Return to supplier page
PENTAMID® AB S GV60 H black by Pentac Polymer is a black colored, heat stabilized, blend of polyamide 6.6 (PA 6.6) and polyamide 6 (PA 6) reinforced with 60% glass fiber. Possesses low viscosity, water insolubility, easy flow and a wider processing window. Exhibits good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® AB S GV60 H black by Pentac Polymer is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® L GV15 H black by Pentac Polymer is a black colored, water insoluble, heat stabilized polyamide 12 (PA 12) reinforced with 15% glass fiber. Exhibits normal viscosity, good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® L GV15 H black by Pentac Polymer is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® AB S GV60 H natural by Pentac Polymer is a natural colored, heat stabilized, blend of polyamide 6.6 (PA 6.6) and polyamide 6 (PA 6) reinforced with 60% glass fiber. Possesses low viscosity, water insolubility, easy flow and a wider processing window. Exhibits good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® AB S GV60 H natural by Pentac Polymer is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® AHT GV30 H1 black by Pentac Polymer is a black colored, heat stabilized, water insoluble polyamide 4.6 (PA 4.6) grade reinforced with 30% glass fiber. Possesses normal viscosity, easy flowability, low friction and better fatigue behavior. Provides higher melting temperature, higher crystallinity and a higher velocity of crystallization compared to polyamide 6 and polyamide 6.6. Offers higher water adsorption, good surface quality, mechanical strength, toughness and low creep tendency. Exhibits excellent hot oil-, temperature, water and chemical resistance. It is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. PENTAMID® AHT GV30 H1 black complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® L GV20 H black by Pentac Polymer is a black colored, water insoluble, heat stabilized polyamide 12 (PA 12) reinforced with 20% glass fiber. Exhibits normal viscosity, good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® L GV20 H black is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® B GV35 H2 RC S black by Pentac Polymer is a black colored, high heat stabilized, recompound or recyclate polyamide 6 (PA 6) reinforced with 35% glass fiber. Possesses normal viscosity, water insolubility, good toughness, high stiffness, rigidity and good processability. Provides easy flowability, low creep tendency, good dimensional stability and surface finish. Exhibits mechanical strength, excellent damping behavior, good impact and chemical resistance. PENTAMID® B GV35 H2 RC S black is suitable for processing by injection molding. Recommended for automotive applications including housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® A MK30 H black by Pentac Polymer is a black colored, water insoluble polyamide (PA) 6.6 reinforced with 30% mineral. Is heat stabilised and shows an isotropic shrinkage behavior. Exhibits normal viscosity, good hardness, stiffness, dimensional stability, surface finish, abrasion and heat resistance. PENTAMID® A MK30 H black by Pentac Polymer is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers and door handles. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011. PENTAMID® AB GV50 H natural by Pentac Polymer is a natural colored, heat stabilized, blend of polyamide 6.6 (PA 6.6) and polyamide 6 (PA 6) reinforced with 50% glass fiber. Possesses normal viscosity, water insolubility, excellent flowability and a wider processing window. Exhibits good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. PENTAMID® AB GV50 H natural by Pentac Polymer is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. Complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® AB GV30 H natural by Pentac Polymer is a natural colored, heat stabilized, blend of polyamide 6.6 (PA 6.6) and polyamide 6 (PA 6) reinforced with 30% glass fiber. Possesses normal viscosity, water insolubility, excellent flowability and a wider processing window. Exhibits good dimensional stability, surface quality, mechanical strength, toughness and low creep tendency. It is suitable for processing by injection molding. Recommended for automotive applications such as housings, fixation parts, gears, air intake manifolds, impact plugs, cooling water parts, gearshift housings and fan wheels. PENTAMID® AB GV30 H natural complies with UL 94 HB flame rating and meets with the requirements of European ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011 standards. PENTAMID® A MK40 H black by Pentac Polymer is a black colored, water insoluble polyamide (PA) 6.6 reinforced with 40% mineral. Is heat stabilised and shows an isotropic shrinkage behavior. Exhibits normal viscosity, good hardness, stiffness, dimensional stability, surface finish, abrasion and heat resistance. PENTAMID® A MK40 H black by Pentac Polymer is suitable for processing by injection molding. Recommended for beauty covers, low warpage housings, rotation symmetric parts, relay carriers and door handles. Complies with UL 94 HB flame rating and European regulations, ISO 9001:2008, ISO 14001:2009 and ISO 50001:2011.
PENTAMID®
Plastics and elastomers supplied by Pentac Polymer