Return to supplier page
E-TEC® PP 10542 by Colloids is an electrically conductive modified polypropylene polymer grade based on a dispersion of a conductive carbon black. It can be processed using injection molding and thin sheet extrusion including multi-wall corrugated sheet. Designed for use as a compound at 100% addition rate. E-TEC® PP 10542 is recommended for articles like tote boxes, these products find an application in areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PE 4329 by Colloids is an electrically conductive polyethylene copolymer grade based on a high loading dispersion of a conductive carbon black in an ethylene copolymer blend. It can be processed using injection molding and film extrusion. Designed for use as a compound at 100% addition rate. E-TEC® PE 4329 is recommended for articles that require a level of permanent electrical conductivity, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Film produced from E-TEC® PE 4329 can be fabricated by conventional methods of bag making, sealing etc. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® 13731 by Colloids is an electrically conductive modified polystyrene grade based on a dispersion of a conductive carbon black. Exhibits superior surface finish and low shrinkage than materials based on polyolefins. It can be processed using injection molding and extrusion. Designed for use as a compound at 100% addition rate. E-TEC® PS 13731 is recommended for rigid articles requiring a degree of permanent electrical conductivity such as tote boxes, storage racks and other containers, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PS 13680 by Colloids is an electrically conductive modified polystyrene grade based on a dispersion of a conductive carbon black. Exhibits higher impact and low shrinkage than materials based on polyolefins. It can be processed using injection molding and extrusion. Designed for use as a compound at 100% addition rate. E-TEC® PS 13680 is recommended for rigid articles requiring a degree of permanent electrical conductivity such as tote boxes, storage racks and other containers, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® ABS 11368 by Colloids is a permanent antistatic ABS (acrylonitrile butadiene styrene) grade uses a non-migratory additive system. Designed to be extruded or molded without dilution. E-TEC® ABS 11368 specially formulated for applications where varying degrees of permanent electrical conductivity are required. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PP 11357 by Colloids is a medium flow, permanent antistatic high impact polypropylene copolymer grade uses a non-migratory additive system and exhibits good balance between rigidity and toughness. E-TEC® PP 11357 can be processed using sheet extrusion and injection molding. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PC/ABS 13491 by Colloids is a high strength, electrically conductive polycarbonate/acrylonitrile butadiene styrene (PC/ABS) grade based on dispersion of a conductive carbon black. Unaffected by atmospheric humidity and are normally permanent during the lifetime of a product. It can be processed using injection molding and extrusion of rigid sheet or tubing. Designed for use as a compound at 100% addition rate. E-TEC® PC/ABS 13491 is recommended for electronics assembly and explosives handling where permanent elimination of static electricity is required. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PA 4332 by Colloids is an electrically conductive polyamide 6 polymer grade based on dispersion of a conductive carbon black. It can be processed using injection molding and extrusion. Designed for use as a compound at 100% addition rate and ideal for higher operating temperatures. Can also be used at higher operating temperatures than is normal for conductive compounds based on polyolefins. E-TEC® PA 4332 is recommended for rigid articles having a limited degree of self-lubricating character, such applications find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PP 50/CON/2 by Colloids is an electrically conductive modified polypropylene polymer grade based on a dispersion of a conductive carbon black. Exhibits higher stiffness than other E-TEC® PP grades. It can be processed using injection molding. Designed for use as a compound at 100% addition rate. E-TEC® PP 50/CON/2 is recommended for rigid articles requiring a degree of permanent electrical conductivity such as tote boxes and other containers, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009. E-TEC® PP 13579 by Colloids is an electrically conductive modified polypropylene polymer based on a dispersion of a conductive carbon black. Exhibits higher stiffness than other E-TEC® PP grades. It can be processed using injection molding. Designed for use as a compound at 100% addition rate. E-TEC® PP 13579 is recommended for rigid articles requiring a degree of permanent electrical conductivity such as tote boxes and other containers, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009.
E-TEC®
Plastics and elastomers supplied by Colloids
10 Products match your search
E-TEC® PP 10542
by Colloids
E-TEC® PE 4329
by Colloids
E-TEC® PS 13731
by Colloids
E-TEC® PS 13680
by Colloids
E-TEC® ABS 11368
by Colloids
E-TEC® PP 11357
by Colloids
E-TEC® PC/ABS 13491
by Colloids
E-TEC® PA 4332
by Colloids
E-TEC® PP 50/CON/2
by Colloids
E-TEC® PP 13579
by Colloids
Showper page