Supplier Page
KPAC
OverviewProducts160Brands4Products families3

KEPAMID® (Plastics and elastomers)

Supplied by KPAC

74 Products match your search

KEPAMID® 1350GFU NT

by KPAC

KEPAMID® 1350GFU NT by KPAC is 50% glass-fiber reinforced polyamide 6 (PA 6) grade. It offers good mechanical properties, heat- and UV resistance. It is suitable for processing by injection molding. It is used in automotive, electrical, electronics and industrial parts. KEPAMID® 1350GFU NT complies with UL 94 HB flame rating.
See the product

KEPAMID® 6145GHM8

by KPAC

KEPAMID® 6145GHM8 by KPAC is a semi-aromatic polyphthalamide (PPA) reinforced with 45% glass fiber and mineral. Possesses good dimensional stability, excellent mechanical strength & properties and good thermal property with very high Tm up to 310°C-325°C. Provides low moisture absorption than general nylons. Exhibits heat-, hot water-, wear-, creep and fatigue resistance. Is suitable for processing by injection molding. Recommended for automotive, electrical & electronics and consumer parts. KEPAMID® 6145GHM8 complies with UL 94 HB flame rating.
See the product

KEPAMID® 6130GHA

by KPAC

KEPAMID® 6130GHA by KPAC is a semi-aromatic polyphthalamide (PPA) reinforced with 30% glass fiber. Possesses exellent mechanical strength & properties and good thermal property with very high Tm up to 310°C-325°C. Provides low moisture absorption than general nylons. Exhibits heat-, hot water-, wear-, creep and fatigue resistance. Is suitable for processing by injection molding. Recommended for automotive, electrical & electronics and consumer parts. KEPAMID® 6130GHA complies with UL 94 HB flame rating.
See the product

KEPAMID® 6130GFH

by KPAC

KEPAMID® 6130GFH by KPAC is a semi-aromatic polyphthalamide (PPA) reinforced with 30% glass fiber. Possesses exellent mechanical strength & properties and good thermal property with very high Tm up to 310°C-325°C. Provides low moisture absorption than general nylons. Exhibits heat-, hot-water-, creep and fatigue resistance. Is suitable for processing by injection molding. Recommended for automotive, electrical & electronics and consumer parts. KEPAMID® 6130GFH complies with UL 94 HB flame rating.
See the product

KEPAMID® 6150GFH

by KPAC

KEPAMID® 6150GFH by KEP is a semi-aromatic polyphthalamide (PPA) reinforced with 50% glass fiber. Possesses exellent mechanical strength & properties and good thermal property with very high Tm up to 310°C-325°C. Provides low moisture absorption than general nylons. Exhibits heat-, hot-water-, creep and fatigue resistance. Is suitable for processing by injection molding. Recommended for automotive, electrical & electronics and consumer parts. KEPAMID® 6150GFH complies with UL 94 HB flame rating.
See the product

KEPAMID® 2300SA

by KPAC

KEPAMID® 2300SA by KPAC is an impact modified nylon 66 grade. It is polymerized hexamethylene diamine and adipic acid and has an amide bond (NHCO) of polyamide. It is suitable for general processing.<br> <ul style="padding-left: 40px;"><li>Exhibits good mechanical properties, along with strong thermal stability and long-term heat resistance ranging from 80 to 140°C.</li> <li>Offers impressive chemical and oil resistance and has a relatively high rate of moisture absorption.</li> <li>KEPAMID® 2300SA is applicable for home appliances, automobiles and IT sector.</li>
See the product

KEPAMID® 2300SFU

by KPAC

KEPAMID® 2300SFU by KPAC is an impact modified PA 66 grade. It is polymerized hexamethylene diamine and adipic acid and has an amide bond (NHCO) of polyamide. It is suitable for high impact processing.<br> <ul style="padding-left: 40px;"><li>Exhibits good heat resistance, high toughness and UV resistance.</li> <li>Offers impressive chemical and oil resistance and has a relatively high rate of moisture absorption.</li> <li>KEPAMID® 2300SFU is suitable for applications such as automotive, electrical & electronics and industrial parts.</li>
See the product

KEPAMID® 2330GFA

by KPAC

KEPAMID® 2330GFA by KPAC is a polyamide 66 (PA 66) grade reinforced with 30% glass fibers. Offers thermal properties with long term heat resistance between 80°C and 140°C. Provides strong mechanical properties, impact strength, easy processability and high stiffness. Exhibits relatively high moisture absorption rate, self-extinguishing characteristics, chemical- and oil resistance. Shows good resistance to friction and wear. KEPAMID® 2330GFA is suitable for processing by injection molding. Used in automotive, inner bush, electrical & electronics and industrial parts. It is a RoHS-compliant grade.
  • Sustainable option
See the product

KEPAMID® 2333GFH

by KPAC

KEPAMID® 2333GFH by KPAC is a thermal-stabilized polyamide 66 (PA 66) grade reinforced with 33% glass fiber. It has high stiffness and long-term heat stability at high temperatures. It is suitable for processing by injection molding. Used in automotive, electrical & electronics and industrial parts. KEPAMID® 2333GFH complies with UL 94 HB flame rating.
  • Sustainable option
See the product

KEPAMID® 1915CFS

by KPAC

KEPAMID® 1915CFS by KPAC is 15% carbon fiber reinforced, conductive polyamide 6 (PA 6) grade. It offers good mechanical properties, electrical properties, heat- and wear resistance. It is suitable for processing by injection molding. It is used in automotive, electrical, electronics and industrial parts requiring high stiffness, heat resistance, and conductivity. KEPAMID® 1915CFS complies with UL 94 HB flame rating.
See the product
Showper page

Most Popular Brands

KEPAMID®

by KPAC

74 products
See All Products

KEPITAL®

by KPAC

61 products
See All Products

KEPEX®

by KPAC

20 products
See All Products

MAXIMID®

by KPAC

5 products
See All Products