Supplier Page
Daikin
OverviewProducts204Brands10Products families2News5

NEOFLON™ (Plastics and elastomers)

Supplied by Daikin
NEOFLON™ series by Daikin is a complete array of melt-processable fluoropolymers such as FEP, PFA, ETFE, PCTFE, suitable for a wide range of applications, such as automotive, semiconductor, E&E, aerospace, pipes and hoses, etc.

Key benefits of NEOFLON™ brand include:

  • PFA AP-Series: Excellent heat and chemical resistance, weatherability, melt-molded
  • FEP NP-Series: Melt moldable used in wire insulation, cable jackets, and tubes
  • ETFE EP-Series: Best mechanical strength and radiation-resistance, thermal, chemical, and electrical properties
  • EFEP RP-Series: Melt bonded to general purpose resins such as polyamides
  • CPT LP-Series: Excellent barrier properties against chemicals and organic solvents and can be melt bonded to polyamide, vulcanized bonded to NBR, ECO and other general-purpose rubbers
  • PCTFE M-Series: Excellent mechanical properties, especially hardness, and chemical resistance next to PTFE and PFA
  • VT VT-Series: Increase the electric conductivity and energy density of cathode ion batteries

50 Products match your search

NEOFLON™ PCTFE M-300H

by Daikin

NEOFLON™ PCTFE M-300H by Daikin is a high molecular weight, rigid, high performance, chlorotrifluoroethylene homopolymer. It shows excellent dimensional stability, heat seal, low moisture absorption, excellent thermal and chemical stability. It complies with ISO 9002 (Quality System) and ISO 14001 (Environmental System) regulations.<br> <ul style="padding-left: 40px;"><li>It exhibits good melt flow processability, high compressive strength, low deformation under load, low cold flow and low gas permeability.</li> <li>It is designed for compression molding processes.</li> <li>It is suitable for sheets, seals/gaskets, valve/pump parts (diagphragms, impellers, seats and plugs), translucent tubing, sight glasses, flowmeter tubes, heavy wall solid pipes and fittings, gears, cams and bearings, laboratory wire, heat exchangers, tanks, reaction vessels, autoclaves, drums and containers.</li><li>It is used in antisticking surfaces rolles, rollers on textiles, machines suction boxes, molds for plastic, production of toffee equipment dough chocolate and other food stuff, jackets, bellows, diagpharms and films.</li> <li>NEOFLON™ PCTFE M-300H is also used in electrical applications include molded components, terminal boards, coil forms, printed circuit boards, connector/random covers, tube sockets wire coatings, jackets potentiometers and switches.</li></ul>
See the product

NEOFLON™ FEP NP-1108

by Daikin

NEOFLON™ FEP NP-1108 is a melt processable fluorinated ethylene propylene copolymer (FEP) grade by Daikin. It is an extremely inert grade and exhibits excellent electrical- & good mechanical and very good low temperature properties.<br> <ul style="padding-left: 40px;"><li>Also exhibits high chemical stability, low friction and excellent long term weathering.</li> <li>NEOFLON™ FEP NP-1108 is used in high speed wire insulation, cable jacketing, extruded film, blown film, sheet extrusion and heat shrinkable tubing.</li> <li>It can be processed by injection molding and is also used in catheters, molded parts, equipment and pipe linings.</li></ul>
See the product

NEOFLON™ EFEP RP-4020

by Daikin

NEOFLON™ EFEP RP-4020 by Daikin is a high purity ethylene fluorinated ethylene propylene (EFEP) copolymer grade. Exhibits high transparency, improved heat sealing-, electrical- and non-sticking properties.<br> <ul style="padding-left: 40px;"><li>Offers low reactivity, thermal- and chemical stability, resistance to heat-, weather- and chemicals.</li> <li>Possesses low mold shrinkage, low coefficient of friction, low processing temperature and very low melt temperature.</li> <li>Designed for processing by tubing extrusion, compression- and injection molding.</li> <li>Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding.</li> <li>It allows hot melt adhesion to the other plastics such as polyamide with its reactive group.</li> <li>It is processes with other resins (nylons, EVOH, plastics, inorganic metals, glass, metals, modified PE and ETFE) without adhesive and etching.</li> <li>NEOFLON™ EFEP RP-4020 is recommended for bottles, containers, mono- and multi-layer tubing and films applications.</li></ul>
See the product

NEOFLON™ FEP NP-102

by Daikin

NEOFLON™ FEP NP-102 by Daikin is perfluoroethylene propylene (FEP) copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). Exhibits resistance to weather-, chemicals-, moisture-, light-, flame- and permeation. Provides high performance, lower melt viscosity and high transparency. Shows non-sticking properties, electrical reliability, low reactivity, low critical surface energy, chemical- and thermal stability. Possesses low dielectric constant and dissipation factor with high dielectric strength over a wide range of frequencies & temperatures. It is suitable for injection molding and high speed extrusion of thin coatings of small wire sizes such as plenum cable insulation. Recommended for tubes, small parts, wires- and cable coatings. NEOFLON™ FEP NP-102 complies with FDA 21 CFR.177.1550, ISO-9001 (Quality System), ISO-14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
See the product

