PRE-ELEC® ESD 6300 by Premix is a static dissipative high impact polystyrene (HIPS) grade. Exhibits surface resistance, achieved with optimum processing parameters. Designed for extrusion of thermoformable multilayer sheets and injection molding processes. Products made from PRE-ELEC® ESD 6300 are washable, reusable and recyclable. Suitable for manufacturing of molded boxes, bins, thermoformed trays and clamshells when permanent electrostatic discharge (ESD) protection is required. Used in electronics, medical, pharmaceutical and paper handling industries.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| CI Name | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
PRE-ELEC® ESD 6300 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Static Decay Rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
PRE-ELEC® ESD 6300 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cylinder Temperature (Zone 1) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Zone 2) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Zone 3) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Zone 4) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Zone 5) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Zone 6) | Visible After Login | Visible After Login | |
| Die Temperature (Zone 1) | Visible After Login | Visible After Login | |
| Die Temperature (Zone 2) | Visible After Login | Visible After Login | |
| Die Temperature (Zone 3) | Visible After Login | Visible After Login | |
| Die Temperature (Zone 4) | Visible After Login | Visible After Login | |
| Die Temperature (Zone 5) | Visible After Login | Visible After Login | |
| Rolls Temperature (1st) | Visible After Login | Visible After Login | |
| Rolls Temperature (2nd) | Visible After Login | Visible After Login | |
| Rolls Temperature (3rd) | Visible After Login | Visible After Login | |
Extrusion/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Pre-Drying Temperature | Visible After Login | Visible After Login | |
| Pre-drying Time | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Speed | Visible After Login | Visible After Login | |
| Material Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Post Pressure | Visible After Login | Visible After Login | |