Return to supplier page
PENTAMID® A GV15 MK15 H black by Pentac Polymer is a black colored polyamide (PA) 6.6 reinforced with 15% glass fiber and 15% mineral. Is heat stabilised, water insoluble and shows an isotropic shrinkage behavior. Exhibits normal viscosity, good hardness, stiffness, abrasion-, heat-, hot water and solvent resistance. Possesses good dimensional stability, surface finish, mechanical strength, toughness and low creep tendency. PENTAMID® A GV15 MK15 H black is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers, door handles and automotive applications including fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A GV30 HYD blue 5017/1 by Pentac Polymer is a blue colored, 30% glass fiber reinforced polyamide (PA) 6.6 with special coloration. Is heat-, hydrolysis stabilised and possesses improved dimensional stability, surface quality, good hardness, stiffness, mechanical strength, toughness and low creep tendency. Exhibits normal viscosity, water insolubility, good abrasion-, heat-, hot water and solvent resistance. PENTAMID® A GV30 HYD blue 5017/1 is suitable for processing by injection molding. Recommended for automotive applications including fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® A GV30 HYD2 RC black by Pentac Polymer is a black colored, 30% glass fiber reinforced polyamide (PA) 6.6 grade. Is heat-, hydrolysis stabilised, recompound/ recyclate material and possesses improved dimensional stability, surface quality, good hardness, stiffness, mechanical strength, toughness and low creep tendency. Exhibits normal viscosity, water insolubility, good abrasion-, heat-, hot water and solvent resistance. PENTAMID® A GV30 HYD2 RC black is suitable for processing by injection molding. Recommended for automotive applications including fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® A GK40 H black by Pentac Polymer is a black colored, water insoluble polyamide (PA) 6.6 reinforced with 40% glass bead. Is heat stabilised and shows an isotropic shrinkage behavior. Exhibits normal viscosity, good dimensional stability, surface finish, hardness, stiffness, good abrasion and heat resistance. PENTAMID® A GK40 H black is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers and door handles. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A GV10 GK20 H black by Pentac Polymer is a black colored, water insoluble polyamide (PA) 6.6 reinforced with 30% glass fiber and bead. Is heat stabilised and shows an isotropic shrinkage behavior and low creep tendency. Exhibits normal viscosity, good hardness, stiffness, abrasion-, heat-, hot water and solvent resistance. Possesses improved dimensional stability, surface quality as well as mechanical strength and toughness. PENTAMID® A GV10 GK20 H black by Pentac Polymer manufactured by Pentac Polymer is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers, door handles and automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A GK30 H LS black by Pentac Polymer is a black colored, water insoluble polyamide (PA) 6.6 reinforced with 30% glass bead. Is heat stabilised, laser markable and shows an isotropic shrinkage behavior. Exhibits normal viscosity, good dimensional stability, surface finish, hardness, stiffness, good abrasion and heat resistance. PENTAMID® A GK30 H LS black is suitable for processing by injection molding. Recommended for codifications (data matrix code/ QR code), logos, other labelling, beauty covers, low warpage housings, rotation symmetric parts, relay carriers and door handles. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A GV30 H LS natural by Pentac Polymer is a natural colored, heat stabilised polyamide (PA) 6.6 reinforced with 30% glass fiber. Is laser sensitive and possesses improved dimensional stability, surface quality, good hardness, stiffness, mechanical strength, toughness and low creep tendency. Exhibits normal viscosity, water insolubility, good abrasion-, heat-, hot water and solvent resistance. It is suitable for processing by injection molding. Recommended for codifications (data matrix code/ QR code), logos, other labelling and automotive applications including fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. PENTAMID® A GV30 H LS natural complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A GK30 H black by Pentac Polymer is a black colored, heat stabilised polyamide (PA) 6.6 reinforced with 30% glass bead. Shows an isotropic shrinkage behavior, good dimensional stability and surface finish. Exhibits normal viscosity, water insolubility, good hardness, stiffness, abrasion and heat resistance. PENTAMID® A GK30 H black is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers and door handles. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® A GV15 H natural by Pentac Polymer is a natural colored, water insoluble, heat stabilised polyamide (PA) 6.6 reinforced with 15% glass fiber. Exhibits normal viscosity, good hardness, stiffness, abrasion-, heat-, hot water and solvent resistance. Possesses good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® A GV15 H natural manufactured by Pentac Polymer is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® A CV20 H black by Pentac Polymer is a black colored, water insoluble, heat stabilised polyamide (PA) 6.6 reinforced with 20% carbon fiber. Is smooth, greasy and offers weight reduction, higher shock-, vibration adsorption, possible thermal and electrical conductivity. Exhibits normal viscosity, good hardness, stiffness, abrasion and heat resistance. It has best tribological properties (sliding friction, dry run condition) showing even better performances than parts made from metal. PENTAMID® A CV20 H black is suitable for processing by injection molding. Recommended for housings, covers, fan shrouds, rail tracks, spinning machines, bracket parts, slide bushes, valves, sliding rails, levers and transport slides. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards.
PENTAMID®
Plastics and elastomers supplied by Pentac Polymer