4205G-6 by Idemitsu Fine Composites is a talc reinforced, polyolefin based composite grade. Exhibits high rigidity, good thermal and dimensional stability. Offers good heat-, weathering- and chemical resistance. Is suitable for processing by injection molding. Possible applications could be refrigerator trays, rice cooker steam ports, dish washing & drying machines, microwave oven ferrite covers, lighting parts and domestic garbage disposal machine parts. Can also be used in air conditioner outdoor units, humidifier housings and stove parts. Other applications of 4205G-6 may include automobile interior & exterior parts, engine room parts, power generator covers, automatic vending machine canisters, fans, oil filling pumps, razor handles and inter-dental brushes.
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
4205G-6 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Nominal Strain at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |