Plastics and elastomers for Automotive

ForTii® Ace MX51 by Envalior is a heat stabilized, 30% glass-reinforced, PPA (PA4T) for automotive applications. It is a PPA with unique fatigue performance and chemical resistance. The high aromatic content and high Tg lead to excellent part stiffness and low creep, even up to 150°C. The moisture uptake occurs slowly with a very limited impact on dimensions. ForTii® Ace MX51 is suitable for processing by injection molding. It is used in structural parts with ForTii® Ace.

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

EP30DP-NV by Master Bond is a versatile two component epoxy (EP) system for bonding, sealing, coating & encapsulation applications. It offers superior toughness, abrasion resistance, low viscosity and excellent electrical insulation. It is 100% reactive which does not contain any solvents or diluents.

• Its rigidity is modified by the addition of a urethane based flexibilizer and it confers a lower shore D hardness to the cross linked entity.
• It exhibits higher elongation, long working life, low exotherm, and is cryogenically serviceable.
• It withstands rigorous thermal cycling, shock and mechanically induced vibrations.
• It bonds well to a wide variety of substrates including metals, ceramics, composites, glass and many plastics.
• It cures readily at ambient temperatures or more rapidly at elevated temperatures.
• It is used in electronics, aerospace, optical, specialty OEM and other applications.
• It has a shelf life of 6 months at 75°F in original, unopened containers.
• EP30DP-NV is RoHS complaint.

EP5G-80 is a graphite filled, one-component epoxy (EP) system by Master Bond. Exhibits low coefficient of thermal expansion, good lubricity and good thermal- & electrical conductivity. Provides low shrinkage, good strength, high modulus, compressive strength and good dimensional stability. Offers good resistance to water, oil and fuel. Used in electronic, aerospace, medical device, optical and OEM applications. Other applications include lithium ion batteries, fuel cells and carbon brushes. The shelf life of EP5G-80 is 3-6 months. Meets RoHS and NASA low outgassing specifications.

Supreme 10HT by Master Bond is a durable, one-component epoxy (EP) system. Provides high adhesion, viscosity, high sheer- & peel strength, low shrinkage and good dimensional stability. Exhibits good electrical insulation, toughness, versatile cure schedules and good thermal cycling ability. It is a 100% reactive, cryogenically serviceable grade and offers resistance to mechanical & thermal shocks. Also resists many chemicals, such as acids, bases, water, oil, fuels and solvents. Cryogenically serviceable, it is suitable for aerospace, electronic, electrical, computer and metalworking applications. Other applications includes appliance, automotive and chemical industries. applications. The shelf life of Supreme 10HT is 3-6 months. Meets RoHS and NASA Low Outgassing specification.

EP4S-80 by Master Bond is a silver-filled, one component epoxy (EP) system. It has low viscosity and offers good flow, dimensional stability, low shrinkage, high modulus and good compressive strength. Offers good electrical conductivity and exhibits good water-, oil- and fuel resistance. Recommended for electronic, opto-electronics, acoustical, PCB assembly and automotive applications. It has a shelf life of 3-6 months. EP4S-80 meets RoHS and NASA Low Outgassing specifications.

ForTii® F11 by Envalior is a halogen- and red phosphorous-free, chemical resistant, 30% glass-reinforced PPA, polyamide 4T (PA4T) grade. It is suitable for processing by injection molding. It offers an excellent balance in flow, toughness and stiffness, enabling thin walls or complicated geometries for E&E applications. ForTii® F11 is all-color VDE approved, has a high RTI electrical rating of 140°C at 0.75 mm and CTI =800V rating to secure thermal aging and electrical performance. It is used in automotive e-motor bobbins, brush holders (electro motors), coil insulation, contactors, EGR sensor, laminates (electro motors), battery-, FPC-, HDMI-, WtB and BtB-, reflow connectors, reflow connectors (2), reflow connectors (3) as well as speed-, temperature-, position sensor, MCCB housings, fuse holder, high voltage connector e-motor, industrial control gear, medium voltage circuit breaker isolators, medium voltage circuit breaker, micro appliance connector, miniature circuit breakers, molded case circuit breakers, motor starter/overload relays, start/stop: alternator and starter parts.

ForTii® JTX2 by Envalior is an electro-friendly, PPA (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding and shows consistent performance. It offers good chemical resistance, robust mechanical performance and has good reliability in thermal aging and mechanical shocks. It possesses low risk of blistering due to its JEDEC MLS 1 rating for specified thicknesses. It is recommended for HB reflow headers/connectors in (automotive) electronics. ForTii® JTX2 is used in automotive reflow connectors and car computer control system.

LNP™ THERMOTUF™ Compound MF0049I by SABIC is a compound based on flame retarded, impact resistant & modified, PFAS-free, unspecified polypropylene resin that is reinforced with 20% glass fiber. It exhibits high stiffness & strength. It can be processed by injection molding. LNP™ THERMOTUF™ Compound MF0049I is used in consumer applications like sports/leisures, personal accessory, electrical industry and electronic applications such as mobile phones, computers and tablets. It is suitable for automotive & aerospace applications.

LNP™ COLORCOMP™ Compound D10006U by SABIC is an UV stabilized, flame retardant, unreinforced polycarbonate resin. It provides heat stability and good mold release. It offers aesthetic appearance and durability. It is available in custom colors. It is suitable for processing by injection molding. LNP™ COLORCOMP™ Compound D10006U is used in automotive interiors, electrical devices & displays, sport/leisure, personal accessory, home & commercial appliances, electrical components and Infrastructure, electronics and consumer applications.