NEOFLON EP-620AS

by Daikin

NEOFLON EP-620AS by Daikin is copolymer of tetrafluoroethylene and ethylene grade. It incorporates conductivity, which is chemically stable and electrically unique. It exhibits good mechanical properties, processability and radiation resistance & melt flowability and low specific gravity. NEOFLON EP-620AS is good for both extrusion and injection molding applications.
See the product

NEOFLON™ FEP NP-130

by Daikin

NEOFLON™ FEP NP-130 by Daikin is a perfluoroethylene propylene (FEP) copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). It exhibits high stress crack resistance, resistance to weather-, chemicals-, moisture-, light-, flame- and permeation. It provides low melt viscosity and high transparency. It shows non-sticking properties, electrical reliability, chemical stability, low reactivity, low critical surface energy, thermal- and chemical stability. It possesses good processability, low dielectric constant, dissipation factor with high dielectric strength over a wide range of frequencies and temperatures. It is suitable for sheet by extrusion process. It is recommended for thick wall wire & cable insulation, jacket and tubing. NEOFLON™ FEP NP-130 complies with FDA 21 CFR.177.1550, ISO 9001 (Quality System), ISO 14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
See the product

NEOFLON™ VT 6630

by Daikin

NEOFLON™ VT 6630 by Daikin is a melt-processable tetrafluoroethylene and vinylidene fluoride copolymer grade. Exhibits high relative dielectric constant, thermal stability, good mechanical properties at high temperature and good chemical resistance. Offers impact resistance at low temperature, high creep resistance and good fatigue resistance. NEOFLON™ VT 6630 is suitable for processing by extrusion and injection molding. Used in seasl, gaskets, tubes, film capacitors and high dielectric film applications.
See the product

NEOFLON™ FEP NP-101

by Daikin

NEOFLON™ FEP NP-101 by Daikin is a perfluoroethylene propylene (FEP) copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). Possesses low dielectric constant, dissipation factor with high dielectric strength over a wide range of frequencies and temperatures. Exhibits high performance, low melt viscosity, high transparency, resistance to weather-, chemicals-, moisture-, light-, flame- and permeation. Shows non-sticking properties, electrical reliability, low reactivity, low critical surface energy, thermal- and chemical stability. Suitable for high speed extrusion of thin coatings of small wire sizes and injection molding of thin wall parts. Recommended for small tubing, high speed wires and cable coatings. NEOFLON™ FEP NP-101 complies with FDA 21 CFR.177.1550, ISO 9001 (Quality System), ISO 14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
See the product

NEOFLON™ ETFE EP-546

by Daikin

NEOFLON™ ETFE EP-546 by Daikin is a copolymer of tetrafluoroethylene (TFE) and ethylene. Exhibits high transparency, lower melt viscosity, chemical stability, low reactivity, excellent resistance to heat-, chemicals-, permeation-, weather- and UV. Possesses low dielectric constant, dissipation factor, good tensile strength, high dielectric strength over a wide range of frequencies and temperatures. Offers the low critical surface energy and very low light reflection. Suitable for injection and extrusion processes. Recommended for wire insulation, containers, tubes, electric- and electronic parts. NEOFLON™ ETFE EP-546 complies with FDA 21 CFR.177.1550, ISO-9001 (Quality System), ISO-14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
See the product

NEOFLON™ PCTFE M-300P

by Daikin

NEOFLON™ PCTFE M-300P by Daikin is a rigid, high performance, general purpose, chlorotrifluoroethylene (CTFE) homopolymer. Exhibits good melt flow processability, high compressive strength, low deformation under load, low cold flow and low gas permeability. Shows excellent dimensional stability, heat seal, low moisture absorption, excellent thermal- and chemical stability. Designed for extrusion and injection molding processes. Suitable for rods, small parts, seals/gaskets, valve/pump parts (diagphragms, impellers, seats, plugs), translucent tubing, sight glasses, flowmeter tubes, heavy wall solid pipes/fittings, gears, cams/bearings, laboratory wire, heat exchangers, tanks, reaction vessels, autoclaves, drums and containers. Used in antisticking surfaces rolles- and rollers on textiles, machines suction boxes, molds for platic, production of toffee equipment dough chocolate, food stuff, jackets, bellows, diagpharms and films. Electrical applications include molded components, terminal boards, coil forms, printed circuit boards, connector/random covers,tube sockets wire coatings, jackets potentiometers and switches. NEOFLON™ PCTFE M-300P complies with ISO 9002 (Quality System) and ISO 14001 (Environmental System) regulations.
See the product
Showper page

Most Popular Brands

DAI-EL™

by Daikin

95 products
See All Products

NEOFLON™

by Daikin

50 products
See All Products

POLYFLON™

by Daikin

35 products
See All Products

NEOFLON FEP

by Daikin

8 products
See All Products