Return to supplier page
Curox® CATA-2000 by United Initiators is a hardener and initiator (radical source) in the curing of unsaturated polyester resins and vinyl ester resins.<br>
<ul style="padding-left: 40px;">
<li>It provides rapid curing performance, a good mold release factor, and an excellent degree of cure.</li>
<li>It is recommended for curing in closed molding techniques such as resin transfer molding (RTM) and wet press molding.</li>
<li>Curox® CATA-2000 has a shelf life of 6 months.</li>
</ul> Curox® M-100 by United Initiators is a hardener and initiator for curing of unsaturated polyester resins and vinyl ester resins.<br>
<ul style="padding-left: 40px;">
<li>It has phthalate plasticizer as a de-sensitizing agent.</li>
<li>It provides tension-free curing and moderate mold release time.</li>
<li>It is recommended for hand lay-up, spray lay-up, centrifugal casting, filament winding, and casting of resins.</li>
<li>Curox® M-100 has a shelf life of 6 months.</li>
</ul> Curox® M-402 by United Initiators is a hardener and initiator (radical source) for curing of unsaturated polyester resins.<br>
<ul style="padding-left: 40px;">
<li>It has aliphatic ester as a de-sensitizing agent.</li>
<li>It offers moderate evolution of heat, mold release factors, and a relatively long moderate mold release time.</li>
<li>It is recommended for continuous impregnation, centrifugal casting of button sheets, and articles that should not show discoloration.</li>
<li>Curox® M-402 has a shelf life of 6 months.</li>
</ul> Curox® CM-75R by United Initiators is a hardener and initiator for curing of unsaturated polyester resins, and vinyl ester resins.<br>
<ul style="padding-left: 40px;">
<li>It has dimethyl phthalate as a de-sensitizing agent.</li>
<li>It provides a good curing rate and longer gel time and gel-to-peak time in unsaturated polyester resins.</li>
<li>It is recommended for thicker laminates, vacuum infusion/plastic bag technology, curing of hand/spray-layup reinforced parts, filament winding, and resin transfer molding.</li>
<li>Curox® CM-75R has a shelf life of 6 months.</li>
</ul> Curox® SOLAR SC by United Initiators is a curing agent and polymerization initiator in the crosslinking of ethyl vinyl acetate (EVA) for photovoltaic.<br>
<ul style="padding-left: 40px;">
<li>It offers miscibility with other peroxides, easy dosing, a low hazen number, and high purity, avoiding any discoloration effect.</li>
<li>It provides long thermal stability and consistent qualities over an extended period.</li>
<li>It complies with the ElektroG (EU Directives: RoHS 2002/95/EG, WEEE 2002/96/EG).</li>
<li>It is suitable for thermoplastics. Curox® SOLAR SC has a shelf life of 12 months.</li>
</ul> Curox® M-403 by United Initiators is a hardener and radical initiator for curing of unsaturated polyester resins in combination with cobalt accelerators.<br>
<ul style="padding-left: 40px;">
<li>It has dimethyl phthalate as a de-sensitizing agent.</li>
<li>It offers moderate evolution of heat, relatively short mold release time, and higher reactivity in methyl ethyl ketone peroxide (MEKP) products.</li>
<li>It is recommended for hand lay-up, spray lay-up, centrifugal casting, filament winding, and casting of resins.</li>
<li>Curox® M-403 has a shelf life of 6 months.</li>
</ul> Curox® M-102R by United Initiators is a hardener and initiator for curing of unsaturated polyester resins.<br>
<ul style="padding-left: 40px;"><li>It has aliphatic ester as a de-sensitizing agent and lowest H<sub>2</sub>O<sub>2</sub> content.</li>
<li>It provides controlled homogenization in the resin and the disappearance of red color after curing.</li>
<li>It is recommended for curing molded parts like hand lamination, spray lay-up, centrifugal casting, filament winding, and casting of resins.</li>
<li>Curox® M-102R has a shelf life of 6 months.</li></ul> Curox® SOLAR FC1 by United Initiators is a curing agent and polymerization initiator in the crosslinking of ethyl vinyl acetate (EVA) for photovoltaic.<br>
<ul style="padding-left: 40px;">
<li>It offers miscibility with other peroxides, easy dosing, a low hazen number, and high purity, avoiding any discoloration effect.</li>
<li>It provides long thermal stability and consistent qualities over an extended period.</li>
<li>It complies with the ElektroG (EU Directives: RoHS 2002/95/EG, WEEE 2002/96/EG).</li>
<li>Curox® SOLAR FC1 has a shelf life of 6 months.</li>
</ul> Curox® CM-75 by United Initiators is a hardener and initiator for curing of unsaturated polyester resins, and vinyl ester resins.<br>
<ul style="padding-left: 40px;">
<li>It has dimethyl phthalate as a de-sensitizing agent.</li>
<li>It provides a good curing rate and longer gel time and gel-to-peak time in unsaturated polyester resins.</li>
<li>It is recommended for thicker laminates, vacuum infusion/plastic bag technology, curing of hand/spray-layup reinforced parts, filament winding, and resin transfer molding.</li>
<li>Curox® CM-75 has a shelf life of 6 months.</li>
</ul> Curox® M-102 by United Initiators is a hardener and initiator for curing of unsaturated polyester resins.<br>
<ul style="padding-left: 40px;">
<li>It has aliphatic ester as a de-sensitizing agent and the lowest H<sub>2</sub>O<sub>2</sub> content.</li>
<li>It is recommended for curing of molded parts, hand lamination, spray lay-up, centrifugal casting, filament winding, and casting of resins.</li>
<li>Curox® M-102 has a shelf life of 6 months.</li>
</ul>
Curox®
Polymer additives supplied by United Initiators
31 Products match your search
Curox® CATA-2000
by United Initiators
- Sustainable option
Curox® M-100
by United Initiators
- Sustainable option
Curox® M-402
by United Initiators
- Sustainable option
Curox® CM-75R
by United Initiators
- Sustainable option
Curox® SOLAR SC
by United Initiators
- Sustainable option
Curox® M-403
by United Initiators
- Sustainable option
Curox® M-102R
by United Initiators
- Sustainable option
Curox® SOLAR FC1
by United Initiators
- Sustainable option
Curox® CM-75
by United Initiators
- Sustainable option
Curox® M-102
by United Initiators
- Sustainable option