Return to supplier page
BIOPLAST® GF 106/02 by Biotec is completely new, plasticizer-free thermoplastic material. Therefore there are no deposits vapors or by softening during processing of BIOPLAST GF 106/02. It is potato starch based. The material is ideally suited for blown film extrusion, cast film extrusion, Pipe extrusion and injection molding of completely biodegradable products. The biodegradability and other functional properties enable Chen penetrate the processors into product areas that the traditional thermo- materials were previously inaccessible tables. The model used in BIOPLAST GF 106/02 Potato starch is not, as in the case of thermoplastic starch (TPS) is required, with Plasticizer added, but in the original, native state in the material is a- worked. It is therefore characterized by excellent processing maintenance and performance characteristics combined with excellent storage ability. For these granules are not produced by genetically modified organisms featured ingredients used (GMO free). BIOPLAST® GF 106/02 is resistant to oils, grease, gasoline and water. Has a soft touch. Can be colored with masterbatches. Used in short lived consumer products for fast-food disposable packaging, deep drawn products, injection molded products, products for horticulture, packaging, tubes, carrier bags and waste bags. BIOPLAST® GS 2189 by Biotec is a completely new type of soft- pacemaker-free thermoplastic material. It is produced from over 60% sustainable crop material. Therefore there are no deposits or vapors of plasticizer during processing of material is ideal for flat film extrusion, blown film extrusion and injection molding of completely biodegradable products. The full biological Scheme degradation and other functional properties enable the converter into Product ranges penetrate the traditional thermoplastic materials previously were inaccessible It is thermoformable, heat-sealable and RF-sealable. Can be colored with master batches. Has a similar stiffness with PS. BIOPLAST® GS 2189 is used in deep drawn products, injection molded products, products for horticulture and packaging. New, plasticizers free thermoplastic material. Therefore, there are no up or steam by softening during processing of BIOPLAST 200. The material is suitable for blown film, cast film extrusion, profile extrusion and injection molding of completely biodegradable products. In BIOPLAST 200 potato starch used is not, such as in thermoplastic starch (TPS) is required, treated with plasticizer, but in the original, native state incorporated into the material. The film made of BIOPLAST 200 is completely biodegradable, resistant to oil, grease, fuel and water. Has a soft touch and is colored with masterbatches. Used in carrier bags, garbage bags, perishable consumer goods for fast food disposable packaging, molding products, injection molded products, products for horticulture, packaging and tubes. BIOPLAST 900 is a plasticizer-free thermoplastic starch. It contains biologically sourced polymers and is GMO-free. Is suitable for injection molding and thermoforming applications. Exhibits molding properties similar to conventional plastics, such as PP and PS. Possesses high heat resistance, 100% biodegradability, organic recyclability and 69% bio-based content (with 51% Bio-based Carbon content). Products made of BIOPLAST 900 can withstand boiling temperatures without losing their shape, functionality and efficiency; even at high filling temperature the taste of liquids/food is not affected. Meets the cycle time of conventional plastics with a cycle time of 5 seconds for the coffee capsule application. Allows production of products which are applicable for hot filling, printable by flexographic and offset printing without pretreatment, sealable (hot, RF, ultra sonic) and can be colored with master-batches. Used in injection molded articles like cutlery, medical devices, clips, cups for hot and cold drinks, semi-finished products, thermoformed products like food trays and as a blend partner in combination with BIOPLAST GF 106/02. Complies with biodegradability according to EN 13432 and is fit for food contact applications. BIOPLAST® 105 by Biotec is a new kind of plasticizer cherfreien thermoplastic material. Therefore there are no deposits or damp- fe of plasticizer during processing of BIOPLAST 105th The material suit- net ideal for injection molding, cast film extrusion and Blasfolienextru- sion from fully bio-degradable products. The full biological