Return to supplier page
HECO® FOAM 970 PO by HECOPLAST is a chemical, endothermic blowing and nucleating
agent. It is suitable for thermoplastic polymers, including polyethylene and polypropylene in injection molding. <br>
<ul style="padding-left: 40px;"><li>Recommended dosage level is 0.5-2.0% depending on the desired properties. </li>
<li>It complies with EU (regulation) No. 10/2011 and US-FDA. </li>
<li>HECO® FOAM 970 PO has a shelf life of 12 months.</li></ul> HECO® NUK 484 PP by HECOPLAST is a nucleating and demolding agent. It enhances the transparency of polypropylene (PP) with its homogeneous, fine crystalline structure and raises the polymer's crystallization temperature.<br>
<ul style="padding-left: 40px;"><li>It shortens cooling time, allowing parts to be demolded sooner and cycle time is improved, boosting productivity.</li>
<li>The built-in demolding aid makes the process easier and faster.</li>
<li>It is suitable for injection molding and extrusion.</li>
<li>It is added in the range of 1.5-4.0% depending on the desired properties.</li>
<li>HECO® NUK 484 PP is US FDA and EU (VO) No. 10/2011 certified and has shelf life of 12 months.</li></ul> HECO® STAT 290 by HECOPLAST is a long-term antistatic agent. It is suitable for polyvinyl chloride (PVC), polystyrene (PS), acrylonitrile butadiene styrene (ABS), polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), and polyoxymethylene (POM). <br>
<ul style="padding-left: 40px;"><li>It shows an excellent efficiency and a long lasting antistatic effect. </li>
<li>It is also suitable for processing thermoplastics and polar plastics such as PVC and styrenics. </li>
<li>It can be sprayed using a self-prepared aqueous solution during film production. </li>
<li>It complies with EU (VO) No. 10/2011 and US-FDA. </li>
<li>The recommended dosage is 1-3% depending on the desired properties. </li>
<li>HECO® STAT 290 has a shelf life of 12 months.</li></ul> HECO® FOAM 940 PE by HECOPLAST is a chemical, endothermic blowing and nucleating
agent. It is suitable for processing thermoplastic polymers in injection molding and extrusion. <br>
<ul style="padding-left: 40px;"><li>Recommended dosage level is 0.5-2.0% for extrusion (weight reduction), 0.2-0.5% for injection molded parts is 0.2-0.5% to avoid sink marks, 0.1-1.0% for cell regulation and nucleation.</li>
<li>It complies with EU (regulation) No. 10/2011 and US-FDA.</li>
<li>HECO® FOAM 940 PE has a shelf life of 12 months.</li> HECO® SLIP 103 PO by HECOPLAST is a slip, demolding and antistatic additive. It reduces the viscosity, increases the flow ability of the polymer melt and enhances the mold release properties.<br>
<ul style="padding-left: 40px;"><li>It migrates to the surface of the plastic during and after the production, which provides an anti-static effect.</li>
<li>It is suitable for processing various polymers such as polyolefins, polyamides, polyesters, polycarbonates and polyvinylchloride in injection molding and extrusion.</li>
<li>Recommended dosage level is 0.3-1.5% depending on the desired properties.</li>
<li>It complies with EU (VO) No. 10/2011 and US-FDA.</li>
<li>HECO® SLIP 103 PO has a shelf life of 12 months.</li></ul> HECO® SLIP 140 PO by HECOPLAST acts primarily as an internal slip agent. It is also used as demolding additive in non-polar plastics and lubricant by reducing the shear forces that occur. <br>
<ul style="padding-left: 40px;"><li>It migrates to the surface of the molded part and reduces adhesion to metal parts in plastics. </li>
<li>It is suitable for processing various polymers such as polyolefins, PP, PA, PS, polyester and POM in injection molding and extrusion. </li>
<li>Its recommended dosage is added in the range of 0.2–1.0% depending on the
desired properties. </li>
<li>Due to its high melting point, it is also suitable for applications where a certain temperature is to be expected. </li>
<li>It complies with EU (VO) No. 10/2011 and US-FDA. </li>
<li>HECO® SLIP 140 PO has a shelf life of 12 months.</li></ul> HECO® SLIP 114 PP by HECOPLAST is an external slip and anti-blocking agent. It migrates to the surface slowly and forms a durable oleaginous layer with good slip and anti-blocking properties.<br>
<ul style="padding-left: 40px;"><li>It reduces friction and adhesion of the mixture during the mixing process.</li>
<li>It is suitable for processing polypropylene in injection molding and extrusion.</li>
<li>It is added in the range of 1.5-4.0% depending on the desired properties.</li>
<li>HECO® SLIP 114 PP is approved by EU (VO) No. 10/2011 and US FDA.</li>
<li>It has shelf life of 12 months.</li></ul> HECO® STAT 231 PO by HECOPLAST is a long-term antistatic agent. It provides long-lasting antistatic performance. It creates a self-organizing, and dissipative structured layer that continues to discharge static. The recommended dosage level is 1.0% depending on the desired properties. HECO® STAT 231 PO is suitable for processing polyvinyl chloride (PVC), thermoplastic polyurethane (TPU), and thermoplastic elastomer (TPE). HECO® FOAM 940 S by HECOPLAST is a chemical, endothermic blowing and nucleating agent. It is suitable for processing thermoplastic polymers such as polystyrene in injection molding, extrusion and direct gassing. <br>
<ul style="padding-left: 40px;"><li>The recommended dosage level is 0.5-2.0% for extrusion (weight reduction), 0.2-0.5% for injection molded parts to avoid sink marks, 0.1-1.0% for cell regulation and nucleation. </li>
<li>HECO® FOAM 940 S complies with EU (regulation) No. 10/2011 and US-FDA. </li>
<li>It has a shelf life of 12 months.</li> HECO® CLEAN 4 PP by HECOPLAST acts as a slip agent with nucleation aid on a polypropylene carrier. It effectively dissolves and eliminates impurities, color pigments, deposits, burns, and material residues, then rinses away.<br>
<ul style="padding-left: 40px;"><li>It cleans thermoplastic processing equipment, including injection molding machines, extruders, blow molding machines, and tools. </li>
<li>It is suitable for polyethylene, polypropylene, PET, PVC and PA. </li>
<li>HECO® CLEAN 4 PP has a shelf life of 12 months. </li>
<li>It is US FDA and EU (VO) No. 10/2011 approved.</li></ul>
66 products
HECO®
Polymer additives supplied by HECOPLAST
66 Products match your search
HECO® FOAM 970 PO
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® NUK 484 PP
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® STAT 290
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® FOAM 940 PE
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® SLIP 103 PO
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® SLIP 140 PO
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® SLIP 114 PP
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® STAT 231 PO
by HECOPLAST
- Support available
- Original documents
HECO® FOAM 940 S
by HECOPLAST
- Sustainable option
- Support available
- Original documents
HECO® CLEAN 4 PP
by HECOPLAST
- Sustainable option
- Support available
- Original documents