Supplier Page
TinToll (SINOPCC Group)
OverviewProducts60Brands3Products families4

PowerSorb™ (Polymer additives)

Supplied by TinToll (SINOPCC Group)

23 Products match your search

PowerSorb™ 1577

by TinToll (SINOPCC Group)

PowerSorb™ 1577 by TinToll (SINOPCC Group) is a low volatility, ultraviolet light absorber. It is a 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy]-phenol. It allows polycarbonate and polyesters to achieve a higher resistance to weathering than conventional UV absorber. PowerSorb™ 1577 shows good compatibility with polyolefins such as low and high-density polyethylene, olefin copolymers (EPR, EPDM, EVA), polypropylene, and other polymers including polyvinyl chloride, polyesters, natural & synthetic resins, polystyrene and ABS.
  • Sustainable option
See the product

PowerSorb™ 2908

by TinToll (SINOPCC Group)

PowerSorb™ 2908 by TinToll (SINOPCC Group) is a n-hexadecyl-3,5-di-tert-butyl-4-hydroxybenzoate. It is a non-discoloring light stabilizer. It functions by scavenging free radicals formed during the photo-degradation of plastic materials. It can be combined with hindered amine light stabilizers (HALS). It shows resistance to extraction. It shows good compatibility with polyolefin substrates. It is suitable for polypropylene, TPO thick-section parts, polyethylene (HDPE, LLDPE and LDPE) moldings, films and tapes. PowerSorb™ 2908 is FDA-approved.
See the product

PowerSorb™ 326

by TinToll (SINOPCC Group)

PowerSorb™ 326 by TinToll (PCC Group) is a 2-(2’-hydroxy-3’-t-butyl-5’-methylphenyl)-5-chlorobenzotriazole-based UV absorber. It imparts outstanding light stability and is available in pale yellow powder form. It is soluble in benzene, cyclohexane, ethyl acetate, n-hexane, methanol, dichloromethane and styrene. PowerSorb™ 326 is especially suitable for polyolefins and cold cured polyesters.
See the product

PowerSorb™ 3040

by TinToll (SINOPCC Group)

PowerSorb™ 3040 by TinToll (PCC Group) is a 2-hydroxy-4-methoxybenzophenone. It acts as an effective UV absorber. It exhibits good heat stability and is available in pale yellow colored powder form. It is soluble in benzene, ethyl acetate, methylene chloride, chlorobenzene and tetrachlororethane. PowerSorb™ 3040 is compatible with PVC, unsaturated polyester, acrylic, alkyd, cellulose nitrate and phenolic resins.
See the product

PowerSorb™ 1130

by TinToll (SINOPCC Group)

PowerSorb™ 1130 by TinToll (PCC Group) is a blend of a-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4hydroxyphenyl]-1-oxopropyl]-?- hydroxypoly(oxo-1,2-ethanediyl) (46-54%), a-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-?-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl] poly(oxy-1,2-ethanediyl) (36-41%)and polyethyleneglycol 300 (10.5-13.5%). It is a HALS and benzotriazole UV absorber.<br> <ul style="padding-left: 40px;"><li>It is soluble in butylcarbitol, hexane dioldiacrylate, trimethylol propane triacrylate and ethyl glycol.</li> <li>It provides efficient protection to light sensitive substrates.</li> <li>PowerSorb™ 1130 is suitable for plastic applications.</li></ul>
See the product

PowerSorb™ 3049

by TinToll (SINOPCC Group)

PowerSorb™ 3049 by TinToll (PCC Group) is an efficient UV absorber offering protection from premature damage. It is a 2,2-dihydroxy-4,4-dimethoxybenzophenone. It is available in pale yellow colored powder form. PowerSorb™ 3049 is suitable for polyester, allyl carbonate, cellulose nitrate, PUR system, polymer dispersions, rubber, acrylic, alkyd, epoxy and phenolic resins.
See the product

PowerSorb™ 329

by TinToll (SINOPCC Group)

PowerSorb™ 329 by TinToll (PCC Group) is a 2-(2'-hydroxy-5'-tert-octylphenyl) benzotriazole-based UV absorber. It imparts good light stability and prevents yellowing and degradation of polymers. It helps to preserve original appearance and physical integrity of molded articles, films, sheets and fibers during outdoor weathering. It is soluble in n-butanol, dioctyl phthalate, methyl cellosolve, n-heptane, methylene chloride, methyl methacrylate and styrene. It can be used in combination with phenolic & phosphite antioxidants and HALS to optimize performance. PowerSorb™ 329 is compatible with polycarbonate, unsaturated polyesters and acrylics.
See the product

PowerSorb™ 3638

by TinToll (SINOPCC Group)

PowerSorb™ 3638 by TinToll (PCC Group) acts as a highly efficient and non-staining UV absorber. It is a 2,2'-(1,4-phenylene)bis(4H-3,1-benzoxazin-4-one). It can be dissolved in PET resin to give a transparent appearance even with high dosage. PowerSorb™ 3638 is suitable for film, sheet, plate, solar cell, PET bottles, food wrap films and window film. It is FDA-approved.
See the product

PowerSorb™ 3030

by TinToll (SINOPCC Group)

PowerSorb™ 3030 by TinToll (PCC Group) is a UV absorber having maximal thermal stability and minimal volatility. It is a 1, 3-bis-[(2’-cyano-3’, 3’-diphenylacryloyl) oxy]-2, 2-bis-{[(2’-cyano- 3’, 3’-diphenylacryloyl) oxy] methyl}-propane. It offers good compatibility and excellent stabilizing effect. PowerSorb™ 3030 is suitable for stabilizing polycarbonates with high extrusion temperature.
See the product

PowerSorb™ 360

by TinToll (SINOPCC Group)

PowerSorb™ 360 by TinToll (PCC Group) is a 99% pure, low volatility UV absorber imparting outstanding light stability. It is a bis[2-Hydroxy-5-t-octyl-3-(benzotriazol-2-yl)phenyl]methane. It is suitable for high temperature and high loading polymers. PowerSorb™ 360 is compatible with acrylic resins, polyalkylene terephthalates, polycarbonates, modified polyphenylene ether or sulfide compounds, polyamides, polyacetals, polyolefins, styrenics, elastomers and high performance plastics.
  • Sustainable option
See the product
Showper page

Most Popular Brands

PowerNox™

by TinToll (SINOPCC Group)

25 products
See All Products

PowerSorb™

by TinToll (SINOPCC Group)

23 products
See All Products

PowerStab™

by TinToll (SINOPCC Group)

12 products
See All Products