Return to supplier page
Lifoflex® UV 30 GA 1030 by HEXPOL COMPOUNDING is a UV resistant styrene ethylene butylene styrene (SEBS) copolymer based thermoplastic elastomer (TPE). Exhibits resistance against aqueous solutions, inorganic acids & bases, good adhesion to PP/PE, excellent mechanical properties, hardness and recyclability. Is a physiologically harmless grade offering good processability and high flexibility. It can be processed by injection molding. Used in consumer/household applications such as sealing for storage boxes, soft-touch surfaces for packaging & 2-component grips for kitchen equipment, soft seats for sledges, wheels for toy cars & toy characters and sports & leisure markets for bicycle grips, soft touch grips for hiking, nordic walking sticks & fins. It is also used in sealing for electronic housings and grips for toothbrushes, sealing & closures for packaging and anti-slip grips for baby tableware for healthcare industry. Conforms with FDA, 10/2011/EC and EN71/3 (toys), european directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UV FLAM 60700 by HEXPOL COMPOUNDING is a halogen, chlorine & antimony-free thermoplastic elastomer (TPE). It exhibits flame retardancy without the use of polybrominated diphenyl ether (PBDE), thereby offering resistance to ignition & burning and good processability. It possesses high flexibility, low smoke generation, hardness, complete scrap recyclability, good adhesion to PP/PE and good mechanical properties. It can be processed by injection molding and extrusion. Lifoflex® UV FLAM 60700 is used in cables, cable grommets, plug top, electrical insulation, cords & connectors, cavity wall sockets and miscellaneous gasket profiles. It conforms to European directives 2011/65/EU (RoHS) and 2003/11/EC. Lifoflex® UV 50 GB 1050 is an UV resistant styrene ethylene butylene styrene (SEBS) copolymer based thermoplastic elastomer (TPE). Exhibits resistance against aqueous solutions, inorganic acids & bases, good adhesion to PP/PE, excellent mechanical properties, hardness and recyclability. Is a physiologically harmless grade offering good processability and high flexibility. It can be processed by injection molding. Used in consumer, household applications such as sealing for storage boxes, soft-touch surfaces for packaging & 2-component grips for kitchen equipment, soft seats for sledges, wheels for toy cars & toy characters and sports & leisure markets for bicycle grips, soft touch grips for hiking, nordic walking sticks & fins. It is also used in sealing for electronic housings and grips for toothbrushes, sealing & closures for packaging and anti-slip grips for baby tableware for healthcare industry. Conforms with FDA, 10/2011/EC and EN71/3 (toys), European directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UV FLAM 80600 by HEXPOL COMPOUNDING is a halogen, chlorine & antimony-free thermoplastic elastomer (TPE). It exhibits flame retardancy without the use of polybrominated diphenyl ether (PBDE), thereby offering resistance to ignition & burning and good processability. It possesses high flexibility, low smoke generation, hardness, complete scrap recyclability, good adhesion to PP/PE and good mechanical properties. Lifoflex® UV FLAM 80600 can be processed by injection molding and extrusion. It is used in cables, cable grommets, plug top, electrical insulation, cords & connectors, cavity wall sockets and miscellaneous gasket profiles. It conforms to European directives 2011/65/EU (RoHS) and 2003/11/EC. Lifoflex® UV 30 GB 1030 is a UV resistant styrene ethylene butylene styrene (SEBS) copolymer based thermoplastic elastomer (TPE). Exhibits resistance against aqueous solutions, inorganic acids & bases, good adhesion to PP/PE, excellent mechanical properties, hardness and recyclability. Is a physiologically harmless grade offering good processability and high flexibility. It can be processed by injection molding. Used in consumer/household applications such as sealing for storage boxes, soft-touch surfaces for packaging & 2-component grips for kitchen equipment, soft seats for sledges, wheels for toy cars & toy characters and sports & leisure markets for bicycle grips, soft touch grips for hiking, nordic walking sticks & fins. It is also used in sealing for electronic housings and grips for toothbrushes, sealing & closures for packaging and anti-slip grips for baby tableware for