PFAS-free
67 products found
CHARGUARD™ 2000
by Elementis
CHARGUARD™ 2000 by Elementis is an organically modified mineral thickener. It is suitable for suitable for compounding in combination with fire retardants in low to intermediate polarity thermoplastic resin systems. It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).
- It enhances the effectiveness of non-halogenated and halogenated fire retardants by delaying the combustion process and stopping the spread of molten flame drip.
- It creates char layer oxygen barrier which is non-flammable and reduces the availability of combustible gases generated during thermal decomposition.
- It reduces the amount of smoke produced in a fire, which is a significant factor in improving fire safety and survivability.
- It is suitable for halogen-free flame retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
- Recommended dosage level is 3.5%-5% as supplied based on total formulation weight.
- CHARGUARD™ 2000 has a shelf life of 4 years.
- Sustainable option
- Support available
- Original documents
CHARGUARD™ 2010
by Elementis
CHARGUARD™ 2010 by Elementis is an organically modified special lamellar silicate used as a flame-retardant synergist. It improves the mechanical properties of thermoplastic materials.
- It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).
- Enhances gas barrier and reduces heat release rate to achieve the synergistic effect of flame retardant.
- Its unique functional groups strengthen the inorganic structure, increases char formation efficiency, enhances the density & strength of carbon layer and inhibit dripping.
- It lowers aluminum hydroxide and magnesium dosage in polymers.
- It is suitable for halogen-free flame-retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
- Recommended dosage level is 1%-5% as supplied based on total formulation weight.
- It is suitable for automotive, household, recycled and flame-retardant plastic applications.
- CHARGUARD™ 2010 has a shelf life of 4 years.
- It is ISO 9001 certified.
- Complies with USA (TSCA), EU (EINECS), Canada (DSL), Japan (ENCS), Philippines (PICCS), Korea (KECL), China (IECSC), Australia (AICIS), New Zealand (NZIoC) and Taiwan (TCSI)
- Recently launched
- Sustainable option
- Support available
- Original documents
CHARGUARD™ 1000
by Elementis
CHARGUARD™ 1000 by Elementis is an off-white organically modified mineral thickener. It is suitable for thermoplastic melt extrusion compounding applications in combination with non-halogenated fire retardants. It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).
- It enhances the effectiveness of non-halogenated and halogenated fire retardants by delaying the combustion process and stopping the spread of molten flame drip.
- It creates char layer oxygen barrier which is non-flammable and reduces the availability of combustible gases generated during thermal decomposition.
- It reduces the amount of smoke produced in a fire, which is a significant factor in improving fire safety and survivability.
- It is suitable for halogen-free flame retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
- Recommended dosage level is 3.5%-5% as supplied based on total formulation weight.
- CHARGUARD™ 1000 has a shelf life of 4 years.
- Sustainable option
- Support available
- Original documents
Silquest™ PA-1
by Momentive Performance Materials
Silquest™ PA-1 by Momentive Performance Materials is a PFAS-Free polymer processing aid. At low dosage levels, it can enhance material processability, reduce die pressure, die build up and die drool. It also increases material throughput without negatively impacting the final article.
- Improves processability of polyolefin resins (LLDPE, LDPE, HDPE, PP) and is easily & accurately metered in open or closed systems.
- Widely accepted for use in polyolefin film applications that involve food contact.
- Effective at low dosages and can eliminate the need for metal stearates.
- Offers no residue buildup or accumulation of processing aid on metal surfaces.
- Eliminates melt fracture during blown film processing while maintaining excellent film surface characteristics.
- Reduces scrap rate and is effective with many HMW-HDPE products that are difficult to use.
- Provides printability with no adverse effect on ink adhesion, heat sealing or film blocking.
- Silquest™ PA-1 is versatile, can be used as a liquid additive, as a solid formulated into a carrier resin (in masterbatches), or as an ingredient in multi-component additive package.
- Sustainable option
- Original documents
DoverClear™
by Dover Chemical (ICC Industries)
DoverClear™ by Dover Chemical (ICC Industries) are PFAS-free and siloxane-free polymer processing aids for polyethylene sheet and film applications. They are available in a wide variety of forms, which can be custom tailored to individual lines, depending on need. They can clear melt fracture as well or better than fluoropolymers without sacrificing throughput due to over-lubrication.
- They are used to improve the surface of the polymer.
