POTICON NT46 by Otsuka Chemical is a tough, special polyamide (PA) grade by Otsuka Chemical, reinforced with ultra-fine potassium titanate fiber (TISMO). Offers superior friction sliding, reduced wear, surface smoothness, dimensional accuracy and recyclability. Provides easy processability, decreased processing costs and low damage towards the mold & metal die. POTICON NT46 is suitable for processing by injection molding. Recommended for automotive parts (gears, bearings), LED reflectors, watch parts (gears, ground plane), camera image stabilization & module parts, sliding parts (gears, wheel bearing) and motor parts (cog-wheels, bearings).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
POTICON NT46 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Coefficient of Friction (COF) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Abrasion Volume | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Abrasion of Counterpart | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CTE, Linear | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
POTICON NT46 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Injection Pressure | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Tool temperature | Visible After Login | Visible After Login | |