Return to supplier page
Alkatuff® LL525 is a hexene LLDPE copolymer designed for high quality cast film applications. It is formulated with stabilization additives, but contains no other additives. Shows incompatiblity to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Recommended for nappy film and bubble wrap applications. Complies with Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff LL711UV is a hexene LLDPE material specifically designed for rotational molding applications. Shows excellent stress crack resistance (ESCR), chemical resistance, stiffness, toughness and incompatibility to strong oxidizing agents. It also contains UV light stabilizers. Used in chemical and water tanks. Complies with the base resin requirements of AS/NZS 4766 Polyethylene storage tanks for water and chemicals, Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL710UV is a hexene LLDPE material specifically designed for rotational molding applications and high speed extrusion processes. Shows excellent stress crack resistance (ESCR), chemical resistance, good surface appearance, toughness and incompatibility to strong oxidizing agents. It also contains UV light stabilizers. Used in a wide variety of consumer goods and playground equipment. Complies Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL438 is a high performance hexene LLDPE copolymer specifically designed for film extrusion applications. It is formulated with process aid and a process stabilization package but contains no slip or anti-blocking additives. Shows excellent toughness, enhanced sealing characteristics and incompatibility to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Used in applications such as lamination and form, fill and seal films. Recommended for heavy duty and low temperature applications. Complies with Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL705UV is a hexene LLDPE material specifically designed for rotational molding applications. Shows excellent stress crack resistance (ESCR), chemical resistance, stiffness, toughness and incompatibility to strong oxidizing agents. Used in water and agricultural tanks, leisure craft, canoes and playground equipment. It also contains UV light stabilizers. Complies with the base resin requirements of AS/NZS 4766 Polyethylene storage tanks for water and chemicals, Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL501 is a hexene LLDPE copolymer designed for a variety of general purpose film extrusion applications. It is formulated with a process stabilization package but contains no slip or antiblocking additives. Shows high stiffness which improves film handling in converting and packaging operations. Is incompatible to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Used in industrial, agricultural, heavy duty films and in blending applications. Complies with Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL820 is a hexene LLDPE material specifically designed for rotational molding applications. Shows excellent stress crack resistance (ESCR), chemical resistance, stiffness, toughness and incompatibility to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Main applications include water and agricultural tanks, leisure craft, canoes and playground equipment. Alkatuff® LL601 is a hexene LLDPE copolymer designed for a variety of general purpose film applications requiring a good balance between stiffness and toughness. It is formulated with process stabilization, antiblocking and high slip additives. Shows high stiffness which improves film handling in converting and packaging operations. Is incompatible to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Used in liners, bags, sacks, industrial films, agricultural films and in blending applications. Complies with Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL755 is a hexene LLDPE material specifically designed for rotational molding applications. Shows excellent stress crack resistance (ESCR), chemical resistance, stiffness, toughness and incompatibility to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Used in water and agricultural tanks, leisure craft, canoes and playground equipment. Complies with the non UV base resin requirements of AS/NZS 4766 Polyethylene storage tanks for water and chemicals, Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). Alkatuff® LL488 is a high performance hexene LLDPE copolymer specifically designed for film extrusion applications. It is formulated with process aid, process stabilization, antiblocking and high slip additives. Shows excellent toughness, enhanced sealing characteristics and incompatibility to strong oxidizing agents. It does not contain UV stabilizers and therefore an appropriate UV stabilization package should be added for use in outdoor applications. Used in applications such as lamination and form, fill and seal films. Recommended for heavy duty and low temperature applications. Complies with Commission Regulation (EU) No 10/2011 and meets the requirements of FDA 21 CFR 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a).
Alkatuff®
Plastics and elastomers supplied by Qenos