Return to supplier page
Patinal® Silicon dioxide by Susonity is a low refractive index evaporation material for multilayer coatings in combination with titanium oxide, hafnium oxide, tantalum pentoxide, or Patinal® Substances H1, H2, or H4 . <br> <ul style="padding-left: 40px;">
<li> It is suitable for optical and functional coatings. </li>
<li> Patinal® Silicon dioxide is recommended for antireflection (AR) coatings for low temperature deposition on plastic substrates, laser coatings for ultraviolet (UV) applications, protective coating on Al-coatings. </li></ul> Patinal® Substance H8 by Susonity is an evaporation material. It is a high refractive index material composed of a mixture of titanium oxide and niobium oxide. It was developed for coatings on polymers with focus on stable evaporation conditions, low thermal substrate load and excellent UV-blocking. <br> <ul style="padding-left: 40px;">
<li> It is used in ophthalmic, broadband anti-reflective (BBAR) coatings for precision optics. </li></ul> Patinal® Lanthanum fluoride by Susonity is a medium refractive index evaporation material for coatings in infrared (IR) spectral range. Its predominant application is in the UV wavelength range as a high index material for optical multilayer coatings, especially for semiconductor lithography optics. It is recommended for AR and HR coatings for laser applications in the V-UV spectral range, e.g., at excimer wavelengths 157nm and 193nm, often in combination with MgF<sub>2</sub>. Patinal® Neodymium fluoride by Susonity is a high index evaporation material for optical multilayer coatings in the UV spectral range. It is recommended for deep ultraviolet (DUV)/ vacuum ultra-Violet (VUV) multilayer coatings at 193 nm (ArF excimer laser). Patinal® Magnesium fluoride low oxide by Susonity is an evaporation material for optical and functional coatings. It is used in low index material in the wavelength region ultraviolet/near infrared spectroscopy (UV-NIR). It has a reduced oxygen contamination level compared to standard magnesium fluoride products which can be advantageous in highly absorption and defect critical applications. Patinal® Magnesium fluoride low oxide is used in antireflection (AR) coatings on glass for VIS & NIR, multilayer coatings for beam-splitters & filters and protective layers on aluminium. Patinal® Silicon monoxide by Susonity is an evaporation material for a wide variety of applications with the emphasis on infrared (IR) and visible spectroscopy (VIS) range. It offers adhesion promotion in VIS, NIR. SiO sublimes and should preferably be evaporated from resistance heated boats. Patinal® Silicon monoxide is used in multilayer coatings, iridescent coatings, colored metallically reflecting coatings e.g., on sunglasses and web coating (barrier layers on polymer films). Patinal® Magnesium fluoride by Susonity is a low index evaporation material for ultraviolet/near infrared spectroscopy (UV-NIR) wavelength. It has a reduced oxygen contamination level compared to standard magnesium fluoride products which can be advantageous in highly absorption and defect critical applications. Patinal® Magnesium fluoride is used in antireflection (AR) coatings on glass, multilayer coatings for beam-splitters, filters, and protective layers on aluminium. Patinal® Silver by Susonity is an evaporation material for optical and functional coatings. Thin films made from it shows a reflectivity of about 97% in the visible spectrum. Silver forms highly reflective but very sensitive surfaces; therefore, it requires proper protective coatings to avoid tarnishing of the coating. Patinal® Silver is used in coatings for electronics. Patinal® Black A by Susonity is an evaporation material. It is a light gray powder mixture that can be used to produce dark-brown to black low reflectance layers on glass and plastics. These appears brownish in non-black transmission and are hard, adhesive and resistant against humid air & salt solutions. These are not affected by temperature. Patinal® Black A is used in light absorbing filters, sunglasses, scales, decorative-, functional- and black coatings for optical applications. Patinal® Substance WR1 by Susonity is an evaporation material consisting of carrier tablets made of an oxide mixture doped with a perfluorinated silane. It is developed for the deposition of hydrophobic layers by vacuum evaporation. Top coatings on AR coated glass or plastic lenses exhibit a very low wettability by water and therefore a lowered tendency to be contaminated by grease and fingerprints. Patinal® Substance WR1 is used in hydrophobic & oleophobic topcoat for ophthalmic lenses and AR coated glasses.
Patinal
Coating ingredients supplied by Susonity
31 Products match your search
Patinal® Silicon dioxide
by Susonity
Patinal® Substance H8
by Susonity
Patinal® Lanthanum fluoride
by Susonity
Patinal® Neodymium fluoride
by Susonity
Patinal® Magnesium fluoride low oxide
by Susonity
- Sustainable option
Patinal® Silicon monoxide
by Susonity
Patinal® Magnesium fluoride
by Susonity
- Sustainable option