Deoflow 821 by DOG Chemie acts as a lubricant, dispersing and mold release agent. It is zinc-free and effective against mill sticking. It imparts positive influence on flow and release in the injection molding process.
- Deoflow 821 exhibits higher temperature stability and low dropping point.
- Mainly recommended for FKM (Fluoroelastomers), ACM (Alkyl acrylate copolymer), NBR (Nitrile Butadiene Rubber), CR (Chloroprene rubber) and H-NBR (Hydrogenated Acrylonitrile Butadiene Rubber).
- Typical dosage rate is 1-3 phr.
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
Deoflow 821 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Ash Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point, Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