healthcare industry. Conforms with FDA, 10/2011/EC and EN71/3 (toys), european directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UV 60 GC 1060 is a UV resistant styrene ethylene butylene styrene (SEBS) copolymer based thermoplastic elastomer (TPE). Exhibits resistance against aqueous solutions, inorganic acids & bases, good adhesion to PP/PE, excellent mechanical properties, hardness and recyclability. Is a physiologically harmless grade offering good processability and high flexibility. It can be processed by injection molding. Used in consumer/household applications such as sealing for storage boxes, soft-touch surfaces for packaging & 2-component grips for kitchen equipment, soft seats for sledges, wheels for toy cars & toy characters and sports & leisure markets for bicycle grips, soft touch grips for hiking, nordic walking sticks & fins. It is also used in sealing for electronic housings and grips for toothbrushes, sealing & closures for packaging and anti-slip grips for baby tableware for healthcare industry. Conforms with FDA, 10/2011/EC and EN71/3 (toys), european directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UVX 27.01 B038-5 by Hexpol is a thermoplastic elastomer (TPE) grade. Offers excellent bonding to polyamide PA6, PA66, PA12, including glass fiber reinforced polyamide. Exhibits soft-touch appeal, high flexibility, faster cycle times, wide processing window, easy processing and colorability, high resistance to oil and chemical. Can easily be over-molded and co-extruded with PA. Designed for injection molding and extrusion applications. Lifoflex® UVX 27.01 B038-5 is recommended for wheels & tires, power tools, two component grips, housings, technical parts and automotive (sealings, gaskets & dampning systems). Complies with European Directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UVX 40.01 B038-8 by Hexpol is a thermoplastic elastomer (TPE) grade. Offers excellent bonding to polyamide PA6, PA66, PA12, including glass fiber reinforced polyamide. Exhibits soft-touch appeal, high flexibility, faster cycle times, wide processing window, easy processing and colorability, high resistance to oil and chemical. Can easily be over-molded and co-extruded with PA. Designed for injection molding and extrusion applications. Lifoflex® UVX 40.01 B038-8 is recommended for wheels & tires, power tools, two component grips, housings, technical parts and automotive (sealings, gaskets & dampning systems). Complies with European Directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UV 80 GC 1080 is a UV resistant styrene ethylene butylene styrene (SEBS) copolymer based thermoplastic elastomer (TPE). Exhibits resistance against aqueous solutions, inorganic acids & bases, good adhesion to PP/PE, excellent mechanical properties, hardness and recyclability. Is a physiologically harmless grade offering good processability and high flexibility. It can be processed by injection molding. Used in consumer/household applications such as sealing for storage boxes, soft-touch surfaces for packaging & 2-component grips for kitchen equipment, soft seats for sledges, wheels for toy cars & toy characters and sports & leisure markets for bicycle grips, soft touch grips for hiking, nordic walking sticks & fins. It is also used in sealing for electronic housings and grips for toothbrushes, sealing & closures for packaging and anti-slip grips for baby tableware for healthcare industry. Conforms with FDA, 10/2011/EC and EN71/3 (toys), european directives 2002/95/EC (RoHS) and 2003/11/EC. Lifoflex® UVX 58.01 B045-3 by Hexpol is a thermoplastic elastomer (TPE) grade. Offers excellent bonding to polyamide PA6, PA66, PA12, including glass fiber reinforced polyamide. Exhibits soft-touch appeal, high flexibility, faster cycle times, wide processing window, easy processing and colorability, high resistance to oil and chemical. Can easily be over-molded and co-extruded with PA. Designed for injection molding and extrusion applications. Lifoflex® UVX 58.01 B045-3 is recommended for wheels & tires, power tools, two component grips, housings, technical parts and automotive (sealings, gaskets & dampning systems). Complies with European Directives 2002/95/EC (RoHS) and 2003/11/EC.
Lifoflex®
Plastics and elastomers supplied by HEXPOL COMPOUNDING
42 Products match your search
Lifoflex® UV 30 GA 1030
by HEXPOL COMPOUNDING
- Sustainable option