Omnivadd SB Flakes by IGM Resins is an organic filler and rheology modifier. For absorbent substrates, it can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate.
- It helps in enhancing higher gloss, increases color strength and improves cure.
- It is used in wood, metal and plastic coatings.
- It is applicable for flexographic, offset & screen inks and over print varnishes.
- The recommended addition level is 0.25-2.5% by weight, based upon total solids.
- Omnivadd SB Flakes has a shelf life of 24 months.
Product family:
Product Type:
| CAS Number | Visible After Login |
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Omnivadd SB Flakes properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Acid Value | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Color, APHA | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hydroxyl Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Molecular Weight, Mw | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Toluene Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Turbidity | 0.0 Visible After Login | Visible After Login | Visible After Login |