Return to supplier page
EMULTROL DFM AFO-5 by Concentrol is an emulsion of hydrophobic substances in vegetable oils. Acts as a defoamer. Offers excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. EMULTROL DFM AFO-5 is specially formulated for use in textiles. Its long-term foam inhibition effect permits usage of a single dose, with no necessity for further additions. Recommended dosage ranges from 0.5 to 1.25%. EMULTROL DFM AFO-3 by Concentrol is an emulsion of hydrophobic components in paraffin-based mineral oil. Acts as a defoamer. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Offers excellent dispersion in foaming systems. EMULTROL DFM AFO-3 is specially formulated for use in textiles. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. Recommeded dosage ranges from 0.1 - 0.5% (exceptionally up to 0.8%) upon the total formulation. EMULTROL LBR-115-60 by Concentrol is a non-yellowing aqueous emulsion of polydimethylsiloxanes. Acts as a release agent, anti-adherent and lubricant. It does not contain alkyl phenol alkoxylates (APEO's). Oil phase is a medium viscosity fluid with non-permanent behavior. Exhibits excellent emulsion stability even after dilution (up to 50ºC), good freeze-thaw stability (5 cycles) and good surface wetting properties. The dried film offers water repellent properties. Is non-yellowing, reduces needle temperature, wear and thread breakage and provides a natural hand to fabric. EMULTROL LBR-115-60 by Concentrol is used in molding of rubber parts (shoes, tyres, mats), plastic parts, resin bonded sound proofing carpets, shell molds for metal casting, conveyor belts, presses for fired refractories and offset printing machine folding bars. Complies with Regulation (EC) 10/2011, on plastic materials and articles intended to come into contact with food. EMULTROL PS-350-35 by Concentrol is an aqueous emulsion of polydimethylsiloxane. Acts as a release agent, anti-adherent and lubricant. It does not contain alkyl phenol alkoxylates (APEO's). Oil phase is a medium viscosity fluid with non-permanent behavior. Exhibits good surface wetting properties and excellent emulsion stability even after dilution. The dried film offers water repellent properties. EMULTROL PS-350-35 by Concentrol is used in molding of rubber parts (shoes, tyres, mats), plastic parts, resin bonded sound proofing carpets, shell molds for metal casting, conveyor belts, presses for fired refractories and offset printing machine folding bars. EMULTROL FLM by Concentrol is a non-ionic natural fat emulsion. Acts as a lubricant. Provides treated surfaces a smooth, greasy touch and good slip properties. Dry film gives a soft, shiny appearance and lubricates treated surface. Can also be used as an emulsion for acrylic dispersions, in order to obtain a temporary removable effect. EMULTROL FLM is used in textiles and leather sector. EMULTROL PS-2470 by Concentrol is an aqueous emulsion of polydimethylsiloxanes. Acts as a release agent, anti-adherent and lubricant. It does not contain alkyl phenol alkoxylates (APEO's). Oil phase is a medium viscosity fluid with non-permanent behavior. Exhibits excellent emulsion stability even after dilution and good surface wetting properties. The dried film offers water repellent properties. EMULTROL PS-2470 is used in molding of rubber parts (shoes, tyres, mats), plastic parts, resin bonded sound proofing carpets, shell molds for metal casting, conveyor belts, presses for fired refractories and offset printing machine folding bars. Complies with FDA regulations. <b>EMULTROL DFM AFO-7</b> by <b>Concentrol</b> is a mineral oil-free emulsion of hydrocarbon fluids and surfactants. Acts as a defoamer. Offers excellent dispersion in foaming systems. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols ethoxylates. <b>EMULTROL DFM AFO-7</b> by <b>Concentrol</b> is specially formulated for use in textiles. Its long term foam inhibition effect permits usage of low dosages. Recommeded dosage ranges from 0.25 - 1.25% upon total formulation. EMULTROL EPH-35 by Concentrol is a non-ionic - anionic polyethylene wax emulsion. Exhibits high harness and solidification point. Once applied, gives the treated surface a slippery effect and improves abrasion resistance. EMULTROL EPH-35 by Concentrol is used in tanning & leather treatment and textile industry. <b>EMULTROL DFM AFO-6</b> by <b>Concentrol</b> is an emulsion of hydrophobic components in paraffin-based mineral oil. Acts as a defoamer. Offers excellent dispersion in foaming systems. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. <b>EMULTROL DFM AFO-6</b> by <b>Concentrol</b> is specially formulated for use in textiles. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. Recommeded dosage ranges from 0.25 - 1.25% upon the total formulation. <b>EMULTROL CM-2358 PT</b> by <b>Concentrol</b> is a paraffin emulsion. Acts as a slip/anti-blocking agent. Provides treated surfaces sliding, anti-blocking, waterproofing and anti-adherent properties. Non ionic-anionic character in the case of paper treatment, gives an excellent compatibility with the materials which make up stucco and also assures a firm attachment to the substrate cellulosic base. <b>EMULTROL CM-2358 PT</b> by <b>Concentrol</b> is specially recommended for the treatment of cellulose, impregnation of paper & cardboard, waterproofing of
agglomerated panels and plaster sheets.
EMULTROL
Polymer additives supplied by Concentrol
13 Products match your search
EMULTROL DFM AFO-5
by Concentrol
EMULTROL DFM AFO-3
by Concentrol
EMULTROL LBR-115-60
by Concentrol
EMULTROL PS-350-35
by Concentrol
EMULTROL FLM
by Concentrol
EMULTROL PS-2470
by Concentrol
- Sustainable option