Return to supplier page
3M™ Dyneon™ Fluoroplastic THV 500GZ by 3M is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. It shows good chemical resistance, low temperature processability, optical clarity and light transmission. Provides high transparency, high flexibility, bondability to itself and other substrates (for multi-layer constructions), low flammability, excellent performance with respect to dynamic testing and permeation resistance to fuels. Possesses excellent weatherability, thermal stability, UV stability, good anti-soiling properties and low refractive index. 3M™ Dyneon™ Fluoroplastic THV 500GZ is suitable for processing by extrusion and injection molding. Processing profile allows co-processing with olefinic plastics and hydrocarbon elastomers. Used in extruded films, tubes, profiles, wire coatings and as a barrier layer in automotive fuel hoses and seals in chemical containment to protective layers in photovoltaic backsheets. 3M™ Dyneon™ Perfluoroelastomer PFE 40Z by 3M is a peroxide curable perfluoroelastomer (FFKM) grade. Exhibits improved acid-, water-, steam- and compression set resistance. Offers very broad chemical and thermal stability. Shows low metal ion content with low extractables in a wide range of chemicals. 3M™ Dyneon™ Perfluoroelastomer PFE 40Z is recommended for mechanical seals, valves, pumps, reactors, mixers, ink/printing systems, painting systems and rubber-metal bonding parts. 3M™ Dyneon™ PTFE Granules TF 1620 by 3M is a semi-free-flowing suspension PTFE produced by suspension polymerization. Is suitable for processing by compression molding. Provides good surface quality of molded articles, excellent chemical inertness, low friction behavior, good flame retardance, exceptional temperature resistance and reduced molding pressure. 3M™ Dyneon™ PTFE Granules TF 1620 exhibits good electrical and mechanical properties. Used in large compression molded sheets, iso-statically molded articles, shaped parts, thinner wall articles (like bellows etc.) and for skived films of > 200 µm. Meets ASTM D 4894 Type IV, Grade 2 classification. 3M™ Dyneon™ Fluoroelastomer FC 2120 by 3M-Dyneon is a bisphenol cured, low viscosity fluoroelastomer. It contains 65.9% fluorine content. It is a di-polymer of vinylidene fluoride and hexafluoropropylene. Exhibits good temperature resistance and low permeation. It can be processed by injection molding, transfer molding, extrusion and calendering. Designed for hoses, profiles, transportation,? rubber, plastic,? electrical,? oil & gas,? defense,? CPI/ semicon and? mining applications. 3M™ Dyneon™ Fluoroelastomer FC 2120 has a shelf life of 3 years. 3M™ Dyneon™ Fluoroelastomer FC 2122 by 3M is a low viscosity fluoroelastomer. It is bisphenol cured with 65.9% fluorine content. It is a di-polymer of vinylidene fluoride and hexafluoropropylene. Exhibits excellent mold release, low permeation and very high elongation. Offers good temperature resistance and fast curing. It can be processed by injection molding, transfer molding, extrusion and calendering. Designed for O-rings & molded goods, transportation, rubber, plastic, electrical, oil & gas, defense, CPI/ semicon and mining applications. It has a shelf life of 3 years. 3M™ Dyneon™ PTFE Powder TF 1750 by 3M is a non-free-flowing suspension PTFE produced by suspension polymerization. Is suitable for processing by compression molding. Exhibits low molding pressure, low friction behavior, good electrical and mechanical properties, excellent chemical inertness, good flame retardance and exceptional temperature resistance. 3M™ Dyneon™ PTFE Powder TF 1750 is most preferred basic material for filled PTFE compounds. Used in applications like skived films, sheets and gaskets. Meets ASTM D 4894 Type II classification. 