under exposure to sunlight and UV radiation, and alkali, chemical and weather resistancy. Suggested for rubber and plastics applications.
MAPICO™
Polymer additives supplied by Venator Materials