Technical datasheet
KEBAFLOW LCP HF130 (FE 190203*)
Supplied byBarlog Plastics- Last Updated on Aug 26, 2025
KEBAFLOW LCP HF130 (FE 190203*) by Barlog Plastics is a semi-crystalline, liquid crystal polymer (LCP) reinforced with 30% short glass fiber. It is characterized by good flowability at thin wall thicknesses, very good toughness & strength, very high heat resistance and inherent flame retardancy. This grade exhibits high heat deflection temperature (HDT ~300°C), good aging & fire behavior, dimensional stability and good chemical resistance. KEBAFLOW LCP HF130 (FE 190203*) displays high continuous operating temperature. It is used in pressure cans, LED housing, luminaire housing, relay, bobbin and plugs. This product targets automotive, electrical & electronics industry, household appliances and mechanical engineering industries.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
KEBAFLOW LCP HF130 (FE 190203*) properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Contact Resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating, UL 94 | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Breaking Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Transverse | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
KEBAFLOW LCP HF130 (FE 190203*) Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Injection Speed | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |