Return to supplier page
SOARNOL™ V2504RB by Mitsubishi Chemical Performance Polymers (MCPP) is an ethylene vinyl alcohol (EVOH) copolymer grade. It offers low melt flow rate and good gas barrier property at normal humidity. SOARNOL™ V2504RB is suitable for co-extrusion blow-molded containers as well as co-extruded film applications. It complies with ISO 9001, FDA 21 CFR 177.1360, Commission Regulation (EU)No. 10/2011 and JHOSPA regulations. SOARNOL™ DC3203RB by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits excellent gas barrier property and low melt flow rate. SOARNOL™ DC3203RB is recommended for co-extrusion blow-molded containers, co-extruded film and tube applications. It complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21, C.F.R. and EU No. 10/2011. SOARNOL™ TF2905B by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It displays excellent thermoforming property and high barrier to gases. It is specifically designed for deep draw thermoforming applications using polystyrene and polyethylene structural layers. SOARNOL™ TF2905B complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21, C.F.R. and EU No. 10/2011. SOARNOL™ A4412HB by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits thermal durability and high melt flow rate. It is processed by extrusion. SOARNOL™ A4412HB can be used as oxygen barrier component of the under-floor heating pipe. It complies with ISO 2009. SOARNOL™ D2908HB by Mitsubishi Chemical Performance Polymers (MCPP) is an ethylene vinyl alcohol (EVOH) copolymer grade. It offers intermediate melt flow rate, better thermal durability and good oxygen barrier. It is processed by extrusion. SOARNOL™ D2908HB is suitable for under-floor heating pipe applications. It meets ISO 9001 regulations. SOARNOL™ BX6304B by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits high gas barrier and good thermoforming property. It is processed by extrusion and film & sheet thermoforming applications. SOARNOL™ BX6304B is recommended for film applications. It complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21, C.F.R. and EU No. 10/2011. SOARNOL™ DT2904RB by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits excellent gas barrier property at low humidity, good thermal stability and low melt flow rate. SOARNOL™ DT2904RB is recommended for co-extruded film and blow-molded containers. It complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21, C.F.R. and EU No. 10/2011. SOARNOL™ AT4403B by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits excellent water resistance, good gas barrier property especially in high humidity environments and low melt flow rate. It is processed by co-extrusion and blown film extrusion. SOARNOL™ AT4403B is recommended for shrink packaging. It complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21, C.F.R. and EU No. 10/2011. SOARNOL™ A4412 by Mitsubishi Chemical Performance Polymers (MCPP) is an ethylene vinyl alcohol (EVOH) copolymer grade. It offers high melt flow rate, excellent water resistance and good gas barrier property, especially in high humidity environments. It is processed by cast film extrusion, co-extrusion and coating. SOARNOL™ A4412 is recommended for co-extruded cast film and tube applications. It complies with ISO 9001, FDA 21 CFR 177.1360, Commission Regulation (EU)No. 10/2011 and JHOSPA regulations. SOARNOL™ DC3212B by Mitsubishi Chemical Performance Polymers (MCPP) is an odorless ethylene-vinyl alcohol copolymer (EVOH) grade. It exhibits excellent gas barrier property and high melt flow rate. SOARNOL™ DC3212B is recommended for co-extrusion coating & film and co-injection molded container applications. It complies with JAPAN Ministry of Health and Welfare Announcement No.370(1959), US FDA 21 C.F.R. and EU No. 10/2011.
SoarnoL™
Plastics and elastomers supplied by Mitsubishi Chemical Performance Polymers (MCPP)