Return to supplier page
EMAC® SP2255 by Westlake is a soft, flexible, plasticizers free ethylene methyl acrylate (EMA) copolymer grade with 17% methyl acrylate (MA). Contains high slip and antiblock additives. Exhibits good heat & RF sealing, good toughness, good corrosion resistance, good adhesion, excellent environmental stress-cracking resistance (ESCR), high coefficient of friction and high solids fillability. Offers excellent drawdown, low neck-in, broad chemical resistance and processing range. EMAC® SP2255 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC and other polar polymers. Is suitable for processing by blown film and cast film extrusion. Recommended for films, flexible packaging, disposable gloves, tubing, wound care, thin films and medical packaging applications. EMAC+® SP1305 by Westlake is a soft, flexible ethylene methyl acrylate (EMA) copolymer grade with 20% methyl acrylate (MA). Exhibits good toughness, excellent adhesion, high solids fillability, excellent environmental stress-cracking resistance (ESCR) and high coefficient of friction or “surface tack” for nonskid or high-grip surfaces. Offers high melting point, better clarity, improved processing, good low-temperature impact strength. EMAC+® SP1305 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC & other polar polymers and an additional compatibility in polymer alloys. Is suitable for processing by extrusion, coating and compounding. Recommended for films, disposable gloves, wound care and tie layer applications. It is patented under US patent 5804675. EMAC+® SP1330 by Westlake is a soft, flexible ethylene methyl acrylate (EMA) copolymer grade with 22% methyl acrylate (MA). Exhibits good toughness, excellent adhesion, high solids fillability, excellent environmental stress-cracking resistance (ESCR) and high coefficient of friction or “surface tack” for nonskid or high-grip surfaces. Offers high melting point, better clarity, improved processing, good low-temperature impact strength. EMAC+® SP1330 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC & other polar polymers and an additional compatibility in polymer alloys. Is suitable for processing by co-extrusion and blending. Recommended for films, disposable gloves, wound care and tie-layer applications. It is patented under US patent 5804675. EMAC+® SP1358 by Westlake is a soft, flexible ethylene methyl acrylate (EMA) copolymer grade with 21.5% methyl acrylate (MA). Exhibits good toughness, excellent adhesion, high solids fillability, excellent environmental stress-cracking resistance (ESCR) and high coefficient of friction or “surface tack” for nonskid or high-grip surfaces. Offers high melting point, better clarity, improved processing, good low-temperature impact strength. Is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC & other polar polymers and an additional compatibility in polymer alloys. EMAC+® SP1358 is suitable for processing by blown film extrusion and injection molding. Recommended for films, disposable gloves and wound care applications. It is patented under US patent 5804675. EMAC® SP2413 by Westlake is a high molecular weight, soft, flexible ethylene methyl acrylate (EMA) copolymer. It is an ideal impact modifier and compatibilizer. It has lower melting point that provides lower sealing temperature. Used in heat seal layers, blown films, wire and cable jacketing. EMAC® SP2413 is highly fillable having good adhesion and low melting temperature. EMAC+® SP1307 by Westlake is a soft, flexible ethylene methyl acrylate (EMA) copolymer grade with 20% methyl acrylate (MA). Exhibits good toughness, excellent adhesion, high solids fillability, excellent environmental stress-cracking resistance (ESCR) and high coefficient of friction or “surface tack” for nonskid or high-grip surfaces. Offers high melting point, better clarity, improved processing, good low-temperature impact strength. Is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC & other polar polymers and an additional compatibility in polymer alloys. EMAC+® SP1307 is suitable for processing by co-extrusion, coatings and laminations. Recommended for films, disposable gloves, wound care and tie layers applications. It is patented under US patent 5804675. EMAC+® SP1501 by Westlake is a soft, flexible, low viscosity, plasticizers free ethylene methyl acrylate (EMA) copolymer grade with 20% methyl acrylate (MA). Exhibits excellent elasticity, good strength, good toughness, excellent adhesion, high solids fillability, excellent environmental stress-cracking resistance (ESCR) and high coefficient of friction or “surface tack” for nonskid or high-grip surfaces. Offers high melting point, better clarity, improved processing, good low-temperature impact strength. EMAC+® SP1501 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC & other polar polymers and an additional compatibility in polymer alloys. Is suitable for processing by extrusion coating and compounding. Complies with FDA 21 CFR 177.1340 regulation. EMAC® SP2268 by Westlake is a soft, flexible, plasticizers free ethylene methyl acrylate (EMA) copolymer grade with 24% methyl acrylate (MA). Exhibits good heat & radio frequency (RF) sealing, good toughness, good corrosion resistance, good adhesion, excellent environmental stress-cracking resistance (ESCR), high coefficient of friction and high solids fillability. Offers excellent drawdown, low neck-in, broad chemical resistance and processing range. EMAC® SP2268 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC and other polar polymers. Is suitable for processing by injection molding, compounding and lamination. Recommended for films, flexible packaging, disposable gloves, IV containers, tubing and wound care applications. EMAC® SP2220 by Westlake is a soft, flexible, plasticizers free ethylene methyl acrylate (EMA) copolymer grade with 20% methyl acrylate (MA). Exhibits good toughness, good corrosion resistance, good adhesion, excellent environmental stress-cracking resistance (ESCR), high coefficient of friction and high solids fillability. Offers excellent drawdown, low neck-in, broad chemical resistance and processing range. EMAC® SP2220 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC and other polar polymers. Is suitable for processing by extrusion coating and injection molding. Recommended for films, disposable gloves, tubing and wound care, applications. EMAC® SP2403 by Westlake is a soft, flexible, plasticizers free ethylene methyl acrylate (EMA) copolymer grade with 24% methyl acrylate (MA). Exhibits good toughness, good corrosion resistance, good adhesion, excellent environmental stress-cracking resistance (ESCR), high coefficient of friction and high solids fillability. Offers excellent drawdown, low neck-in, broad chemical resistance and processing range. EMAC® SP2403 is compatible with various polymers including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVC, unplasticized PVC and other polar polymers. Is suitable for processing by co-extrusion, compounding and lamination. Recommended for films, disposable gloves, tubing, wound care and tie layers applications.
EMAC®
Plastics and elastomers supplied by Westlake