Return to supplier page
BLUESIL™ PI 2074 by Elkem Silicones is a (tolylcumyl) iodonium tetrakis (pentafluorophenyl) borate. Acts as a cationic photoinitiator. It is compatible with epoxy resins, vinyl ethers or any other type of oligomer which polymerizes cationically. It is also suitable to the formulation of hybrid radical/ cationic systems. Recommended dosage level is <1%, combined with a photosensitizer, isopropyl thioxanthone type, for the formulation of inks, pigmented coatings or varnishes applied in thicknesses of greater than 10 microns. BLUESIL™ PI 2074 is used in fiber optics coatings. BLUESIL™ TCS 7534 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7534 A & 10 parts BLUESIL™ TCS Catalyst). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer, fast cure at elevated temperature, low viscosity, low thermal conductivity (high insulation properties) and long bath life at room temperature (more than 16 hours). Provides high tear strength and high comb stripping resistance. Is easily pumpable to sustain high coating speed and allows low coat weight. Suitable for textile coating applications, such as coating of airbag fabrics and technical fabrics for insulation, safety & protection. BLUESIL™ TCS 7534 A/B has a pot life of 16 hours. BLUESIL™ TCS 7757 A/B is a two-component heat curing liquid silicone elastomer dispersion (100 parts BLUESIL™ TCS 7757 A & 100 parts BLUESIL™ 7757 B). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer, good abrasion & scuff resistance, fast cure at elevated temperature and long bath life at room temperature (more than 8 hours). Provides high tear strength, smooth surface after curing and edge comb resistance. It is colorless when cured and is fit for high coating weight with relevant process. Suitable for Technical textile coatings, such as industrial and high performance fabrics & artificial leather. It has a pot life of minimum 8 hours. BLUESIL™ TCS 7550 A/B is a two-component heat curing liquid silicone elastomer dispersion (50 parts BLUESIL™ TCS 7550 A & 50 parts catalysts - BLUESIL™ 7550 B). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer on coated and uncoated fabrics, fast cure at elevated temperature, low thermal conductivity (high insulation properties) and long bath life at room temperature (more than 16 hours). Provides high tear strength and edge comb resistance. Suitable for industrial and high performance textile coatings. BLUESIL™ TCS 7550 A/B has a pot life of minimum 16 hours. BLUESIL™ TCS 7612 Base by Elkem Silicones is a part of a two-component polyaddition heat-cured, low viscosity screen printable silicone elastomer. It is well suited for blending with BLUESIL™ TCS 7664 Base as a viscosity modifier. It is easily customized with pigments and other fillers to provide a soft hand, thixotropy and high elongation properties. It shows low cure temperatures to prevent dye migration, fast cure at elevated temperatures, and long work time at room temperature. It exhibits heat resistance, excellent elasticity for printing on high stretch substrates, high bond strength without primer on textiles from different origins and durable finish-washable. It is an environmentally friendly (PVC-free) grade and uses solventless technology. BLUESIL™ TCS 7612 Base is specially engineered for textiles coating applications. It has a shelf life of 12 months. BLUESIL™ TCS 7774 A/B by Elkem Silicones is a two-component, heat-curing, liquid silicone elastomer. It is cured by a polyaddition reaction. It offers durability, high elasticity, colorless cure and quick cure with heat. It imparts excellent adhesion to multiple substrates. It is used in technical textile coatings, such as industrial & high-performance fabrics, artificial leather and elastic fabrics. It is also used as a bonding aid for folded seams or other bonded stretch fabrics. BLUESIL™ TCS 7774 A/B has a shelf life of 9 months. BLUESIL™ TCS 7513 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7513 A & 10 parts BLUESIL™ TCS 7513 B). Exhibits solventless technology, very low viscosity and high levels of penetration and encapsulation of the fibers. Provides curing by polyaddition reaction, high bond strength without primer and low add-on weights. Is easily pumpable and allows addition of fillers. It has a long bath life at room temperature >16h. BLUESIL™ TCS 7513 A/B can be processed through knife coating, transfer coating, dip-coating. Suitable for textile coating applications, ink matrices and impregnation on various substrates such as polyamide, polyester & glass fiber. BLUESIL™ ADD 10086 by Elkem Silicones is a polydimethylsiloxane gum in solvent solution. It is especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. Used in industrial coatings. The doses of use can be varied from 0.1 to 0.8 % according to the type of binder and the effect desired. BLUESIL™ TCS 7516 A/B by Elkem Silicones is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7516 A RED/WHT/BLUE & 100 parts BLUESIL™ TCS 7516 B). Exhibits high bond strength without primer, fast cure at elevated temperature, low viscosity and long bath life at room temperature (>6hours). Provides good balance high tear strength and high comb stripping resistance & good heating resistance. Is easily pumpable to sustain high coating speed and allows very low coat weight (<30g/cm<sup>2</sup>). Suitable for textile coating applications, such as coated airbags, industrial and high performance fabrics. BLUESIL™ TCS 7516 A/B has a pot life of 6 hours. BLUESIL™ TCS 7537 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7537 A & 10 parts catalysts - BLUESIL™ TCS 7537 B & TCS 7537 C). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer (on polyamide, polyester, aramids & glass fibers), fast cure at elevated temperature, low viscosity, excellent aging resistance and excellent adhesion over time on difficult substrates. Provides high tear strength and edge comb resistance. It is easily pumpable to sustain high coating speed and shows versatility in coat weights processing. Suitable for textile coating applications, such as coating of airbag fabrics, technical fabrics for insulation, safety & protection and unscored textiles. BLUESIL™ TCS 7537 A/B has a pot life of 16 hours.
Bluesil™
Coating ingredients supplied by Bluestar Silicones