Plastics and elastomers for Electrical

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

Supreme 112 by Master Bond is an exceptionally low viscosity epoxy (EP) system for bonding, sealing, potting, encapsulation and impregnation. It requires elevated temperature curing. It offers exceptionally long open time, high glass transition temperature, toughness and slightly less rigidity.

• It bonds to a wide variety of substrates including metals, composites, glass, and many rubbers and plastics.
• It adheres especially well to glass, fibers and ceramics.
• It can withstand thermal cycling and mechanical stresses.
• It has strong & sturdy physical strength profile particularly tensile strength and retains electrical insulation profile even in harsh conditions.
• It shows good resistance to chemicals including water, oils, fuels, acids and bases.
• It is especially useful as it pertains to epoxy, composites and other fiber reinforced structures commonly used in pipes, storage tanks, aircraft as well as electronic devices.
• It can be used in numerous electrical applications such as transformers, switchgear components, resistors and many other electrical devices.
• It has a shelf life of 1 year in cans and 6 months in syringes.
• Supreme 112 is RoHS complaint and passes NASA low outgassing.

MasterSil 151Med by Master Bond is a two component, low viscosity, biocompatible silicone compound for high performance potting and encapsulation. It is an addition cured system and does not require exposure to air for complete cross-linking. It has a convenient ten to one mix ratio by weight, contains no solvents and will not outgas while curing.

• It offers flexibility, high temperature & water resistance and superb electrical insulation properties.
• It readily cures at ambient temperatures or faster cure at elevated temperatures and can cure in thicknesses beyond 1 inch.
• It exhibits very low shrinkage upon cure, low exotherm, very long pot life, excellent optical clarity and transmission properties.
• It withstands severe thermal cycling and resists vibration, shock, gamma radiation, ETO & various chemical sterilants.
• It can be used for encapsulating electronic circuitry, electrical components, LEDs, optical fibers and other optical components in a wide array of medical devices.
• It has a shelf life of 6 months at 75°F, in original unopened containers.
• MasterSil 151Med is RoHS complaint, passes ISO 10993-5 for cytotoxicity and meets USP Class VI specifications.

EP21TDCHT by Master Bond is a versatile, high performance, two component epoxy (EP) for bonding, sealing and coating. It exhibits moderate viscosity, good dimensional stability, easy application, good flow along with convenient curing schedule and user friendliness.

• It offers superior toughness, superb strength profile and resistance to rigorous thermal cycling, vibration, shock.
• It shows superior electrical insulation, good chemical resistance against water, fuels and oils.
• It provides good adhesion with similar and dissimilar substrates with minimum shrinkage to metals, composites, glass, ceramics, plastics & rubbers
• It is used in aerospace, electrical, electronic, medical and specialty OEM.
• It has a shelf life of 6 months in syringes and 1 year in cans.
• EP21TDCHT is RoHS complaint and meets MIL-STD-883J Section 3.5.2 for thermal stability.

EP30DP-NV by Master Bond is a versatile two component epoxy (EP) system for bonding, sealing, coating & encapsulation applications. It offers superior toughness, abrasion resistance, low viscosity and excellent electrical insulation. It is 100% reactive which does not contain any solvents or diluents.

• Its rigidity is modified by the addition of a urethane based flexibilizer and it confers a lower shore D hardness to the cross linked entity.
• It exhibits higher elongation, long working life, low exotherm, and is cryogenically serviceable.
• It withstands rigorous thermal cycling, shock and mechanically induced vibrations.
• It bonds well to a wide variety of substrates including metals, ceramics, composites, glass and many plastics.
• It cures readily at ambient temperatures or more rapidly at elevated temperatures.
• It is used in electronics, aerospace, optical, specialty OEM and other applications.
• It has a shelf life of 6 months at 75°F in original, unopened containers.
• EP30DP-NV is RoHS complaint.

EP21ARHT by Master Bond is a 100% reactive, two-component high performance epoxy (EP) resin system for high performance bonding, sealing, coating and encapsulating applications. It does not contain any solvents or diluents. It exhibits high bonding strength to both similar & dissimilar substrates.

• It offers very low linear shrinkage upon cure, outstanding physical properties and electrical insulation.
• It is formulated to cure at ambient temperatures or more quickly at elevated temperatures.
• It shows outstanding chemical (acids) resistance and adhesion to a wide variety of substrates including metals, glass, ceramics, many rubbers and plastics.
• It is used in coating tanks & other vessels that may contain acids, aerospace, electronic, electrical and chemical processing applications.
• It has a shelf life of 6 months in syringes and 1 year in cans.
• EP21ARHT is RoHS complaint.

EP17HTDA-2 by Master Bond is a thermally conductive, electrically insulative, one component heat cured epoxy (EP) system with high compressive strength. It is suitable for sealing and die attach applications.

• It is not premixed & frozen, bonds well to a wide variety of substrates such as metal, ceramics, plastics and composites.
• It offers high glass transition temperature (Tg) and high chemical resistance to water, acids, bases, solvents, fuels, and oils.
• It can withstand temperatures used in electronic packaging such as wire bonding.
• It has a shelf life of 3 to 6 months at 40-50°F in original syringes.
• EP17HTDA-2 is RoHS complaint and passes NASA low outgassing specifications.

EP3HT by Master Bond is one component epoxy (EP) system for bonding, sealing, coating applications. It provides easy processing with excellent physical and bonding strength properties. It is 100% reactive and does not contain any diluents or solvents.

• It offers easy application, fast curing with versatile cure schedules and good adhesion to a wide variety of substrates including glass, metals, ceramics and most plastics.
• It exhibits high shear strength properties, good electrical insulation and superior chemical resistance to water, oils, fuels and many acids and bases.
• It has unlimited working life at room temperature.
• It is used in aerospace, electronics, electrical and OEM industries.
• It has a shelf life of 6 months at 75°F.
• EP3HT is RoHS complaint.

EP21TP-2NV by Master Bond is a versatile two component epoxy (EP) polysulfide system formulated to cure at room temperature with easy mixing forgiving 1:1 mix ratio. It is suitable for bonding, sealing, coating, encapsulating applications. It offers good hardness, elongation and superior electrical insulation.

• It provides resistance to chemicals including water, gasoline, fuels, oils, hydrocarbons, hydraulic fluids and many acids and bases.
• It exhibits excellent toughness to withstand rigorous thermal cycling as well as mechanical and thermal shocks.
• It creates tough and flexible bonds with metals, glass, ceramics, many rubber and plastic materials.
• ,It is used in fuel tank sealants, potting compounds for electrical connectors, aerospace, electronic, electrical, and specialty OEM.
• It has a shelf life of 1 year.
• EP21TP-2NV is RoHS complaint.

EP21TPHT by Master Bond is a two component epoxy polysulfide system for bonding, sealing, coating and encapsulating applications. It offers good hardness, elongation, flexibilty, superior electrical insulation with easy processing. It is brushable, easy to apply and has low shrinkage upon curing.

• It provides resistance to chemicals like water, gasoline, fuels, oils, hydrocarbons, hydraulic fluids & lubricants.
• It exhibits excellent toughness to withstand rigorous thermal cycling as well as mechanical and thermal shocks.
• It bonds well with to a variety of substrates, including metals, glass, ceramics, many rubber and plastics.
• It is used in aerospace, electronic, electrical and specialty OEM applications.
• It has a shelf life of 6 months in syringes and 1 year in cans at 75°F.
• EP21TPHT is RoHS complaint.