Return to supplier page
CeraSPERSE 31 (Old name: EverGlide 31) by Shamrock Technologies acts as a slip control- and abrasion resistance agent. It is carnauba wax compounded in butyl Carbitol™ (diethylene glycol monobutyl ether). It allows the production of 1 micron wax dispersion. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention and abrasion resistance properties. It is slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. Recommended dosage level is 2-3%. It meets the requirements of 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180. CeraSPERSE 321BG by Shamrock Technologies acts as a slip control agent and abrasion resistance agent. It is a compound of waxes and PTFE in Butyl CARBITOL™ (diethylene glycol monobutyl ether). It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention and abrasion resistance properties. It is slow-evaporating, hydrophilic glycol ether provides improved compatibility with both polar and non-polar systems. CeraSPERSE 321BG can be used in both solvent-based and water-based coatings. Recommended dosage level is 2-4%. It meets the requirements of 21 CFR 175.105, 175.300 and 176.180. CeraSPERSE 171 by Shamrock Technologies acts as a slip control agent and rub resistance agent. It is a synthetic wax compounded in refined linseed oil. It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersion. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention and rub resistance properties. It is a soft paste that can be easily handled or pumped and readily dispersed into ink compositions with minimum mixing. CeraSPERSE 171 can also be used in UV topcoats. Recommended dosage level is 5.0-8.0%. It meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180. CeraSPERSE 174 by Shamrock Technologies acts as a slip control- and rub resistance agent. It is synthetic wax and polytetrafluoroethylene (PTFE) compounded in refined linseed oil. It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersion. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention and rub resistance properties. It has a soft rheology, and will easily and uniformly disperse in lithographic compositions at any stage of the ink processing. CeraSPERSE 174 can also be used in UV topcoats. Recommended dosage level is 4.0-6.0%. It meets the requirements of 21 CFR 175.105, 175.300, 176.170 and 176.180. CeraSPERSE 442DV by Shamrock Technologies acts as a slip control- and abrasion resistance agent. It is a dark colored compound of wax and polytetrafluoroethylene (PTFE) in ink oil. It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), gloss retention and rub resistance properties. CeraSPERSE 442DV is used in heatset inks and offset inks. Recommended dosage level is 2.0-5.0%. CeraSPERSE UV 636 by Shamrock Technologies acts as a slip control agent and abrasion resistance agent. It is carnauba wax dispersed in the UV monomer TRPGDA. It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention, block and scuff resistance properties. CeraSPERSE UV 636 is used in UV topcoats. Recommended dosage level is 2-4%. It meets the requirements of 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180. CeraSPERSE UV 691 by Shamrock Technologies acts as a slip control agent and abrasion resistance agent. It is a high melting synthetic wax finely dispersed in the UV monomer TRPGDA. It is manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. Its compounds have a translucent appearance with a shiny gloss and a creamy feel. Provides slip (Low COF), clarity, gloss retention and abrasion resistance properties. CeraSPERSE UV 691 is used in UV topcoats. Recommended dosage level is 2-4%. CeraSPERSE 550FM by Shamrock Technologies is an ultrafine microcrystalline wax compound with polytetrafluoroethylene. Provides very good rub resistance, slip performance and gloss retention. CeraSPERSE 550FM is used in heat-set lithographic inks. CeraSPERSE CSP161 by Shamrock Technologies is polyethylene wax-based slip control agent. Provides very good rub resistance and slip performance. CeraSPERSE CSP161 is used in heatset inks. CeraSPERSE CSP164 by Shamrock Technologies acts as a slip control agent. It is a blend of polytetrafluoroethylene wax and polyethylene wax in vegetable oil. Provides good rub resistance and slip performance. CeraSPERSE CSP164 is used in sheetfed inks.
CeraSPERSE
Coating ingredients supplied by Shamrock Technologies