Return to supplier page
ELASTOSIL® eco LR 5003/60 A/B by Wacker is a non-post cure liquid silicone rubber (LSR). It is additionally post-cured to achieve greater strength. It enables cost-efficient and high volume production. It is designed for lifestyle products, drinking straws, baking tins, dough scrapers and other items. <br>
<ul style="padding-left: 40px;"><li>ELASTOSIL® eco LR 5003/60 A/B is suitable for processing by injection molding. </li>
<li>It is easily pigment-able two-component grade with very low volatile content. </li>
<li>It is produced in a resource-efficient manner and stem from plant-based methanol derived from non-fossil sources. </li>
<li>It is recommended for food, dairy, molded parts and household applications. </li>
<li>It meets the requirements of BfR and US FDA 21 CFR 177.2600.</li></ul> ELASTOSIL® N 9189 by Wacker is a non-slump, fully vulcanized, moisture curing, one-part silicone rubber. It is electrically conductive, heat resistant, non-slumping, self-adhesive, shear thinning and uses tin-free catalysis. It exhibits medium hardness shore A and excellent adhesion to many substrates. It cures at room temperature upon exposure to atmospheric humidity and only alcohol is released during curing. It is a non-sag compound that becomes free flowing under shear force. It is used for sealing and bonding applications. It provides long-term stability against weathering, moisture and UV radiation. It is commonly used in the engineering sector and does not require specially pretreated surfaces. ELASTOSIL® N 9189 has applications in the electrical, appliances, automotive, electronics and railway industries. ELASTOSIL® N 2076 by Wacker is a flowable, moisture curing, one-part silicone rubber. It is used for coating and encapsulation applications. It exhibits good heat resistance, self-leveling and excellent flame retardant properties. It also exhibits medium hardness and viscosity level. It has high limiting oxygen Index (LOI). It shows long-term stability against weathering, moisture and UV radiation. It is designed for the protective coating of electrical coils. It only releases alcohol during curing. It provides condensation curing that is electrically insulating and resistant to UV and weathering. It is used as a general-purpose coating, particularly for fire-resistant applications such as electrical coils of small transformers or chokes and for encapsulating electrical devices. ELASTOSIL® N 2076 has applications typically in electrical and railway industries. ELASTOSIL® RT 773 by Wacker is a non slump, thixotropic two-part condensation curing silicone rubber. It offers medium to fast-curing, compressibility, low density, primerless adhesion to many substrates (glass, ceramics, metals, plastics and powder coatings) and medium hardness. It is a general purpose grade. It is recommended for appliances, automotive and electrical industry. ELASTOSIL® RT 773 can be processed by vulcanization. It provides long-term stability, weatherability and resistance against UV radiation. ELASTOSIL® LR 3003/80 US A/B by Wacker is a two-component liquid silicone rubber (LSR). It is paste-like and easily-pigmentable with high transparency.<br>
<ul style="padding-left: 40px;"><li> Exhibits excellent mechanical and electrical properties.</li>
<li> It also offers good mechanical strength.</li>
<li> It is suitable for processing by injection molding.</li>
<li> Exhibits ability to be molded into intricately shaped or precision parts.</li>
<li> Offers excellent clarity, molding qualities and pot life after mixing parts A & B.</li>
<li> It contains ingredient which are suitable for food contact.</li>
<li> It is suitable for health care applications including short-term
implants.</li>
<li> It can be used in very brief molding cycles for intricately shaped and flash-free parts.</li>
<li> ELASTOSIL® LR 3003/80 US A/B is recommended for medical devices, needle-free IV valves, drink values, diaphragms, soft touch handles & buttons and organic rubber replacement.</li>
<li> It is tested according to recommendations of US Pharmacopoeia and meets the requirements of Class VI.</li></ul> ELASTOSIL® LR 3003/30 US A/B by Wacker is a two-component liquid silicone rubber (LSR). It is paste-like and easily-pigmentable with high transparency.<br>
<ul style="padding-left: 40px;"><li>Exhibits excellent mechanical and electrical properties.</li>
<li>It also offers good mechanical strength.</li>
<li>It is suitable for processing by injection molding.</li>
<li>Exhibits ability to be molded into intricately shaped or precision parts.</li>
<li>Offers excellent clarity, molding qualities and pot life after mixing parts A & B.</li>