- DoverClear™ are suitable for both metallocene & ziegler-natta catalyzed PE films and across a wide-range of melt-indexes.
- They are FDA approved.
- Sustainable option
- Support available
IP1172
by Ingenia
IP1172 by Ingenia is a non-PFAS polymer processing aid (PPA) masterbatch in LLDPE carrier resin. It is designed to eliminate melt fracture, minimize die buildup, and improve processing for polyolefin formulations.
- It is suitable for LDPE, LLDPE & HDPE blown & cast film, extrusion coating/laminating, sheet extrusion and molding applications.
- It uses a non-fluorinated process aid and is not formulated with any per- or polyfluoroalkyl substances (Non-PFAS).
- It provides exceptional PPA performance without environmental and toxicological concerns.
- IP1172 has broad regulatory approval for use in food packaging films and is highly efficient in removing sharkskin melt fracture and reducing die buildup.
- The recommended usage level of IP1172 is 1-2.5%.
- Sustainable option
- Support available
- Original documents
IP1171
by Ingenia
IP1171 by Ingenia is a non-PFAS polymer processing aid (PPA) masterbatch in LLDPE carrier resin. It is used to eliminate melt fracture, lower back pressure, improve throughput and processing in polyolefin formulations. It reduces die lip build-up while maintaining high clarity, impact strength, coefficient of friction and sealant properties, with minimal impact on film haze.
- It is suitable for LDPE, LLDPE & HDPE blown & cast film, extrusion coating/laminating, sheet extrusion and molding applications.
- It uses a non-fluorinated process aid and is not formulated with any per- or polyfluoroalkyl substances (Non-PFAS).
- It provides exceptional PPA performance without environmental and toxicological concerns.
- IP1171 has broad regulatory approval for use in food packaging films and is highly efficient in removing sharkskin melt fracture.
- The recommended dosage level is 1-2.5%.
- Sustainable option
- Support available
- Original documents
bFI A 3745
by Polytives
bFI A 3745 by Polytives is a polymeric processing aid, adhesion promoter and compatibilizing coupling agent. It is a flow improver developed to reduce the melt viscosity of various polymers including PMMA and further polymer systems thereby increasing the process efficiency. It allows for a significant reduction in processing temperatures by 5 to 10% at very low dosages.
- It is pure, transparent and is characterized by a high compatibility and miscibility in the polymer.
- It is suitable for prime and recycling grades thermoplastics such as PC, PS, PA, PBT, PET, PET-G, PC-ABS, SAN, TPU, TPE, PUR, PVC, PLA, rubber, polymer modification and polymer conversion.
- Recommended dosage level is 1-10%.
- Shelf life of bFI A 3745 is 12 months at room temperature.
- Sustainable option
IP1173
by Ingenia
IP1173 by Ingenia is a non-PFAS polymer processing aid (PPA) masterbatch in LLDPE carrier resin. It is designed to eliminate melt fracture, minimize die buildup, and improve processing for polyolefin formulations.
- It is suitable for LDPE, LLDPE & HDPE blown & cast film, extrusion coating/laminating, sheet extrusion and molding applications.
- It uses a non-fluorinated process aid and is not formulated with any per- or polyfluoroalkyl substances (Non-PFAS).
- It provides exceptional PPA performance without environmental and toxicological concerns.
- IP1173 has broad regulatory approval for use (including Japan) in food packaging films and is efficient in removing sharkskin melt fracture.
- The recommended usage level of IP1173 is 1-2.5%.
- Sustainable option
- Support available
- Original documents
Mevopur™ Healthcare Functional Additives
by Avient (Formerly PolyOne)
Mevopur™ Healthcare Functional Additives by Avient (Formerly PolyOne) are non-PFAs additives that protect and enhance the performance of the polymers used in medical devices, diagnostics and pharmaceutical packaging. They cover a wide range of functionalities such as friction reduction, gamma sterilization protection, UV protection for transparent packaging, radiopacity, reduction of static build-up, low retention properties, and clarifying of transparent applications. These are formulated without animal derived substances.
- They are suitable for wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM.
- They are used in vials, bottles, closure systems, films and combination devices.
- Mevopur™ Healthcare Functional Additives are fully supported by regulatory testing to USP, EP and ISO standards and manufactured under EN:ISO13485 protocols.
- Recently launched
- Sustainable option