3M™ Dyneon™ TFM™ Modified PTFE 1700 by 3M is a modified non-free-flowing suspension PTFE of the 2nd generation produced by suspension polymerization. Is suitable for processing by compression molding. Exhibits improved particle coalescence, low permeability and good electrical and mechanical properties. Provides dense polymer structure with reduced void content, lower deformation under load and increased modulus of elasticity. Possesses good weldability, excellent chemical inertness, low friction, good flame retardance and high temperature resistance. 3M™ Dyneon™ TFM™ Modified PTFE 1700 is recommended for shaped cylinders or blocks, skived films of >20 µm, linings in the chemical processing industry (CPI) and seals and is suitable as basic material for filled PTFE (compounds). Meets ASTM D 4894 Type III, Grade 1 classification. 3M™ Dyneon™ PTFE Granules TF 1641 by 3M is a free-flowing suspension PTFE produced by suspension polymerization. Is suitable for processing by compression molding. Provides good surface quality of molded articles, excellent chemical inertness, low friction behavior, good flame retardance and exceptional temperature resistance. Exhibits good mold filling behavior, good electrical and mechanical properties. 3M™ Dyneon™ PTFE Granules TF 1641 is used in applications like sealing, shaped parts, automatically or iso-statically molded articles e.g. lined pipes and valves or small parts like valve seats. Meets ASTM D 4894 Type IV, Grade 2 classification. 3M™ Dyneon™ PTFE Dispersion TF 5070GZ by 3M is a milky-white, water-based fluoropolymer dispersion reinforced with glass bubbles. The dispersion has a solid content of 50%. The spherical hydrophobic polymer particles have an average size of 120 nm and a density of 2.2 g/ml. Filler and color pigments can be added to the dispersion. Is suitable for coatings formulations. For coating metal surfaces various techniques such as spray coating, roller coating and silk-screen coating can be employed. Possesses large operating temperature range, small particle size and low settling tendency. 3M™ Dyneon™ PTFE Dispersion TF 5070GZ shows good chemical resistance and good non-stick properties. Due to its small particle size the dispersion is used as an additive to conventional PTFE dispersions so as to achieve a better packing density to the films. These improvements can lead to less corrosion, improved abrasion characteristics and increased shine. Used in non-stick coatings for manufacturing cookware and baking tins. Complies with FDA, 21CFR 177.1550 and German Federal Ministry of Health (BGA). 3M™ Dyneon™ PTFE Dispersion TF 5060GZ by 3M is a milky-white, water-based fluoropolymer dispersion with a solid content of 59%. The spherical hydrophobic polymer particles have an average size of 210 nm and a density of 2.2 g/ml. Is suitable for coatings or impregnating fabric structures. 3M™ Dyneon™ PTFE Dispersion TF 5060GZ provides high sintering temperature, thus glass and aramid fabrics are particularly suitable. Possesses large operating temperature range, good wetting properties, low settling tendency and high transparency. Shows good chemical resistance, excellent film formation and good non-stick properties. PTFE-coated fabrics, felts and packages are mainly used for products such as conveyor belts and baking foil in architecture and for filters or slide seal rings. Complies with FDA, 21CFR 177.1550 and German Federal Ministry of Health (BGA).
3M™ Dyneon™
Plastics and elastomers supplied by 3M
213 Products match your search
3M™ Dyneon™ Fluoroplastic THV 500GZ
by 3M
3M™ Dyneon™ Perfluoroelastomer PFE 40Z
by 3M
3M™ Dyneon™ PTFE Granules TF 1620
by 3M
3M™ Dyneon™ Fluoroelastomer FC 2120
by 3M
3M™ Dyneon™ Fluoroelastomer FC 2122
by 3M
3M™ Dyneon™ PTFE Powder TF 1750
by 3M
3M™ Dyneon™ TFM™ Modified PTFE 1700
by 3M
3M™ Dyneon™ PTFE Granules TF 1641
by 3M
3M™ Dyneon™ PTFE Dispersion TF 5070GZ
by 3M
- Sustainable option
3M™ Dyneon™ PTFE Dispersion TF 5060GZ
by 3M
- Sustainable option