Return to supplier page
Deoflow® AP by DOG Chemie acts as a dispersing agent. It is zinc and water-free and provides good dispersing ability to fillers. It also improves the flow and extrusion properties of rubber compounds without having a peptizing or activating effect on vulcanization. Deoflow® AP is recommended for rubber compounds that are sensitive to interference caused by the presence of water or zinc contained in the processing aids. The dosage rate is 2-6 phr. Deoflow D by DOG Chemie is a blend of fatty alcohols and fatty acid esters. Used as a dispersing agent. Deoflow D improves the flow and extrusion properties. Deoflow® Z by DOG Chemie is a calcium salts and derivatives of saturated fatty acids with inorganic carrier. Acts as a processing aid, dispersing agent and lubricant. It is water and zinc free. Improves the flow properties of the compounds and the release of the vulcanizates. Deoflow® Z is recommended for rubber compounds based on EPDM, NR, SBR and CR, in which zinc-containing processing additives could cause interferences and also for complex moldings. Optimum dispersing effect is obtained when added at the beginning of the mixing cycle or during warming up of the finished compounds. The dosage rate is 1-6 phr. Deoflow A by DOG Chemie acts as a dispersing agent. It is a blend of fatty alcohols and fatty acid esters combined with lubricant.<br>
<ul style="padding-left: 40px;"><li>It improves the flow and extrusion properties.</li>
<li>It is free from metal ions and suitable for elastomers containing halogens.</li>
<li>The dosage level for Deoflow A is 2-6 phr.</li></ul> Deoflow 821 by DOG Chemie acts as a lubricant, dispersing and mold release agent. It is zinc-free and effective against mill sticking. It imparts positive influence on flow and release in the injection molding process.<br>
<ul style="padding-left: 40px;"><li>Deoflow 821 exhibits higher temperature stability and low dropping point.</li>
<li>Mainly recommended for FKM (Fluoroelastomers), ACM (Alkyl acrylate copolymer), NBR (Nitrile Butadiene Rubber), CR (Chloroprene rubber) and H-NBR (Hydrogenated Acrylonitrile Butadiene Rubber).</li>
<li>Typical dosage rate is 1-3 phr.</li></ul> Mixture of fatty alcohols and fatty acid esters combined with lubricants. Acts as a dispersing agent. It is zinc-free. It provides good dispersing ability to fillers. Also improves the flow and extrusion properties of rubber compounds without having a peptizing or activating effect on vulcanization. Mainly recommended for rubber compounds that are sensitive to interference caused by the presence of water or zinc contained in the processing aids. The dosage rate is 2-6 phr. Calcium salt of saturated fatty acids and amide-esters. Acts as a zinc-free and water-free lubricant and dispersing agent. It provides improved filler dispersion, reduced compound viscosity and increased flow properties of the compound, without any significant influence on the vulcanisation characteristics. Deoflow S is added at the beginning of the mixing cycle to obtain optimum dispersion and less sticking. It can also be added at the end of the mixing cycle or during warming up of the finished compound to obtain the best release effect. Used mainly for molded products and rubber compounds which are sensitive to interference caused by the presence of water and zinc contained in the processing aids. Can also be used in various elastomers. Recommended to be used at dosage of 1-5 phr.
Deoflow®
Polymer additives supplied by DOG Chemie
7 Products match your search
Deoflow® AP
by DOG Chemie
Deoflow D
by DOG Chemie
Deoflow® Z
by DOG Chemie
Deoflow A
by DOG Chemie
Deoflow 821
by DOG Chemie
Deoflow® AM
by DOG Chemie
Deoflow® S
by DOG Chemie
Showper page