waste- biodegradability and other functional properties enable the converter into Pro- product areas to advance to the traditional thermoplastic materials previously were inaccessible. It is completely biodegradable, resistant to oils, greases, gasoline and water. Has a strength between LDPE and PET. It is shrinkable, transparent and can be colored with masterbatches. Possesses a good water vapor barrier. It is produced from over 60% sustainable crop material. With all the attributes of our other grades, this resin offers greater transparency for those clearer products. BIOPLAST® 105 is used in short-lived consumer goods, film coating thickness of foam and fiber-cast shells, packaging, carrying bags, knot bags, shrink films, labels and seals, raschel as well as root networks. BIOPLAST 500 is a plasticizer-free thermoplastic starch. It contains natural potato starch and other biologically sourced polymers. Suitable for processing by blown film extrusion. It has an excellent shelf life, helps produce items that are completely biodegradable in an industrial or domestic composting environment. Is recyclable and can be incinerated. Films made with it are printable by flexographic and offset printing without pre-treatment, heat sealable, have a soft touch and can be colored with master batches. Films mainly consist of renewable raw material and can be drawn down to below 15 µm. Recommended for short life packaging, multi-use carrier and loop-handle bags, single-use bio-waste bags, bin liners and agricultural films. Contains 58% of renewable raw material and has a bio-based carbon share of 51% according to ASTM D6866. Certified and registered by Vinçotte according to EN 13432 with the ‘OK compost’ and ‘seedling’ logo. Completely new, plasticizer-free thermoplastic material. Allows the production of films with paper-like properties. As a result of plasticizer absence no material built-up or steam occurs during processing of BIOPLAST WRAP 100. The complete biodegradability and other functional properties of BIOPLAST WRAP 100 enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials or paper. The potato starch used for BIOPLAST WRAP 100 is native and not blended with plasticizer (which would be necessary for example to produce thermoplastic starch, TPS). BIOPLAST WRAP 100 therefore exhibits outstanding processing- and performance-characteristics as well as an excellent shelf life. Used in film and food packaging. Plasticizer-free thermoplastic material. It is derived from potato starch and is GMO-free. BIOPLAST 2149 is easy flowing
and therefore particularly suitable for processing by injection
molding to produce items that are completely biodegradable and recyclable. The material can also be converted by sheet and film extrusion. The absence of plasticizer allows the material to be easily processed to manufacture stable products of consistent quality. BIOPLAST 2149 has an excellent shelf life but will biodegrade readily in an industrial composting environment. The products made of BIOPLAST 2149 are printable by flexographic and offset printing without pretreatment as well as can be colored with masterbatches and are sealable (hot, RF, ultra sonic). It can be used for injection molded articles (e.g. cutlery, medical devices, clips, semi-finished products), thermoformed products (e.g. food trays)and blend partner in combination with other BIOPLAST materials (e.g. BIOPLAST GF 106/02). BIOPLAST® TPS by Biotec is a potato starch resin. Despite being greater than 85% starch, it can be extruded into gels, foams and even sheet. Has a very good permeability for water vapor and at the same time excellent barrier properties for oxygen as well as carbon dioxide. It is GMO-free. Can be processed solely as well as being blended with other polymers. Is manufactured of pure food ingredients and can be produced according to the hygienic requirements for food production. Due to its composition, it is edible, digestible, water soluble and completely biodegradable. BIOPLAST® TPS is used in foamed trays and bowls for fast food packaging, disposable packaging, hamburger boxes, foam moldings, water soluble form part and swallow moldings.
BIOPLAST®
Plastics and elastomers supplied by Biotec
9 Products match your search
BIOPLAST® GF 106/02
by Biotec
BIOPLAST® GS 2189
by Biotec
BIOPLAST® 200
by Biotec
BIOPLAST® 900
by Biotec
BIOPLAST® 105
by Biotec
BIOPLAST® 500
by Biotec
BIOPLAST® WRAP 100
by Biotec
BIOPLAST® 2149
by Biotec
BIOPLAST® TPS
by Biotec
- Sustainable option
Showper page