Return to supplier page
TREXPRENE™ A80BW by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, UV- and heat stabilized polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to UV, chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A80BW by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive exterior parts with specifications - Nissan Part # 02001 LH / 02002 RH and GMW15812 Type 7 / GMP.E/P.120. TREXPRENE™ A88NU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A88NU is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. Complies with automotive specifications - WSD-M2D382-A1 and GMW15813 Type 8 / GMP.E/P.005. TREXPRENE™ A88BU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A88BU by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. Complies with automotive specifications - WSD-M2D382-A1 and GMW15813 Type 8 / GMP.E/P.005. TREXPRENE™ A80BU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A80BU by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. Complies with automotive specifications - WSD-M2D380-A1, MS-AR -20C / 100CGN, GM GMP.E/P.003 Color: Black and GMW15813 Type 6 / GMP.E/P.003. TREXPRENE™ D50NU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ D50NU is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. TREXPRENE™ D50NU by Mitsubishi Chemical Performance Polymers (MCPP) complies with automotive specifications - DX300001 and GMW15813 Type 10 / GMP.E/P.007. TREXPRENE™ D50BU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ D50BU by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. Complies with automotive specifications - Nissan Part# 4101 LH / 4102 RH, Mitsubishi Part # MR991091/92 and GMW15813 Type 9 / GMP.E/P.006. TREXPRENE™ A80NU by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized, soft polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A80NU by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive underhood applications such as mats, seals, gaskets, air ducts, constant velocity joint (CVJ) boots, protective coverings and grommets. Complies with automotive specifications - WSD-M2D381-A1, MS-AR -20D / 100DGN and GMW15813 Type 7 / GMP.E/P.004. TREXPRENE™ A80BI by Mitsubishi Chemical Performance Polymers (MCPP) is a 100% recyclable, heat stabilized polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Provides good resistance to chemical, heat aging, water and ozone. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A80BI by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive interior parts and underhood applications with specifications - WSD-M2D381-A2, WSS- M2D510-A8, IMDS ID 29572309, GM GMP.E/P.120 and GM GMW15816P-TPV (EPDM+PP) Type 7. TREXPRENE™ A67CW by Mitsubishi Chemical Performance Polymers (MCPP) is a pre-colored, 100% recyclable, UV- and heat stabilized polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, good compression set, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to UV, chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A67CW by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for automotive exterior parts. TREXPRENE™ A70CI by Mitsubishi Chemical Performance Polymers (MCPP) is a pre-colored, 100% recyclable, UV- and heat stabilized polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Exhibits easy processing, elastic recovery at elevated temperatures, low density and strong seals properties. Provides good resistance to UV, chemical, heat aging, water and ozone. Designed for extrusion and injection blow molding processing methods. TREXPRENE™ A70CI is recommended for automotive interior parts with specifications - TSM 5529 Class 2B and GM GMP.E/P.117.
TREXPRENE™
Plastics and elastomers supplied by Mitsubishi Chemical Performance Polymers (MCPP)
TREXPRENE™ TPVs by Mitsubishi Chemical Performance Polymers (MCPP) consists of heat stabilized, vulcanized PP / EPDM grades. They are available as: pre-colored, natural or standard black.
Key benefits of TREXPRENE™ series are:
- Good resistance to water, weather, ozone
- Wide range of hardness (45 Shore A to 50 Shore D)
- Excellent recovery properties
- Provides strong seals properties
- Excellent chemical resistance
- Superior UV resistance