Return to supplier page
Omnivadd SB Flakes by IGM Resins is an organic filler and rheology modifier. For absorbent substrates, it can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate.<br>
<ul style="padding-left: 40px;"><li>It helps in enhancing higher gloss, increases color strength and improves cure.</li><li>It is used in wood, metal and plastic coatings.</li><li>It is applicable for flexographic, offset & screen inks and over print varnishes.</li><li>The recommended addition level is 0.25-2.5% by weight, based upon total solids.</li><li>Omnivadd SB Flakes has a shelf life of 24 months.</li></ul> Omnivadd MirroflexSB 50% by IGM Resins acts as a rheology modifier. It is a specifically designed for the energy curing coating and ink industry.<br>
<ul style="padding-left: 40px;"><li>It can be used in many applications where high gloss and flexibility are required.</li><li>It provides very good
resistance to ultraviolet light, good film hardness combined with good flexibility and moderate chemical resistance.</li><li>It improves the viscosity and stability of most UV systems.</li><li>It is used in metal, plastic, wood, clear & pigmented coatings and flexographic inks.</li><li>Omnivadd MirroflexSB 50% has a shelf life of 26 months.</li></ul> Omnivadd WF 3585 by IGM Resins is silicone-based slip and leveling agent. It provides powerful reduction in surface tension, which leads to excellent substrate wetting and anti-cratering properties.<br>
<ul style="padding-left: 40px;"><li>It offers better substrate wetting, no inter-coat adhesion problems in multi-layer applications and little or no foam stabilization.</li>
<li>It is recommended for use in all kinds of water-based coatings with a pH
range of 4-10.</li>
<li>It is especially suitable for solvent-free aqueous printing inks.</li>
<li>It is used in wood, metal, plastic coatings and electronics industry.</li>
<li>The dosage level of the grade is 0.2-2.0% on total formulation weight for coatings and printing inks.</li>
<li>Omnivadd WF 3585 has a shelf life of 5 years.</li></ul> Omnivadd XP 6215 by IGM Resins is a modern low molecular weight, anionic wetting and dispersing additive.<br>
<ul style="padding-left: 40px;"><li>It improves compatibility of all kinds of tinting pastes commonly used in the coating industry.</li>
<li>It stabilizes organic & inorganic pigments and extenders in solvent-free, water & solvent based systems.</li>
<li>It provides strong reduction of flooding & floating when pigment mixtures
are reduced.</li>
<li>It also increases storage stability of the system.</li>
<li>It is used in general industrial, automotive, wood, plastic, metal coatings and electronics applications.</li>
<li>It is recommended for all kinds of solvent-based coatings as well as pigment concentrates.</li>
<li>The dosage level of the grade is 5-10% for inorganic pigments, 10-20% for organic pigments, 3-5% for titanium dioxide and post-addition in bases: 0.5-1.5% on total base weight.</li>
<li>Omnivadd XP 6215 has a shelf life of 3 years.</li></ul> Omnivadd XP 6211 by IGM Resins is a modern low molecular weight, wetting and dispersing additive for solvent-based and solvent-free systems.<br>
<ul style="padding-left: 40px;"><li>It improves pigment wetting, reduce the dispersion time and increase gloss & flow.</li>
<li>It is suitable for stabilizing titanium dioxide and all kinds of extenders.</li>
<li>It is designed for coatings and composites.</li>
<li>It strongly reduces mill-base viscosity allowing high pigment and filler loading.</li>
<li>It is used in wood, plastic, metal coatings and electronics applications.</li>
<li>It is recommended for filled unsaturated polyester systems such as gelcoats or combination of polystyrene, polyvinylacetate and styrenebutadiene copolymers (e.g. LS- or LP-formulations).</li>
<li>The dosage level of the grade is 0.5-2.0% for titanium dioxide extenders.</li>
<li>The shelf life of the product is 5 years.</li></ul> Omnivadd EF 3077 by IGM Resins is a combination of surface-active wetting additives which is used mainly in water-based coating and ink industries which will give superwetting effect.<br>