<li>It contains ingredient which are suitable for food contact.</li>
<li>It is suitable for health care applications including short-term implants.</li>
<li>It can be used in very brief molding cycles for intricately shaped and flash-free parts.</li>
<li>ELASTOSIL® LR 3003/30 US A/B is recommended for medical devices, needle-free IV valves, drink values, diaphragms, soft touch handles & buttons and organic rubber replacement.</li>
<li>It is tested according to recommendations of US Pharmacopoeia and meets the requirements of Class VI.</li></ul> ELASTOSIL® LR 3003/60 US A/B by Wacker is a two-component liquid silicone rubber (LSR). It is paste-like and easily-pigmentable with high transparency.<br>
<ul style="padding-left: 40px;"><li> Exhibits excellent mechanical and electrical properties.</li>
<li> It also offers good mechanical strength.</li>
<li> It is suitable for processing by injection molding.</li>
<li> Exhibits ability to be molded into intricately shaped or precision parts.</li>
<li> Offers excellent clarity, molding qualities and pot life after mixing parts A & B.</li>
<li> It contains ingredient which are suitable for food contact.</li>
<li> It is suitable for health care applications including short-term
implants.</li>
<li> It can be used in very brief molding cycles for intricately shaped and flash-free parts.</li>
<li> ELASTOSIL® LR 3003/60 US A/B is recommended for medical devices, needle-free IV valves, drink values, diaphragms, soft touch handles & buttons and organic rubber replacement.</li>
<li> It is tested according to recommendations of US Pharmacopoeia and meets the requirements of Class VI.</li></ul> ELASTOSIL® eco R 401/90 OH by Wacker is a high consistency silicone rubber (HCR). Exhibits good flexibility, high transparency and mechanical properties. It is easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.<br>
<ul style="padding-left: 40px;"><li>It replaces 100 % of the fossil-based raw materials to sustainably certified biomass.</li>
<li>It is a general-purpose grade suitable for producing molded, extruded or calendered articles like seals, gaskets, sheets, tubing and profiles.</li>
<li>ELASTOSIL® eco R 401/90 OH is recommended for food, dairy, molded parts, general automotive parts, profiles and tubing applications.</li>
<li>It meets the requirements of BfR and US FDA 21 CFR 177.2600.</li></ul> ELASTOSIL® LR 3088/30 US A/B by Wacker is a non-post cure liquid silicone rubber (LSR). It is paste-like, easily-pigmentable two-component compound. Exhibits very low volatile content and excellent mechanical properties.<br>
<ul style="padding-left: 40px;"><li> Offers high transparency, excellent electrical properties for high tear resistance.</li>
<li> It is suitable for processing by injection molding.</li>
<li> Provides cost effectiveness and productivity.</li>
<li> It replaces 100 % of the fossil-based raw materials to sustainably certified biomass.</li>
<li> ELASTOSIL® LR 3088/30 US A/B is recommended for food, dairy, molded parts, medical devices and sanitary applications.</li>
<li> It meets the requirements of BfR and US FDA 21 CFR 177.2600.</li></ul> ELASTOSIL® LR 3070/30 US A/B by Wacker is a primer less, self-bonding liquid silicone rubber (LSR). It can adhere to various plastic substrates such as Polyamide (PA), Polybutylene terephthalate (PBT) and metals.<br>
<ul style="padding-left: 40px;"><li> It is suitable for processing by injection molding.</li>
<li> It can be used for technical applications without post curing.</li>
<li> ELASTOSIL® LR 3070/30 US A/B has a shelf life of 6 months.</li></ul>
ELASTOSIL®
Plastics and elastomers supplied by Wacker
ELASTOSIL® by Wacker are silicone rubbers that cure at high temperature (HTV/LSR grades) or room temperature (RTV grades) with suitable reactants. They form a three-dimensional structure and transform the uncured compound in a plastic state into an elastomeric rubber.
Key benefits of ELASTOSIL® brand include:
- Flexible at low temperatures
- Resistant to heat and aging (UV radiation and ozone)
- Easy to process
- Good mechanical properties that remain unchanged over a wide temperature range
343 Products match your search
ELASTOSIL® eco LR 5003/60 A/B
by Wacker
- Recently launched
- Sustainable option
ELASTOSIL® N 9189
by Wacker
- Recently launched
ELASTOSIL® N 2076
by Wacker
- Recently launched
ELASTOSIL® RT 773
by Wacker
ELASTOSIL® LR 3003/80 US A/B
by Wacker
- Sustainable option
ELASTOSIL® LR 3003/30 US A/B
by Wacker
- Sustainable option
ELASTOSIL® LR 3003/60 US A/B
by Wacker
- Sustainable option
ELASTOSIL® eco R 401/90 OH
by Wacker
ELASTOSIL® LR 3088/30 US A/B
by Wacker
- Sustainable option