Technical datasheet
KEBABLEND / EC FE 170905 PPS
Supplied byBarlog Plastics- Last Updated on Jan 6, 2024
KEBABLEND / EC FE 170905 PPS by Barlog Plastics is an antistatic, electrically conductive, semi-crystalline polyphenylene sulfide (PPS) functionalized compound reinforced with carbon fiber and graphite. It offers good fire behavior, high continuous used temperature, high strength and stiffness.
- It provides dimensional stability, good chemical resistance and good aging behavior.
- It is suitable for processing by injection molding.
- Used in automotive, electrical & electronics industry, household appliances, aviation industry and mechanical engineering.
- KEBABLEND / EC FE 170905 PPS also used in components in gears, sliding elements, plain bearing, piston, couplings, pumps & motors, sensors, bobbin, transport chains, valves and valve caps.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
KEBABLEND / EC FE 170905 PPS properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Breaking Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Transverse | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Glass Transition Temperature (Tg) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
KEBABLEND / EC FE 170905 PPS Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |