Return to supplier page
McLube MoS2-98 by McLube is a dry lubricant by itself. It is with a binder to form a dry film coating. Can also be dispersed in oils and greases or in composites of metal, plastic or rubber. Lubricating characteristics of MoS2 are principally due to its familiar crystal structure, which allows for shearing of layers and results in a low coefficient of friction. Acts as a dry lubricant on surfaces by rubbing, tumbling, or dusting. McLube MoS2-98 can also acts as a filler in self lubricating plastics and powder metal parts. McLube 1777 by McLube is a dispersion of PTFE particles which bonds to the surface to generate a colorless, non-oily and adherent dry film coating. Provides the following benefits: multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, reduced buildup on surfaces, corrosion protection of molds and dies, effective release from molds with complex configurations.
End products: belt conveyor, hoses, tyres and inner tubes.
Conversion mode: blow molding, compression molding, encapsulating, extrusion, filament winding, hand lay-up, injection molding, laminating, potting, rotational molding, thermoforming, vacuum forming. McLube 1700L by McLube is a silicone-free release agent. It is a hard, dry, bonded film coating of PTFE that will not transfer to parts. Provides the various benefits like multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, corrosion protection of molds & dies, effective release from molds with complex configurations.<br>
<ul style="padding-left: 40px;"><li>Applications include belt conveyor, hoses, molded articles, tyres and inner tubes.</li>
<li>PTFE dispersion with binding additives offering semi-permanent and non-transferring release characteristics.</li>
<li>It is an excellent dry lubricant and ideal for injection molding.</li>
<li>McLube 1700L offers blow molding, compression molding, coating, encapsulating, extrusion, filament winding, hand lay-up, laminating, potting, rotational molding, thermoforming and vacuum forming.</li></ul> McLube® 1725L by McLube is a release agent and general-purpose dry film lubricant.<br>
<ul style="padding-left: 40px;"><li>Exhibits low friction and very good anti-stick characteristics.</li>
<li>Furnishes a release coating for all types of rubber and plastic compounds and works equally well on metallic and nonmetallic molds at temperatures up to 550°F.</li>
<li>Protects mold surfaces against corrosion while in storage. Contains no grease, stearates, waxes or silicone oil. Requires no curing step.</li>
<li>Will not transfer due to presence of adhesion promoters, not interfere with post finishing operations and not cause knit lines on molded rubber parts.</li>
<li>Offers multiple releases per application.</li>
<li>Provides very good thermal and chemical stability. Imparts increased productivity and reduced scrap rate.</li>
<li>McLube® 1725L protects molds against corrosion during storage.</li>
<li>Used in injection, transfer, compression, RIM molding, potting, laminating, encapsulating, masking and filament winding.</li> McLube 1800 by McLube is water based fluorochemical emulsion. Acts as general purpose release agent. The antistick coatings can be used as a cost effective replacement for silicone oil, soap, wax and powder based formulations. McLube 1711L by McLube is a hard, dry, bonded PTFE release coating for applications to hot surfaces. Offers multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, corrosion protection of molds and dies, effective release from molds with complex configurations. It can be processed by compression molding, coating, extrusion and injection molding. McLube 1711L is used in belt conveyor, hoses, molded articles, tyres and inner tubes. Solvent dispersion of molybdenum disulfide and a soluble adhesion promoter. Dry lubricant coating resulting after evaporation of the solvent has very good adhesion to most substrates and exhibits a low coefficient of friction, high load carrying ability and good durability. Does not contain oil, grease, wax, silicone or graphite. Fast air dry and easy to apply. Requires no curing step. Provides very good adhesion to substrates. Prevents metal-to-metal contact. Increases life of moving parts. Protects against wear, seizure, galling, scoring and corrosion from moisture. Effective over a wide temperature range. Used in threaded connections, conveyors, guide posts, O-rings and seals. Water dilutable PTFE dispersion suitable for release of silicone rubber. Provides the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, corrosion protection of molds and dies, effective release from molds with complex configurations. Fusible, dry film release coating suitable as a semipermanent release surface for silicone and natural rubber. Provides the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing and bonding, reduced buiIdup on surfaces, corrosion protection of molds and dies, effective release from molds with complex configurations. Emulsion of a fluorochemical/resin mixture. Used as a release coating in rubber molding processes and as an antitack coating for uncured rubber to replace talc, mica, etc. Economically replaces conventional release and antistick/antitack agents used in the rubber industry and at the same time offers superior properties to such agents. Will not transfer to molded parts, not interfere with post finishing operations and not cause knit lines. Provides multiple releases per application. Eliminates safety and housekeeping problems experienced with mica, talc, stearates, waxes, etc. Is cost effective, nontransferring and nondusting. Can also be used as release coating for paper processing equipment - rolls, blades, dry cans, etc.
McLube®
Polymer additives supplied by McLube