Return to supplier page
Ferrofoam C-850 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent. It contains 100% of the active substance. Ferrofoam C-850 is compatible with HDPE, LDPE, PP, PS, ABS for extrusion (chemical foaming) and LDPE, PP, PS for direct gassing. For optimum gas yield, a processing temperature between 190°C and 250°C is recommended. The dosage rate is 0.5-1.0%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam C-114 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent. Ferrofoam C-114 contains 100% of the active substance. The dosage rate is 0.5-1.0%. The raw materials used correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam C-129 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent and a nucleating agent as well. It contains 100% of the active substance. Compatible with LDPE, HDPE, PP, PVC for extrusion (chemical foaming) and LDPE, HDPE, PP, TPE, TPU for injection and blow molding. For optimum gas yield, a processing temperature between 180°C and 250°C is recommended. The dosage rate is 0.5-1.0%. Ferrofoam C-129 raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam PE-C20 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent and a nucleating agent as well. It contains 20% of the active substance. Compatible with LDPE, HDPE for extrusion (chemical foaming) and LDPE, HDPE, TPE, TPU for injection and blow molding. For optimum gas yield, a processing temperature between 180°C and 250°C is recommended. The dosage rate is 1.0-3.0%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam PS-CF20 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent. Ferrofoam PS-CF20 contains 20% of the active substance. The dosage rate is 1-3%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam PE CF-40 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent. Compatible with HDPE, LDPE, PP for extrusion (chemical foaming); LDPE, PS for direct gassing and HDPE, LDPE, PP, PS, ABS, SAN, ASA, ABS/PC blend for injection and blow molding. For optimum gas yield, a processing temperature between 190°C and 250°C is recommended. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam PS CF-40 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent. It contains 40% of the active substance. Compatible with PS for extrusion (chemical foaming) as well as direct gassing and PS, ABS, SAN, ASA for injection and blow molding. For optimum gas yield, a processing temperature between 190°C and 250°C is recommended. The dosage rate is 0.5-1.5%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations. Ferrofoam PE-C40 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent and a nucleating agent as well. It contains 40% of the active substance. Ferrofoam PE-C40 is compatible with LDPE, HDPE for extrusion (chemical foaming) and LDPE, HDPE, TPE, TPU for injection and blow molding. For optimum gas yield, a processing temperature between 180°C and 250°C is recommended. The dosage rate is 0.5-1.5%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations.
Ferrofoam
Polymer additives supplied by Ferro-Plast
8 Products match your search
Ferrofoam C-850
by Ferro-Plast
Ferrofoam C-114
by Ferro-Plast
- Sustainable option
Ferrofoam C-129
by Ferro-Plast
- Sustainable option
Ferrofoam PE-C20
by Ferro-Plast
- Sustainable option
Ferrofoam PS-CF20
by Ferro-Plast
- Sustainable option
Ferrofoam PE CF-40
by Ferro-Plast
- Sustainable option
Ferrofoam PS CF-40
by Ferro-Plast
- Sustainable option
Ferrofoam PE-C40
by Ferro-Plast
- Sustainable option
Showper page