XIAMETER™ MEM-0024 Emulsion by Dow is a general purpose mold release agent. It contains 35% dimethyl polysiloxane fluid. This non-ionic, stable, water-dilutable emulsion produces a slippery film upon water evaporation of the product. XIAMETER™ MEM-0024 Emulsion is applied by spraying, dipping, wiping and brushing. It is used for plastic cutlery & cups. It complies with certain FDA regulations.
Product family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
XIAMETER™ MEM-0024 Emulsion properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Active Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Boiling Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point, Closed Cup | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Non-volatile Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |