E-TEC® PP 10542 by Colloids is an electrically conductive modified polypropylene polymer grade based on a dispersion of a conductive carbon black. It can be processed using injection molding and thin sheet extrusion including multi-wall corrugated sheet. Designed for use as a compound at 100% addition rate. E-TEC® PP 10542 is recommended for articles like tote boxes, these products find an application in areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009.
E-TEC® PE 4329 by Colloids is an electrically conductive polyethylene copolymer grade based on a high loading dispersion of a conductive carbon black in an ethylene copolymer blend. It can be processed using injection molding and film extrusion. Designed for use as a compound at 100% addition rate. E-TEC® PE 4329 is recommended for articles that require a level of permanent electrical conductivity, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Film produced from E-TEC® PE 4329 can be fabricated by conventional methods of bag making, sealing etc. Complies with ISO 9001:2008 and ISO/TS 1649:2009.
E-TEC® 13731 by Colloids is an electrically conductive modified polystyrene grade based on a dispersion of a conductive carbon black. Exhibits superior surface finish and low shrinkage than materials based on polyolefins. It can be processed using injection molding and extrusion. Designed for use as a compound at 100% addition rate. E-TEC® PS 13731 is recommended for rigid articles requiring a degree of permanent electrical conductivity such as tote boxes, storage racks and other containers, such application find areas where the accumulation of static electrical charges on conventional polymers may cause problems, for example in the handling of static sensitive electronic devices or explosives. Complies with ISO 9001:2008 and ISO/TS 1649:2009.
