TERRAMAC® TE-8003G30 by Unitika is polylactic acid resin having antibacterial properties. Exhibits low carbon dioxide emission, high heat resistance and low level of combustibility. Designed for containers, table wear and chassis. Possesses high durability and high rigidity. Applicable for injection molding processing. Complies with Food Hygiene Law standards (Notification No.370 of the Ministry of Health, Labour and Welfare, Japan). It is also listed with the Japan Hygienic Olefin And Styrene Plastics Association. TERRAMAC® TE-8003G30 is approved under US FDA Notification No. 178.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
TERRAMAC® TE-8003G30 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
TERRAMAC® TE-8003G30 Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Limit Temperature | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cylinder Front Temperature | Visible After Login | Visible After Login | |
| Cylinder Middle Temperature | Visible After Login | Visible After Login | |
| Cylinder Rear Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |