Return to supplier page
Touch ANSET 3000 by Touch Chem is based on linear structure polyamide polymer. Acts as an anti-settling agent. It contains a special function group that enhances hydrogen bond formation resulting in better anti-settling effect. It prevents heavy pigments or filler to form hard settling. It exhibits high thixotropic behavior and has no influence on gloss of a high gloss top coat. It can be added during the grinding stage or as a post added anti-settling agent. A low shear force of 6.0 m/s spiracles velocity is needed to ensure its good incorporation. It is used for all solvent based coating systems. It is recommended for non-aqueous system. Touch ANSET 3000 is suitable for use in polyurethane, NC, thermoplastic acrylic, alkyd-urea acid curing system, epoxy, CAB system, etching primer and unsaturated polyester. Recommended dosage is 0.2-1%. Touch ANSET 3300 by Touch Chem is an oxidized polyethylene based anti-settling agent for solvent borne coating systems. It contains a special function group that enhances hydrogen bond formation resulting in better anti-settling effect. It prevents heavy pigments or filler to form hard settling. It exhibits high thixotropic behavior and has no influence on gloss of a high gloss top coat. It is recommended to be added during n the pre-mix stage in order to have enough shear force to disperse them into the desire fineness. Touch ANSET 3300 is suitable for wood coating sealer and primer in NC, AC and polyurethane, epoxy primer, air dry alkyd primer, and baking paint primer. It is used for semi gloss and matted wood coating topcoat, aerosol paint and TPA system. Its recommended dosage level is 0.2–1.0%. Touch ANSET 3010 by Touch Chem chemical composition is based on linear structure of oxidized polyethylene polymer. Acts as an anti-settling agent. It contains a special function group that enhances hydrogen bond formation resulting in better anti-settling effect. Prevents heavy pigments or filler to form hard settling. Exhibits high thixotropic behavior and has no influence on gloss of a high gloss top coat. It can be added during the grinding stage or as a post added anti-settling agent. A low shear force of 6 m/s spiracles velocity is needed to ensure its good incorporation. Used for all solvent based coating systems. Touch ANSET 3010 is recommended for non-aqueous system.
Touch ANSET
Coating ingredients supplied by Touch Chem
3 Products match your search
Touch ANSET 3000
by Touch Chem
Touch ANSET 3300
by Touch Chem
Touch ANSET 3010
by Touch Chem
Showper page