Return to supplier page
Maxemul™ 7101 by Croda is a surfactant-based O/W emulsifier and dispersant. It provides superior colloidal stability in the resin emulsion. <br>
<ul style="padding-left: 40px;"><li> Offers the total elimination of solvents in alkyd-based coatings. </li>
<li> It can be indicated for long and medium oil alkyd emulsions with minimum impact on film properties. </li>
<li> Shows the non-migratory character from physical polymer entanglement and optimized formulations with excellent drying & dry film properties. </li>
Maxemul™ 7101 is compatible with alkyd polymeric systems. </li>
<li> Used in industrial-, decorative- and protective coatings. </li> </ul> Maxemul™ 6112/20 by Croda is copolymerizable anionic surfactant (20% in water). Also acts as an emulsifier. Used for superior emulsion stability in latex systems and very good moisture resistance. Used in graphics, inks, decorative, automotive, industrial, marine and protective coatings. Maxemul™ 9107 by Croda is a versatile polymeric non-ionic surfactant-based emulsifier for O/W epoxy emulsions. It brings excellent tropical storage stability and no negative effects on dry film properties. It increases the environmentally friendly profile and allowing to the formulation of VOC-free paints, coatings and composites.<br> <ul style="padding-left: 40px;"><li> It shows emulsions with excellent tropical storage stability and dry films with excellent chemical resistance & corrosion protection.</li> <li> It is compatible with epoxy polymeric systems.</li> <li> It is used in wall paints, industrial-, decorative-, floor- and metal protective coatings.</li> <li> Maxemul™ 9107 is listed in IECSC, REACH, ENCS, KECI, TSCA, EU 10/2011, FDA (Specific chapters) and FDA (175.105).</li> </ul> Maxemul™ 7201 by Croda is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibilizer. Maxemul™ 7201 is used in decorative coatings, automotive coatings, graphics, inks, industrial coatings, marine and protective coatings. Maxemul™ 6112 by Croda is an emulsifier. It is an anionic, co-polymerizable surfactant designed for use as a stabilizer in latex binders typically used in water-borne wall paints, wood & metal protection coatings. It is reactive towards vinylic unsaturated monomers. It enhances the colloidal stability of the latex and improves dry film with high water repellency & superior barrier properties. It shows effectiveness during particle nucleation and the growth stage. It is suitable in pigmented films with improved pigment binding properties. Maxemul™ 6112 is compatible with acrylic, vinylic and UV polymeric systems. It is used in inks, industrial-, decorative- and elastomeric roof coatings. Maxemul™ 5010 by Croda is an alkenyl functional non-ionic surfactant. Used in the production of waterborne polymer dispersions for protective paints and coatings and paper coatings. Provides improved resistance to flocculation, very good colloidal stability, protection from water, improved aesthetic properties, higher gloss and less tendency to whiten in humid conditions. Offers improved shear stability, very good freeze-thaw properties, improved rheology during formulation, and very good solvent resistance. Gives a reduction of coalescing solvent during film formation, no surfactant exudation over time, reduced water uptake, reduced blooming and superior water spot resistance in the film. Imparts efficient particle size control. Maxemul™ 5010 allows the formulation of anionically stabilized latices. Maxemul™ 5011 by Croda is an alkenyl functional non-ionic surfactant. Used in the production of waterborne polymer dispersions for protective paints and coatings and paper coatings. Provides improved resistance to flocculation, very good colloidal stability, protection from water, improved aesthetic properties, higher gloss and less tendency to whiten in humid conditions. Offers improved shear stability, very good freeze-thaw properties, improved rheology during formulation, and very good solvent resistance. Gives a reduction of coalescing solvent during film formation, no surfactant exudation over time, reduced water uptake, reduced blooming and superior water spot resistance in the film. Imparts efficient particle size control. Maxemul™ 5011 allows the formulation of anionically stabilized latices. Maxemul™ 7102 by Croda is a very versatile, polymeric non-ionic surfactant-based O/W emulsifier and dispersant agent providing superior colloidal stability. It is suitable for alkyd resin emulsification with minimum impact on film properties. It shows the total elimination of solvents in alkyd-based coatings. It can be indicated for medium and short oil alkyd emulsions. It shows the non-migratory character from physical polymer entanglement and optimized formulations with excellent drying & dry film properties. Maxemul™ 7102 is used in industrial-, decorative- and protective coatings. Maxemul™ 6106 by Croda is an emulsifier. It is an anionic, co-polymerizable surfactant designed for use as a stabilizer in latex binders typically used in waterborne wall paints, wood and metal protection coatings. It is reactive towards vinylic unsaturated monomers. It enhances the colloidal stability of the latex and improves dry film with high water repellency & superior barrier properties. It shows effectiveness during particle nucleation and the growth stage. It is suitable in pigmented films with improved pigment binding properties. Maxemul™ 6106 is compatible with acrylic, vinylic and UV polymeric systems. It is used in inks, industrial-, decorative- and elastomeric roof coatings.
Maxemul™
Coating ingredients supplied by Croda
9 Products match your search
Maxemul™ 7101
by Croda
Maxemul™ 6112/20
by Croda
Maxemul™ 9107
by Croda
- Sustainable option
Maxemul™ 7201
by Croda
Maxemul™ 6112
by Croda
Maxemul™ 5010
by Croda
Maxemul™ 5011
by Croda
Maxemul™ 7102
by Croda
Maxemul™ 6106
by Croda
Showper page