Ferrofoam PE-C40 by Ferro-Plast is an endothermic multicomponent system, based on sodium bicarbonate and citric acid derivatives. Acts as a foaming agent and a nucleating agent as well. It contains 40% of the active substance. Ferrofoam PE-C40 is compatible with LDPE, HDPE for extrusion (chemical foaming) and LDPE, HDPE, TPE, TPU for injection and blow molding. For optimum gas yield, a processing temperature between 180°C and 250°C is recommended. The dosage rate is 0.5-1.5%. The raw materials used, correspond to the recommendations of the German BgW and the FDA regulations.
Product Type:
| Bio Based content | Visible After Login |
| CI Name | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
Ferrofoam PE-C40 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Decomposition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
