Supplier Page
FKuR
OverviewProducts53Brands6Products families8News1

Biograde® (Plastics and elastomers)

Supplied by FKuR

6 Products match your search

Biograde® C 5508

by FKuR

Biograde® C 5508 by FKuR is a biodegradable, thermally stabilized, water insoluble, plasticizer-free cellulose acetate obtained from sustainable forestry wood. Contains high amount of renewable raw materials and additives. It has >60% bio-based carbon content (BCC). Exhibits high stiffness, high tensile & impact strength, short cycle times and good surface finish. Biograde® C 5508 is designed for processing by injection molding and cast film extrusion. Suitable for use as a packaging material in food contact applications and the production of components with thin wall thicknesses and long flow paths. Possible applications could be electronics, appliance, consumer products such as toothbrushes, ball-point pens, cutlery and toys. Complies with CLP regulation (EC) No. 1272/2008, EN 71-3, food contact regulations EN 10/2011 and US FDA.
  • Sustainable option
See the product

Biograde® C 6509 CL

by FKuR

Biodegradable polymer-blend based on cellulose acetate (CA) contains additives. It is derived from partially natural resource material but does not contain any starch or starch derivatives. Possesses high content of natural resource materials, excellent heat resistance-up to 115 °C. It is injection moldable on conventional injection molding equipment and is processable with multi-cavity molds. Used in flat sheet / film suitable for thermoforming on conventional deep drawing machinery.
See the product

Biograde® C 9550

by FKuR

Biodegradable polymer-blend based on cellulose acetate (CA) and additives. It is derived from partially natural resource material but does not contain any starch or starch derivatives. Possesses high content of natural resource materials, excellent heat resistance-up to 115 °C. It is injection moldable on conventional injection molding equipment and is processable with multi-cavity molds. Used in flat sheet / film suitable for thermoforming on conventional deep drawing machinery. Commonly molded into disposable cutlery, it is also possible to process into many other more complex products on standard injection molding machines equipped with a general purpose screw.
See the product

Biograde® C 6530

by FKuR

Biodegradable polymer-blend based on cellulose acetate (CA), special additives and a high percentage of fillers. It is derived from partially natural resource material but does not contain any starch or starch derivatives. Possesses high content of natural resource materials, excellent heat resistance-up to 115 °C. It is injection moldable on conventional injection molding equipment and is processable with multi-cavity molds. Used in flat sheet / film suitable for thermoforming on conventional deep drawing machinery. Suitable for production of injection molded rigid parts particularly those with thin wall and long flow paths. Used to produce items such as heat-resistant cups and electrical articles.
See the product

Biograde® C 5509 CL

by FKuR

Biograde® C 5509 CL by FKuR is a biodegradable, thermally stabilized, water insoluble, plasticizer-free cellulose acetate obtained from sustainable forestry wood. Contains high proportion of renewable raw materials and additives. It has >60% bio-based carbon content (BCC). Exhibits high stiffness, high tensile & impact strength, short cycle times and good surface finish. It is designed for processing by injection molding. Suitable for use as a packaging material in food contact applications and the production of components with thin wall thicknesses and long flow paths. Possible applications could be electronics, appliance, consumer products such as toothbrushes, ball-point pens, cutlery and toys. Biograde® C 5509 CL complies with CLP regulation (EC) No. 1272/2008, EN 71-3, food contact regulations EN 10/2011 and US FDA.
  • Sustainable option
See the product

Biograde® C 7500

by FKuR

Biograde® C 7500 by FKuR is a biodegradable polymer-blend based on cellulose acetate (CA) contains additives. It is derived from partially natural resource material but does not contain any starch or starch derivatives. Possesses high content of natural resource materials, excellent heat resistance-up to 115 °C. It is injection moldable on conventional injection molding equipment and is processable with multi-cavity molds. Biograde® C 7500 is used in flat sheet / film suitable for thermoforming on conventional deep drawing machinery. Examples of molded products include ball pens, cosmetic pencils & bottles.
  • Sustainable option
See the product
Showper page

Most Popular Brands

Bio-Flex®

by FKuR

25 products
See All Products

Terraprene®

by FKuR

9 products
See All Products

Terralene®

by FKuR

8 products
See All Products

Biograde®

by FKuR

6 products
See All Products