DUROFTAL®

Coating ingredients supplied by allnex

15 Products match your search

DUROFTAL® PE 7171/70SNABG

by allnex

DUROFTAL® PE 7171/70SNABG by allnex is a low molecular, linear saturated polyester resin. It possesses high solids content and offers a high yield and good flexibility/hardness balance. It is suitable for architectural coil-coating topcoats.<br> <ul style="padding-left: 40px;"><li>It is recommended to combine with HMMM resins (e.g. Cymel 303 LF) in ratios of 80-90% polyester & 20-10% melamine resin (calculated on solid binders).</li> <li>The addition of blocked acidic catalysts such as CYCAT® VXK 6395 in concentrations of 2-6% (on active substance) calculated on solid melamine resin is recommended to optimize the curing process and the chemical resistance.</li> <li>DUROFTAL® PE 7171/70SNABG has a shelf life of 365 days.</li></ul>

Support available
Original documents

See the product

DUROFTAL® PE 7170/65SNBBG

by allnex

DUROFTAL® PE 7170/65SNBBG by allnex is a low molecular weight, linear saturated polyester resin. It is used in highly durable and UV-resistant topcoats for high-quality coil coating systems for outdoor architecture & domestic appliances.<br> <ul style="padding-left: 40px;"><li>It is also used in high-quality baking enamels for general industry.</li> <li>Coatings based on DUROFTAL® PE 7170/65SNBBG exhibit superior outdoor durability.</li> <li>As compared to DUROFTAL® PE 7171 and DUROFTAL® VPE 6128, it offers significantly better flexibility.</li> <li>It has a shelf life of 365 days.</li></ul>

Support available
Original documents

See the product

DUROFTAL® PE 912/60SNA

by allnex

DUROFTAL® PE 912/60SNA by allnex is an oil-free polyester for the use in solvent-borne base- and top-coats. It is best used in baking coatings in combination with melamine resins for curing. The cured film shows very good mechanical properties and adhesion to metal. For base-coats, especially metallic, the combination with acetobutyrate is recommended for DUROFTAL® PE 912/60SNA. It has a shelf life of 730 days.

Support available
Original documents

See the product

DUROFTAL® VPE 6128/70SNABG

by allnex

DUROFTAL® VPE 6128/70SNABG by allnex is a linear, oil free, saturated polyester resin used for coil coating topcoats and high performance industrial stoving enamels. DUROFTAL® VPE 6128/70SNABG shows excellent properties under various curing conditions. Because of its high solid content, it is possible to formulate coatings with an extremely high yield, good gloss, adhesion and excellent flexibility.

Support available
Original documents

See the product

DUROFTAL® PE 7189/60SNAMPAC

by allnex

DUROFTAL® PE 7189/60SNAMPAC by allnex is a linear, oil-free polyester resin. It shows excellent properties under various curing conditions. Coatings based on this product displays excellent adhesion on different metals including aluminum, steel and HDG steel. The final coatings have good anti-corrosion properties and good balance between hardness & flexibility. It is usually crosslinked with HMMM-type resins in ratios of 80-90% polyester and 20-10% melamine resin (calculated on solid binder). The addition of blocked acidic catalysts such as CYCAT® VXK 6395 in concentrations of 2-8% (active p-TSA) calculated on solid melamine resin is recommended to optimize the curing process and the chemical resistance. DUROFTAL® PE 7189/60SNAMPAC is used in coil (rolled metal) coating primers and backcoats. The shelf of this product is 365 days.

Support available
Original documents

See the product

DUROFTAL® AQ-803

by allnex

DUROFTAL® AQ-803 by allnex is an oil-free polyester resin diluted in R-9 solvent. It offers high brightness, excellent flexibility, optimal grip and initial color retention. It shows partial compatibility with amine resins and provides great adherence, high hardness and chemical resistance. Recommended for primers, enamels, varnishes, top coats, base-, automotive- and coil coatings. DUROFTAL® AQ-803 has a shelf life of 24 months.

Support available
Original documents

See the product

DUROFTAL® VPI 2803/78BAC

by allnex

DUROFTAL® VPI 2803/78BAC by allnex is a hydroxy functional polyester and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, pre-eminently with Desmodur® N 3300 (Bayer), it produces high quality, ultra high solids, two pack clear-coats and pigmented topcoats for the automotive refinish and industrial lacquer sectors. Films cured with DUROFTAL® VPI 2803/78BAC provides high hardness, high gloss and depth of image. They also offer superior weathering stability, excellent solvent- and chemical- resistance.

Support available
Original documents

See the product

DUROFTAL® FC 2828/75BAC

by allnex

DUROFTAL® FC 2828/75BAC by allnex is hydroxy-functional polyester. It is used in combination with aliphatic polyisocyanates. Coatings based on this product are characterized by high hardness and gloss, very good chemical- & solvent resistance and excellent outdoor durability. It shows quicker through-drying and hardness development at ambient or slightly forced drying conditions (40-60°C). It produces high quality ultra-high solids 2-pack polyurethane lacquers. The shelf of DUROFTAL® FC 2828/75BAC is 365 days.

Support available
Original documents

See the product

DUROFTAL® FC 9511/80BAC

by allnex

DUROFTAL® FC 9511/80BAC by allnex is hydroxy-functional polyester, modified with synthetic fatty acids. It is delivered in the form of 80% in butyl acetate (80BAC). It is used in combination with aliphatic polyisocyanates and is well suited for the production of high quality ultra-high solids 2-pack coatings which may be cured at ambient temperature or under forced drying conditions. Coatings based on DUROFTAL® FC 9511/80BAC are low in volatile organic compounds (VOC) and are characterized by very good mechanical properties, high gloss and excellent exterior durability. It shows markedly quicker through-drying and hardness build-up. The shelf of this product is 365 days.

Support available
Original documents

See the product

DUROFTAL® VPE 6104/60MPAC

by allnex

DUROFTAL® VPE 6104/60MPAC by allnex is an oil-free, saturated polyester. It offers very good levelling at roller application, good deformability and color stability. This product is especially suited for the production of cold-resistant tube coatings and sterilizable, cupping exterior can coatings and aerosol tin paints as well as sealers. DUROFTAL® VPE 6104/60MPAC serves as replacement of epoxy resins in phenol-epoxy-systems in order to get paints which do not contain BADGE or Bisphenol A. It is compatible with some phenolic resins (e.g. Phenodur PR 612 and VPM 1150). Such combinations shows good acid retort resistance, good adhesion and flexibility. It has a shelf life of 730 days.