Plastics and elastomers for Co-extrusion

ForTii® Ace XTR31S by Envalior is an unreinforced, lubricated, medium/high viscosity, PPA (PA4T). This high-temperature polyamide has excellent viscosity stability, chemical resistance, barrier performance and stable processing. It is used in many coextrusion and pultrusion processes.

ACRYLITE® SunResist ZS61 Polymer by Roehm is an impact-modified, amorphous polymethyl methacrylate (PMMA) grade. It is suitable for processing by injection molding and co-extrusion. Exhibits high heat-, weather-, scratch-, chemical-, abrasion and stress cracking resistance. It offers enhanced UV light absorption, good melt flow rate, and low lubricant levels.

• It forms an ultra‑thin co‑extruded protective layer that blocks harmful UV light up to 400 nm, helping preserve color and surface integrity and reducing fading and degradation over time.
• It exhibits high UV light resistance, durability and excellent transmission.
• It provides high flexural strength, strong notched izod impact resistance, and elevated heat deflection temperature.
• It elevates finished parts with a premium surface quality.
• Offers precise gloss control and surface hardness, enabling high-end aesthetics without sacrificing robustness.
• It is recommended for outdoor applications including outdoor furniture, transportation, recreational components, and sanitaryware (pools, shower panels, outdoor sinks and spa).
• It is used in building and constructions, including window profiles, doors, decking, cladding, siding, railing and fencing.
• ACRYLITE® SunResist ZS61 Polymer is certified to ISO 9001:2015, ISO 14001:2015 and IATF 16949:2016.

SYNDIGO™ rPE-IN4 by NOVA Chemicals is a 100% post-consumer recycled linear low-density polyethylene and low-density polyethylene (rLLDPE/LDPE) resin. It contains a processing antioxidant and is intended for non-food-grade applications. It is recommended for use as a general-purpose film, a core layer in co-extrusion films, or a blend component. It is suitable for heavy duty shipping sacks, collation shrink, E-commerce packaging, void fill and carry out bags. SYNDIGO™ rPE-IN4 is manufactured from recycled mixed retail PE film.

SYNDIGO™ rPE-IN3 by NOVA Chemicals is a 100% post-consumer recycled linear low-density polyethylene (rLLDPE) resin. It contains a processing antioxidant and is intended for non-food-grade applications. SYNDIGO™ rPE-IN3 is manufactured from recycled PE stretch films. It is suitable for use as a general-purpose film, a core layer in co-extrusion films, or a blend component in applications such as hand stretch, air bubble packaging, can liners, and overwrap.

TOPAS® 8007F-600 by Topas Advanced Polymers (Polyplastics) improves the performance of polyethylene packaging. This transparent, amorphous, food-grade ethylene-cyclic olefin copolymer (COC) resin offers performance and qualities that PE by itself cannot. Barrier (moisture, nitrogen), stiffness, shrinkage, deadfold, simple and linear rip, thermoformability, curl control, glossy EBM container skins, and other features have commercial applications. It permits the creation of higher-value films on conventional PE film lines. Generally speaking, films containing 8007F-600 can be recovered and recycled with PE. Broad processing window suited for extruding cast and blown films; coextruded without tie layers with PE. For direct food contact, TOPAS® 8007F-600 by Topas Advanced Polymers (Polyplastics) complies with FDA regulation 21 CFR 177.1520 and is offered globally.

AFFINITY™ PL 1888Q Polyolefin Plastomer by Dow is a polyolefin plastomer (POP) resin. It is used for high-speed packaging applications that require a low seal initiation temperature and excellent machinability. It is designed to run fast and trouble-free on most extrusion equipment, including blown film dies.

• It offers low consistent coefficient of friction (COF) of less than 0.2 for a ~1.0 mil sealant layer in a coextruded film.
• It is suitable for use in monolayer films and as the sealant layer in multilayer films.
• It is ideal for packaging of fresh-cut produce, meat, cheese, and other applications.
• AFFINITY™ PL 1888Q Polyolefin Plastomer enables fast processing even on narrow die gaps.
• It contains 3000 ppm antiblock and 1500 ppm slip additives to enhance performance.
• It complies with U.S. FDA FCN 424, EU No 10/2011 and Canadian HPFB No Objection.

SURPASS® VPsK914-A by NOVA Chemicals is octene-based, linear low density polyethylene (LLDPE) copolymer grade that contains a processing antioxidant. Offers outstanding melt strength for superior bubble stability.

• Exhibits excellent seal properties, low gel and haze.
• SURPASS® VPsK914-A is suitable for processing by blown film extrusion.
• Designed for maximum output on high-performance lines.
• It is recommended for co-extruded sealant layer, lamination and high toughness film.

SURPASS® VPsK914-D by NOVA Chemicals is octene-based, linear low density polyethylene (LLDPE) copolymer grade. It contains antioxidant, non-fluorinated polymer processing aid (PPA), slip (1000 ppm) and anti-blocking (2500 ppm) additive.

• Provides excellent seal properties, low gel and haze.
• Offers outstanding melt strength for superior bubble stability.
• It is suitable for processing by blown film extrusion.
• SURPASS® VPsK914-D is applicable for co-extruded sealant layer, lamination and high toughness film.
• Designed for maximum output on high-performance lines.

SURPASS® SPs116-D by NOVA Chemicals is octene-based, linear low density polyethylene (LLDPE) copolymer grade. It contains antioxidant, slip (1000 ppm), anti-block (2500 ppm) and non-fluorinated polymer processing aid (PPA).

• It is applicable for co-extruded sealant layer and lamination film.
• Exhibits excellent seal properties, optics, toughness with tear strength.
• SURPASS® SPs116-D is suitable for processing by blown film extrusion.
• Complies with FDA regulation 21 CFR 177.1520 for olefin polymers, para. (c) 3.2a.

SURPASS® VPsK914-CN02 by NOVA Chemicals is octene-based, linear low density polyethylene (LLDPE) copolymer grade. It contains antioxidant, gas-fade-resistant and non-fluorinated polymer processing aid (PPA). Provides excellent seal properties, low gel and haze.

• Exhibits outstanding melt strength for superior bubble stability.
• SURPASS® VPsK914-CN02 is applicable for co-extruded sealant layer, lamination and high toughness film.
• Designed for maximum output on high-performance lines.
• It is suitable for processing by blown film extrusion.