BIOPLAST® GF 106/02 by Biotec is completely new, plasticizer-free thermoplastic material. Therefore there are no deposits vapors or by softening during processing of BIOPLAST GF 106/02. It is potato starch based. The material is ideally suited for blown film extrusion, cast film extrusion, Pipe extrusion and injection molding of completely biodegradable products. The biodegradability and other functional properties enable Chen penetrate the processors into product areas that the traditional thermo- materials were previously inaccessible tables. The model used in BIOPLAST GF 106/02 Potato starch is not, as in the case of thermoplastic starch (TPS) is required, with Plasticizer added, but in the original, native state in the material is a- worked. It is therefore characterized by excellent processing maintenance and performance characteristics combined with excellent storage ability. For these granules are not produced by genetically modified organisms featured ingredients used (GMO free). BIOPLAST® GF 106/02 is resistant to oils, grease, gasoline and water. Has a soft touch. Can be colored with masterbatches. Used in short lived consumer products for fast-food disposable packaging, deep drawn products, injection molded products, products for horticulture, packaging, tubes, carrier bags and waste bags.
BIOPLAST® GS 2189 by Biotec is a completely new type of soft- pacemaker-free thermoplastic material. It is produced from over 60% sustainable crop material. Therefore there are no deposits or vapors of plasticizer during processing of material is ideal for flat film extrusion, blown film extrusion and injection molding of completely biodegradable products. The full biological Scheme degradation and other functional properties enable the converter into Product ranges penetrate the traditional thermoplastic materials previously were inaccessible It is thermoformable, heat-sealable and RF-sealable. Can be colored with master batches. Has a similar stiffness with PS. BIOPLAST® GS 2189 is used in deep drawn products, injection molded products, products for horticulture and packaging.
New, plasticizers free thermoplastic material. Therefore, there are no up or steam by softening during processing of BIOPLAST 200. The material is suitable for blown film, cast film extrusion, profile extrusion and injection molding of completely biodegradable products. In BIOPLAST 200 potato starch used is not, such as in thermoplastic starch (TPS) is required, treated with plasticizer, but in the original, native state incorporated into the material. The film made of BIOPLAST 200 is completely biodegradable, resistant to oil, grease, fuel and water. Has a soft touch and is colored with masterbatches. Used in carrier bags, garbage bags, perishable consumer goods for fast food disposable packaging, molding products, injection molded products, products for horticulture, packaging and tubes.
