Return to supplier page
3M™ Dyneon™ Fluoroplastic THV 500GZ by 3M is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. It shows good chemical resistance, low temperature processability, optical clarity and light transmission. Provides high transparency, high flexibility, bondability to itself and other substrates (for multi-layer constructions), low flammability, excellent performance with respect to dynamic testing and permeation resistance to fuels. Possesses excellent weatherability, thermal stability, UV stability, good anti-soiling properties and low refractive index. 3M™ Dyneon™ Fluoroplastic THV 500GZ is suitable for processing by extrusion and injection molding. Processing profile allows co-processing with olefinic plastics and hydrocarbon elastomers. Used in extruded films, tubes, profiles, wire coatings and as a barrier layer in automotive fuel hoses and seals in chemical containment to protective layers in photovoltaic backsheets. 3M™ Dyneon™ Perfluoroelastomer PFE 40Z by 3M is a peroxide curable perfluoroelastomer (FFKM) grade. Exhibits improved acid-, water-, steam- and compression set resistance. Offers very broad chemical and thermal stability. Shows low metal ion content with low extractables in a wide range of chemicals. 3M™ Dyneon™ Perfluoroelastomer PFE 40Z is recommended for mechanical seals, valves, pumps, reactors, mixers, ink/printing systems, painting systems and rubber-metal bonding parts. 3M™ Dyneon™ Fluoroplastic PVDF 110080001 by 3M-Dyneon is a polyvinlylidene fluoride (PVDF) copolymer made from vinylidene fluoride (VF2) and hexafluoropropylene (HFP). It is suitable for processing by melt extrusion techniques and injection molding for smooth surface parts. It is ideal for high speed extrusion. It exhibits high abrasion-, heat aging-, chemical-, solvent-, flame and smoke resistance and resistance to UV and nuclear radiation. It possesses excellent dimensional stability, improved flexibility over PVDF homopolymer, high strength, toughness, smooth or anti-fouling surface, excellent weatherability and low permeability to most gases and liquids. It allows long term use of temperatures up to 150°C. It is used in chemical processing, wire and cable, electronics like semiconductor, automotive, building, food processing, pharmaceutical, battery applications and in oil & gas industries. 3M™ Dyneon™ Fluoroplastic PVDF 110080001 is recommended for plenum rating jacketing and tubes with UL 150°C rating in numerous cable constructions and fiber raceway designs. 3M™ Dyneon™ PTFE Granules TF 1620 by 3M is a semi-free-flowing suspension PTFE produced by suspension polymerization. Is suitable for processing by compression molding. Provides good surface quality of molded articles, excellent chemical inertness, low friction behavior, good flame retardance, exceptional temperature resistance and reduced molding pressure. 3M™ Dyneon™ PTFE Granules TF 1620 exhibits good electrical and mechanical properties. Used in large compression molded sheets, iso-statically molded articles, shaped parts, thinner wall articles (like bellows etc.) and for skived films of > 200 µm. Meets ASTM D 4894 Type IV, Grade 2 classification. 3M™ Dyneon™ Fluoroelastomer FC 2120 by 3M-Dyneon is a bisphenol cured, low viscosity fluoroelastomer. It contains 65.9% fluorine content. It is a di-polymer of vinylidene fluoride and hexafluoropropylene. Exhibits good temperature resistance and low permeation. It can be processed by injection molding, transfer molding, extrusion and calendering. Designed for hoses, profiles, transportation,? rubber, plastic,? electrical,? oil & gas,? defense,? CPI/ semicon and? mining applications. 3M™ Dyneon™ Fluoroelastomer FC 2120 has a shelf life of 3 years. 3M™ Dyneon™ Fluoroelastomer FC 2122 by 3M is a low viscosity fluoroelastomer. It is bisphenol cured with 65.9% fluorine content. It is a di-polymer of vinylidene fluoride and hexafluoropropylene. Exhibits excellent mold release, low permeation and very high elongation. Offers good temperature resistance and fast curing. It can be processed by injection molding, transfer molding, extrusion and calendering. Designed for O-rings & molded goods, transportation, rubber, plastic, electrical, oil & gas, defense, CPI/ semicon and mining applications. It has a shelf life of 3 years. 3M™ Dyneon™ Ultra High Purity PFA FLEX8515UHPZ by 3M is a perfluoroalkoxy (PFA) copolymer containing fluids. Shows longer life in fluid formulations when fluorosurfactants are present. Is suitable for processing by extrusion, transfer-, compression- and injection molding. 3M™ Dyneon™ Ultra High Purity PFA FLEX8515UHPZ possesses low viscosity, good clarity, ultra-low levels of extractable ions, wide service temperature range up to 240°C, smooth surface appearance, improved flexibility and high stress crack resistance to stress cracking chemicals or such agents that specifically contain fluorosurfactants. Used in low shear processes like thick walled extrusion, linings, transfer molding or tube extrusion and wet chemical processes in the semiconductor industry. 3M™ Dyneon™ Fluoroelastomer FLS 2650 by 3M-Dyneon is a high fluorine, peroxide-cured fluoroelastomer. It is a terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. Offers improved water and steam resistance over conventional fluoroelastomers (FKM). It can be processed by compression molding and transfer molding. Can be used in blends with fluorosilicone, silicone, EDPM and other peroxide-curable elastomers. Recommended for transportation,? rubber, plastic,? electrical,? oil & gas,? defense,? CPI/ semicon and mining industries. Shelf life of 3M™ Dyneon™ Fluoroelastomer FLS 2650 is 3 years. 3M™ Dyneon™ TFM™ Modified PTFE Powder TFM 1705 by 3M is a modified non-free-flowing suspension PTFE of the 2nd generation produced by suspension polymerization. Is suitable for processing by compression molding. Exhibits improved particle coalescence, low permeability, and good electrical and mechanical properties. Provides dense polymer structure with reduced void content, lower deformation under load, improved flex life characteristics and increased modulus of elasticity. Possesses gel stability, good weldability, excellent chemical inertness, low friction, good flame retardance and high temperature resistance. 3M™ Dyneon™ TFM™ Modified PTFE Powder TFM 1705 is recommended for diaphragms, shaped parts, large walled cylinders or blocks with reduced elephant foot, skived films of >20 µm, linings in the chemical processing industry (CPI) and in valve and pump diaphragms with improved flex life. Meets ASTM D 4894 Type III, Grade 1 classification. 3M™ Dyneon™ TFM™ Modified PTFE Granules TFM 1600 by 3M is a modified free-flowing suspension PTFE of the 2nd generation produced by suspension polymerization. Is suitable for processing by compression molding and ram extrusion. Exhibits good mold filling behavior, free-flowing properties, improved particle coalescence, low permeability and good electrical and mechanical properties. Provides dense polymer structure with reduced void content, lower deformation under load and increased modulus of elasticity. Possesses good weldability, excellent chemical inertness, low friction, good flame retardance and high temperature resistance. 3M™ Dyneon™ TFM™ Modified PTFE Granules TFM 1600 is recommended for shaped parts, skived films of >500 µm, linings in the chemical processing industry (CPI), sealing and ball valve seat applications as well as ram-extruded semi-finished articles. Meets ASTM D 4894 Type III, Grade 2 classification.
3M™ Dyneon™ (Plastic Parts)
Plastics and elastomers supplied by 3M