Return to supplier page
TERRAMAC® TE-1030 by Unitika is a high impact, biodegradable, plant-based polylactic acid (PLA) grade. Exhibits antimicrobial properties, low amount of CO<sub>2</sub> emission than common plastics, low combustibility and no emission of toxic gas (such as dioxins, hydrogen chloride, NOx, or Sox). It can be processed using injection molding. Suitable for smaller goods, containers, various plastic parts, etc. Complies with Food Hygiene Law standards(Notification No.370 of the Ministry of Health, Labor and Welfare, Japan), Japan Biomass Plastics Association's Certification System for Biodegradable Plastics (GreenPla) Products (Entry on the Society's positive list and acquisition of GreenPla certification mark and labeling), Japan Biomass Plastics Association's Certification System for Biomass-based Plastics (BiomassPla) Products and Japan Organic Recycling Association's Biomass Mark Certification System for Biomass-based Products. TERRAMAC® TE-1030 also complies with biodegradability compliance (JIS K6953 (ISO 14855)). TERRAMAC® TE-7307 by Unitika is a biodegradable, plant-based polylactic acid (PLA) grade. Exhibits high heat resistance, high rigidity, antimicrobial properties, low amount of CO<sub>2</sub> emission than common plastics, low combustibility and no emission of toxic gas (such as dioxins, hydrogen chloride, NOx, or Sox). It can be processed using injection molding. Suitable for containers, table wear, chassis, etc. Complies with Food Hygiene Law standards(Notification No.370 of the Ministry of Health, Labor and Welfare, Japan), Japan Biomass Plastics Association's Certification System for Biodegradable Plastics (GreenPla) Products (Entry on the Society's positive list and acquisition of GreenPla certification mark and labeling), Japan Biomass Plastics Association's Certification System for Biomass-based Plastics (BiomassPla) Products and Japan Organic Recycling Association's Biomass Mark Certification System for Biomass-based Products. TERRAMAC® TE-7307 also complies with biodegradability compliance (JIS K6953 (ISO 14855)). TERRAMAC® TP-4030 by Unitika is a biodegradable, plant-based, high impact polylactic acid (PLA) grade. Exhibits improved melt properties, antimicrobial properties, low amount of CO<sub>2</sub> emission than common plastics, low combustibility and no emission of toxic gas (such as dioxins, hydrogen chloride, NOx, or Sox). It can be processed using extrusion, blow molding and foaming. Suitable for containers, bottles, pipes, foam sheet, etc. Complies with Food Hygiene Law standards(Notification No.370 of the Ministry of Health, Labor and Welfare, Japan), Japan Biomass Plastics Association's Certification System for Biodegradable Plastics (GreenPla) Products (Entry on the Society's positive list and acquisition of GreenPla certification mark and labeling), Japan Biomass Plastics Association's Certification System for Biomass-based Plastics (BiomassPla) Products and Japan Organic Recycling Association's Biomass Mark Certification System for Biomass-based Products. TERRAMAC® TP-4030 also complies with biodegradability compliance (JIS K6953 (ISO 14855)). TERRAMAC® TDA-8070M by Unitika is a highly durable polylactic acid alloy by Unitika. Exhibits low carbon dioxide emission, antibacterial properties and low level of combustibility. Applicable for injection molding processing. It is approved under US FDA Notification No. 178. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). TERRAMAC® TDA-8070M is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TE-1070 by Unitika is a flexible, high flow, biodegradable, plant-based polylactic acid (PLA) grade. Exhibits antimicrobial properties, low amount of CO<sub>2</sub> emission than common plastics, low combustibility and no emission of toxic gas (such as dioxins, hydrogen chloride, NOx, or Sox). It can be processed using injection molding. Suitable for smaller goods, containers, various plastic parts, etc. Complies with Food Hygiene Law standards(Notification No.370 of the Ministry of Health, Labor and Welfare, Japan), Japan Biomass Plastics Association's Certification System for Biodegradable Plastics (GreenPla) Products (Entry on the Society's positive list and acquisition of GreenPla certification mark and labeling), Japan Biomass Plastics Association's Certification System for Biomass-based Plastics (BiomassPla) Products and Japan Organic Recycling Association's Biomass Mark Certification System for Biomass-based Products. TERRAMAC® TE-1070 also complies with biodegradability compliance (JIS K6953 (ISO 14855)). TERRAMAC® TE-8005M by Unitika is a highly impact resistant, antibacterial polylactic acid resin by Unitika. Exhibits low carbon dioxide emission, high heat resistance and low level of combustibility. Designed for containers, table wear and chassis. Possesses high durability and high rigidity. Applicable for injection molding processing. It is approved under US FDA Notification No. 178. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). TERRAMAC® TE-8005M is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TCA-8070MN by Unitika is a flame resistant polylactic acid alloy. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). Applicable for injection molding processing. Exhibits low carbon dioxide emission, antibacterial properties, high durability and low level of combustibility. It is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TCA-8070MN is approved under US FDA Notification No. 178. TERRAMAC® TE-8003G30 by Unitika is polylactic acid resin having antibacterial properties. Exhibits low carbon dioxide emission, high heat resistance and low level of combustibility. Designed for containers, table wear and chassis. Possesses high durability and high rigidity. Applicable for injection molding processing. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). It is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TE-8003G30 is approved under US FDA Notification No. 178. TERRAMAC® TE-8005MT9 by Unitika is polylactic acid resin by Unitika. Designed for containers, table wear and chassis. Exhibits low carbon dioxide emission, high heat & impact resistance and low level of combustibility. Possesses antibacterial properties, high durability and high rigidity. Applicable for injection molding processing. It is approved under US FDA Notification No. 178. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). TERRAMAC® TE-8005MT9 is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TP-4000 by Unitika is a biodegradable, plant-based polylactic acid (PLA) grade. Exhibits improved melt properties, antimicrobial properties, low amount of CO<sub>2</sub> emission than common plastics, low combustibility and no emission of toxic gas (such as dioxins, hydrogen chloride, NOx, or Sox). It can be processed using extrusion, blow molding and foaming. Suitable for containers, bottles, pipes, foam sheet, etc. Complies with Food Hygiene Law standards(Notification No.370 of the Ministry of Health, Labor and Welfare, Japan), Japan Biomass Plastics Association's Certification System for Biodegradable Plastics (GreenPla) Products (Entry on the Society's positive list and acquisition of GreenPla certification mark and labeling), Japan Biomass Plastics Association's Certification System for Biomass-based Plastics (BiomassPla) Products and Japan Organic Recycling Association's Biomass Mark Certification System for Biomass-based Products. TERRAMAC® TP-4000 also complies with biodegradability compliance (JIS K6953 (ISO 14855)).
TERRAMAC®
Plastics and elastomers supplied by Unitika