<ul style="padding-left: 40px;"><li>It exhibits unique wetting and spreading properties and can also improve flow and levelling properties.</li><li>It is highly compatible with a wide variety of solvent-based and radiation-curable resin systems.</li><li>It makes very suitable for use in high gloss and clear systems.</li><li>It provides powerful reduction in surface tension, which leads to excellent anti-cratering properties.</li><li>It has no/or minimal negative effect on inter-coat adhesion.</li><li>Omnivadd EF 3077 has recommended dosage level is 0.1-1.0%.</li></ul> Omnivadd EF 3088 by IGM Resins is a silicone free, slip & levelling additive having high molecular weight and very broad compatibility.<br>
<ul style="padding-left: 40px;"><li>It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and levelling and prevent formation of craters without stabilizing foam.</li><li>It provides ‘long wave’ performance and increases gloss of the coating system and does not cause any inter-coat adhesion problems.</li><li>It is extremely suitable for use in clear coatings.</li><li>It prevents cratering and helps substrate wetting without damaging the inter-coat adhesion in multi-layer applications.</li><li>It is recommended for stoving enamels based on alkyd, acrylic & polyester resins, polyurethane coatings, two-pack epoxy compounds and air-dried alkyd systems.</li><li>It has recommended dosage level is 0.4-2.0% on total formulation weight.</li><li>Omnivadd EF 3088 has a shelf life of 3 years.</li></ul> Omnivadd SP 5135 by IGM Resins is a low molecular weight, wetting and dispersing agent for enhancing the dispersion of pigments and reducing the interfacial tension between pigments/extenders and the vehicle.<br>
<ul style="padding-left: 40px;"><li>It improves the wetting of pigment surfaces & organically treated bentonites and reduces the time required for the grinding process.</li>
<li>It creates thixotropy and prevents flooding, floating & settling of the pigments and reduces sagging.</li>
<li>It is especially suitable for non-polar to medium-polar solvent-based and
solvent-free coating systems such as air-drying alkyds, chlorinated polymers, epoxies and alkyd/amino resin combinations.</li>
<li>It is used in architectural paints and coatings.</li>
<li>The dosage level of the grade is 0.25-1.0% on inorganic pigments and 15-25% on the bentonites.</li>
<li>Omnivadd SP 5135 has a shelf life of 5 years.</li></ul> Omnivadd ED 2163 by IGM Resins is a silicone-free foam control additive. It can prevent foam and bubble formation during manufacture and application of coatings. It is recommended for polyurethane-based floorings and casting systems that are based on epoxy resins. The dosage level is 0.1-1.0% on total formulation weight. Omnivadd ED 2163 has a shelf life of 5 years. Omnivadd XP 5166 by IGM Resins is a low molecular weight, wetting and dispersing additive for solvent-based systems. It enhances the dispersion of inorganic pigments and stabilizes the suspension of special effect pigments. It is designed to prevent flooding & floating and hard sedimentation.<br>
<ul style="padding-left: 40px;"><li>It is suitable for medium-to high-polar systems such as nitrocellulose, alkyd/amino resin combinations, polyurethane & chlorinated polymer and acrylic polyisocyanate systems (two-pack acrylics).</li> <li>It prevents flooding of titanium dioxide in combination with other color pigments.</li><li>It is often used in conjunction with high molecular weight dispersants such as ADD-4046 as an effective co-grinding dispersant.</li><li>It improves dispersion or suspension stability and color strength.</li><li>It offers higher gloss or luster, lower viscosity or higher pigment loading.</li><li>It is very effective in stabilizing TiO2 and activating rheological modifiers such as bentonites and other activated fillers.</li><li>It is also effective with metallic flakes and special effect pigments.</li><li>It is used in flexographic & screen printing inks and coatings.</li><li>The recommended addition level is 1.0-5.0% on TiO2, 5.0-10.0% on bentonites/thickeners and 1.0-5.0% on metallic or special effect flakes.</li><li>Omnivadd XP 5166 has a shelf life of 5 years.</li></ul>
Omnivadd
Coating ingredients supplied by IGM Resins
89 Products match your search
Omnivadd SB Flakes
by IGM Resins
Omnivadd MirroflexSB 50%
by IGM Resins
Omnivadd WF 3585
by IGM Resins
Omnivadd XP 6215
by IGM Resins
- Sustainable option
Omnivadd XP 6211
by IGM Resins
Omnivadd EF 3077
by IGM Resins
Omnivadd EF 3088
by IGM Resins
Omnivadd SP 5135
by IGM Resins
- Sustainable option