Polymer additives for Blown Film Extrusion

IP1212 by Ingenia is an anti-static agent. It is a proprietary compound of a high-purity antistatic agent in a linear low-density polyethylene (LLDPE) carrier resin. It serves as an internal additive to control the surface resistivity on film over an extended period of time, effectively reducing static cling and dust accumulation. It contains no animal-based ingredients.

• It offers excellent thermal stability and allows for longlasting reduction in the surface resistivity due to the controlled migration of the antistatic agent to the surface of the film.
• It is suitable for injection molding, blow molding, blown film-, cast film-, and sheet extrusion applications.
• It is used in LDPE, HDPE and PP film and molding applications.
• Recommended usage level of IP1212 is 1-2%.
• It may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

IP1211 by Ingenia is an antistatic and slip masterbatch. It is a proprietary compound of high purity glycerol monostearate (GMS) and erucamide in an LLDPE carrier resin. It is used as an internal additive to control surface resistivity on the surface of the film over an extended period of time, effectively reducing static cling and minimizing dust accumulation.

• The slip agent in the formulation causes a reduction in coefficient of friction occurs slowly after extrusion and lasts for a considerable length of time, as the erucamide will slowly but continuously migrate to the surface to replace the amount lost from the surface.
• It is designed for blown and cast film, LDPE, LLDPE and HDPE film applications.
• It does not require dispersion aids, waxes or stearates.
• IP1211 may be used to meet the requirements of Title 21 of the U.S. Federal Code of Regulations and CONEG.

IP1210 by Ingenia is an antistatic agent. It is a proprietary compound of high purity glycerol monostearate (GMS) in an LLDPE carrier resin. It as an internal additive to control resistivity on the film surface over an extended period of time, resulting in less static cling and dust contamination of the film.

• It exhibits excellent thermal stability and a long lasting reduction in the surface resistivity due to the controlled migration of the antistatic agent to the surface of the film.
• It is suitable for injection molding, blow molding, blown film-, cast film-, and sheet extrusion applications.
• It is used in the production of LDPE, HDPE and PP films.
• It contains no animal-based ingredients and has no dispersion aids, waxes or stearates.
• Recommended usage level of IP1210 is 1-2%.
• It may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

ITZ-458 by Ingenia is a UV masterbatch. It contains an optimized blend of high-performance stabilization additives in an LLDPE carrier resin with good chemical resistance. It enhances the performance of agricultural films during outdoor exposure, even when exposed to aggressive agrochemicals such as pesticides, insecticides and soil disinfectants.

• It is designed for blown- and cast film, sheet extrusion and film coating.
• It is free of animal-based ingredients.
• It is recommended for agricultural applications such as greenhouse film, mulch film, tunnels, geotextiles, silage wrap, shade cloth, bale wrap and shrouds.
• It is suitable for LDPE, LLDPE and HDPE film applications.
• ITZ-458 may be used to meet the requirements of CONEG.

ITZ-380 by Ingenia is a short term antistatic masterbatch providing quick as well as long term antistatic action. It is a proprietary blend of high purity antistatic agents dispersed in a linear low-density polyethylene (LLDPE) carrier resin. It reduces surface resistivity and results in less static cling and dust contamination of the part surface. It offers excellent thermal stability and due to the controlled migration of the antistatic agent to the surface of the part, allows for long lasting reduction in the surface resistivity.

• It has fast-acting surface migratory effect, which supports demolding.
• It can be used in polyolefin film and rigid applications.
• It is suitable for injection molding, blow molding, blown film-, cast film-, and sheet extrusion applications.
• ITZ-380 may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

ITZ-446 by Ingenia is a proprietary compound of high purity antistatic agent in an LLDPE carrier resin. It is used as an internal additive to control resistivity on the film surface over an extended period of time, enabling antistatic properties. It contains no animal-based ingredients.

• It offers excellent thermal stability and long-lasting reduction in the surface resistivity due to the controlled migration of the antistatic agent to the film surface.
• It is suitable for injection molding, blow molding, blown film-, cast film-, and sheet extrusion.
• It is used in the production of LDPE, LLDPE, HDPE and PP films.
• ITZ-446 may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

IP135701 by Ingenia is a UV masterbatch. It is a compound of high-performance hindered amine light stabilizers (HALS) in LLDPE carrier resin. It is effective at low concentrations, offering reduced volatility and high temperature stability. The hindered amine stabilizers regenerate themselves, providing long-lasting UV stabilization.

• IP135701 is recommended for LDPE, LLDPE and HDPE film applications.
• It is free of animal-based ingredients.
• IP135701 is suitable for blown- and cast film and sheet extrusion.
• It may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

IP1355 by Ingenia is a UV/antioxidant masterbatch in an LLDPE carrier resin. It contains hindered amine light stabilizers (HALS) which regenerate themselves, providing long-lasting UV stabilization. It is effective at low concentrations, offering superior resistance to discoloration caused by gas fading.

• It is free of animal-based ingredients, dispersion aids, waxes and stearates.
• It is recommended for LDPE, LLDPE and HDPE film applications.
• IP1355 is suitable for blown- and cast film, general- and sheet extrusion.
• It may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

INCIRCLE® IP1610 by Ingenia is a polymer modifier masterbatch. It is designed for modifying 100% LLDPE to provide similar heat shrink performance of LDPE/LLDPE blends, without sacrificing the mechanical properties. In combination with LLDPE, it offers improved bubble stability.

• It is recommended for blown- and cast film applications.
• It is free of animal-based ingredients.
• INCIRCLE® IP1610 meets the requirements of Title 21 of the U.S. FDA and CONEG.

IP1300 by Ingenia is a UV anti-block polyethylene masterbatch. It contains 50% anti-block and high loading of hindered amine light stabilizer (HALS). It is designed for lawn, garden and industrial materials packaging in FFS bags. It is also used in other outdoor applications.

• It is free of animal-based ingredients.
• It is suitable for blown- and cast film, sheet extrusion and film coating.
• It is recommended for LDPE, LLDPE and HDPE film applications.
• IP1300 may be used to meet the requirements of CONEG.